View all text of Subpart H [§ 178.251—178.253 - § 178.277]
§ 178.255-14 - Marking.
(a) In addition to markings required by Section VIII of the ASME Code (IBR, see § 171.7 of this subchapter), every tank shall bear permanent marks at least 1/8-inch high stamped into the metal near the center of one of the tank heads or stamped into a plate permanently attached to the tank by means of brazing or welding or other suitable means as follows:
Manufacturer's name ______________ Serial No. DOT specification Nominal capacity ______________ (gallons) Tare weight ______________ (pounds) Date of manufacture(b) [Reserved]