(a) An applicant must provide—

(1) Dimensioned three-view drawings or photographs of the reusable suborbital rocket; and

(2) Gross liftoff weight and thrust profile of the reusable suborbital rocket.

(b) An applicant must describe—

(1) All reusable suborbital rocket systems, including any structural, flight control, thermal, pneumatic, hydraulic, propulsion, electrical, environmental control, software and computing systems, avionics, and guidance systems used in the reusable suborbital rocket;

(2) The types and quantities of all propellants used in the reusable suborbital rocket;

(3) The types and quantities of any hazardous materials used in the reusable suborbital rocket;

(4) The purpose for which a reusable suborbital rocket is to be flown; and

(5) Each payload or payload class planned to be flown.

(c) An applicant must identify any foreign ownership of the applicant as follows:

(1) For a sole proprietorship or partnership, identify all foreign ownership,

(2) For a corporation, identify any foreign ownership interests of 10% or more, and

(3) For a joint venture, association, or other entity, identify any participating foreign entities.

To obtain an experimental permit an applicant must make the demonstrations and provide the information required by this section.

(a) This subpart. An applicant must provide a program description, a flight test plan, and operational safety documentation as required by this subpart.

(b) Other regulations—(1) Environmental—(i) General. The FAA is responsible for complying with the procedures and policies of the National Environmental Policy Act (NEPA) and other applicable environmental laws, regulations, and Executive Orders to consider and document the potential environmental effects associated with proposed reusable suborbital rocket launches or reentries. An applicant must provide the FAA with information needed to comply with such requirements. The FAA will consider and document the potential environmental effects associated with proposed reusable suborbital rocket launches or reentries.

(ii) Environmental Impact Statement or Environmental Assessment. When directed by the FAA, an applicant must—

(A) Prepare an Environmental Assessment with FAA oversight;

(B) Assume financial responsibility for preparation of an Environmental Impact Statement by an FAA-selected and -managed consultant contractor; or

(C) Submit information to support a written re-evaluation of a previously submitted Environmental Assessment or Environmental Impact Statement.

(iii) Categorical exclusion. The FAA may determine that a categorical exclusion determination is appropriate upon receipt of supporting information from an applicant.

(iv) Information requirements. An application must include an approved FAA Environmental Assessment, Environmental Impact Statement, categorical exclusion determination, or written re-evaluation covering all planned licensed activities in compliance with NEPA and the Council on Environmental Quality Regulations for Implementing the Procedural Provisions of NEPA.

(2) Financial responsibility. An applicant must provide the information required by part 3 of appendix A of part 440 for the FAA to conduct a maximum probable loss analysis.

(3) Human space flight. An applicant proposing launch or reentry with flight crew or a space flight participant on board a reusable suborbital rocket must demonstrate compliance with §§ 460.5, 460.7, 460.11, 460.13, 460.15, 460.17, 460.51, and 460.53 of this subchapter.

(c) Use of a safety element approval. If an applicant proposes to use any reusable suborbital rocket, safety system, process, service, or personnel for which the FAA has issued a safety element approval under part 414 of this chapter, the FAA will not reevaluate that safety element to the extent its use is within its approved scope. As part of the application process, the FAA will evaluate the integration of that safety element into vehicle systems or operations.

(d) Inspection before issuing a permit. Before the FAA issues an experimental permit, an applicant must make each reusable suborbital rocket planned to be flown available to the FAA for inspection. The FAA will determine whether each reusable suborbital rocket is built as represented in the application.

(e) Other requirements. The FAA may require additional analyses, information, or agreements if necessary to protect public health and safety, safety of property, and national security and foreign policy interests of the United States.

An applicant must—

(a) Describe any flight test program, including estimated number of flights and key flight-safety events.

(b) Identify and describe the geographic coordinates of the boundaries of one or more proposed operating areas where it plans to perform its flights and that satisfy § 437.57(b) of subpart C. The FAA may designate one or more exclusion areas in accordance with § 437.57(c) of subpart C.

(c) For each operating area, provide the planned maximum altitude of the reusable suborbital rocket.

An applicant must demonstrate how it will meet the requirements of § 437.53(a) and (b) to establish a safety clear zone and verify that the public is outside that zone before and during any hazardous operation.

(a) An applicant must perform a hazard analysis that complies with § 437.55(a).

(b) An applicant must provide to the FAA all the results of each step of the hazard analysis required by paragraph (a) of this section.

(a) An applicant must identify, describe, and provide verification evidence of the methods and systems used to meet the requirement of § 437.57(a) to contain its reusable suborbital rocket's instantaneous impact point within an operating area and outside any exclusion area. The description must include, at a minimum—

(1) Proof of physical limits on the ability of the reusable suborbital rocket to leave the operating area; or

(2) Abort procedures and other safety measures derived from a system safety engineering process.

(b) An applicant must identify, describe, and provide verification evidence of the methods and systems used to meet the requirements of § 437.59 to conduct any key flight-safety event so that the reusable suborbital rocket's instantaneous impact point, including its expected dispersions, is over unpopulated or sparsely populated areas, and to conduct each reusable suborbital rocket flight so that the reentry impact point does not loiter over a populated area.

An applicant must demonstrate that each location for nominal landing or any contingency abort landing of the reusable suborbital rocket, and each location for any nominal or contingency impact or landing of a component of that rocket, satisfies § 437.61.

An applicant must enter into the agreements required by § 437.63, and provide a copy to the FAA.

An applicant must identify and describe each method or system used to meet the tracking requirements of § 437.67.

An applicant must provide flight rules as required by § 437.71.

An applicant must submit a mishap plan that meets the requirements of § 450.173 of this chapter.