View all text of Subpart F [§ 1039.501 - § 1039.525]
§ 1039.510 - Which duty cycles do I use for transient testing?
(a) Measure emissions by testing the engine on a dynamometer with one of the following transient duty cycles to determine whether it meets the transient emission standards in § 1039.101(a):
(1) For variable-speed engines, use the transient duty cycle described in appendix VI of this part.
(2) [Reserved]
(b) The transient test sequence consists of an initial run through the transient duty cycle from a cold start, 20 minutes with no engine operation, then a final run through the same transient duty cycle. Calculate the official transient emission result from the following equation: