(a) The term Act means the Wool Products Labeling Act of 1939, 15 U.S.C. 68 et seq., as amended by Public Law 96-242, 94 Stat. 344, and Public Law 109-428, 120 Stat. 2913.

(b) The terms rule, rules, regulations and rules and regulations mean the rules and regulations prescribed by the Commission pursuant to the Act.

(c) The term ornamentation means any fibers or yarns imparting a visibly discernible pattern or design to a yarn or fabric.

(d) The term fiber trademark means a word or words used by a person to identify a particular fiber produced or sold by him and to distinguish it from fibers of the same generic class produced or sold by others. Such term shall not include any trademark, product mark, house mark, trade name or other name which does not identify a particular fiber.

(e) The terms required information or information required mean such information as is required to be disclosed on the required stamp, tag, label or other means of identification under the Act and regulations.

(f) The definitions of terms contained in section 2 of the Act shall be applicable also to such terms when used in rules promulgated under the Act.

(g) The term United States means the several States, the District of Columbia, and the territories and possessions of the United States.

(h) The terms mail order catalog and mail order promotional material mean any materials, used in the direct sale or direct offering for sale of wool products, that are disseminated to ultimate consumers in print or by electronic means, other than by broadcast, and that solicit ultimate consumers to purchase such wool products by mail, telephone, electronic mail, or some other method without examining the actual product purchased.

(i) The terms label, labels, labeled, and labeling mean the stamp, tag, label, or other means of identification, or authorized substitute therefore, required to be on or affixed to wool products by the Act or Regulations and on which the information required is to appear.

(j) The terms invoice and invoice or other document have the meaning set forth in § 303.1(h) of this chapter.

(k) The term trimmings has the meaning set forth in § 303.12 of this chapter.

Each and every wool product subject to the act shall be marked by a stamp, tag, label, or other means of identification, in conformity with the requirements of the act and the rules and regulations thereunder.

(a) The marking of wool products under the Act shall be in the form of a stamp, tag, label or other means of identification, showing and displaying upon the product the required information legibly, conspicuously, and nondeceptively. The information required to be shown and displayed upon the product in the stamp, tag, label, or other mark of identification, shall be that which is required by the Act and the rules and regulations thereunder, including the following:

(1) The fiber content of the product specified in section 4(a)(2)(A) of the Act. The generic names and percentages by weight of the constituent fibers present in the wool product, exclusive of permissive ornamentation, shall appear on such label with any percentage of fiber or fibers designated as “other fiber” or “other fibers” as provided by section 4(a)(2)(A)(4) of the Act appearing last

(2) The maximum percentage of the total weight of the wool product of any nonfibrous loading, filling or adulterating matter as prescribed by section 4(a)(2)(B) of the Act.

(3) The name or registered identification number issued by the Commission of the manufacturer of the wool product or the name or registered identification number of one or more persons subject to section 3 of the Act with respect to such wool product.

(4) The name of the country where the wool product was processed or manufactured.

(b) In disclosing the constituent fibers in information required by the Act and regulations in this part or in any non-required information, no fiber present in the amount of less than 5 percent shall be designated by its generic name or fiber trademark but shall be designated as “other fiber,” except that the percentage of wool or recycled wool shall always be stated, in accordance with section 4(a)(2)(A) of the Act. When more than one of such fibers, other than wool or recycled wool, are present in amounts of less than 5 percent, they shall be designated in the aggregate as “other fibers.” Provided, however, that nothing in this section shall prevent the disclosure of any fiber present in the product which has a clearly established and definite functional significance when present in the amount stated, as for example:

(a) A registered identification number assigned by the Federal Trade Commission under and in accordance with the provisions of this section may be used upon the stamp, tag, label, or other mark of identification required under the Act to be affixed to a wool product, as and for the name of the person to whom such number has been assigned.

(b) Any manufacturer of a wool product or person subject to section 3 of the Act with respect to such wool product, residing in the United States, may apply to the Federal Trade Commission for a registered identification number for use by the applicant on the stamp, tag, label, or other mark of identification required under the Act.

(c) Registered identification numbers shall be used only by the person or firm to whom they are issued, and such numbers are not transferable or assignable. Registered identification numbers shall be subject to cancellation whenever any such number was procured or has been used improperly or contrary to the requirements of the Acts administered by the Federal Trade Commission, and regulations in this part, or when otherwise deemed necessary in the public interest. Registered identification numbers shall be subject to cancellation if the Commission fails to receive prompt notification of any change in name, business address, or legal business status of a person or firm to whom a registered identification number has been assigned, by application duly executed in the form and manner set out in paragraph (e) of this section, reflecting the current name, business address, and legal business status of the person or firm.

(d) Registered identification numbers assigned under this section may be used on labels required in labeling products subject to the provisions of the Fur Products Labeling Act and Textile Fiber Products Identification Act, and numbers previously assigned by the Commission under such Acts may be used as and for the required name in labeling under this Act. When so used by the person or firm to whom assigned, the use of the numbers shall be construed as identifying and binding the applicant as fully and in all respects as though assigned under the specific Act for which it is used.

(e) Requests for a registered identification number, to update information pertaining to an existing number, or to cancel an existing number shall be made through the Commission's Web site at https://rn.ftc.gov. Unless otherwise directed by the Commission or its designee, requests made by other means (including but not limited to email) will not be accepted and approved.

(a) A label is required to be affixed to each wool product and, where required, to its package or container in a secure manner. Such label shall be conspicuous and shall be of such durability as to remain attached to the product and its package throughout any distribution, sale, resale and until sold and delivered to the ultimate consumer.

(b) Each wool product with a neck must have a label disclosing the country of origin affixed to the inside center of the neck midway between the shoulder seams or in close proximity to another label affixed to the inside center of the neck. The fiber content and RN or name of the company may be disclosed on the same label as the country of origin or on another conspicuous and readily accessible label or labels on the inside or outside of the garment. On all other wool products, the required information shall be disclosed on a conspicuous and readily accessible label or labels on the inside or outside of the product. The country of origin disclosure must always appear on the front side of the label. Other required information may appear either on the front side or the reverse side of a label, provided that the information is conspicuous and readily accessible.

(c) In the case of hosiery products, this section does not require affixing a label to each hosiery product contained in a package if, (1) such hosiery products are intended for sale to the ultimate consumer in such package, (2) such package has affixed to it a label bearing the required information for the hosiery products contained in the package, and (3) the information on the label affixed to the package is equally applicable to each wool product contained therein.

Stamps, tags, labels, or other marks of identification, which are insecurely attached, or which in the course of offering the product for sale, selling, reselling, transporting, marketing, or handling incident thereto are likely to become detached, indistinct, obliterated, illegible, mutilated, inaccessible, or inconspicuous, shall not be used.

All words, statements and other information required by or under authority of the Act and the rules and regulations thereunder to appear on the stamp, tag, label, or other mark of identification, shall appear in the English language. If the product bears any stamp, tag, label, or mark of identification which contains any of the required information in a language other than English, all of the required information shall appear both in such other language and in the English language.

(a) Except where another name is required or permitted under the Act or regulations, the respective common generic name of the fiber shall be used when naming fibers in the required information; as for example, “wool,” “recycled wool,” “cotton,” “rayon,” “silk,” “linen,” “acetate,” “nylon,” “polyester.”

(b) The generic names of manufactured fibers as heretofore or hereafter established in § 303.7 of this part (Rule 7) of the regulations promulgated under the Textile Fiber Products Identification Act (72 Stat. 1717; 15 U.S.C. 70) shall be used in setting forth the required fiber content information as to wool products.

(c) A non-deceptive fiber trademark may be used on a label in conjunction with the generic name of the fiber to which it relates. Where such a trademark is placed on a label in conjunction with the required information, the generic name of the fiber must appear in immediate conjunction therewith, and such trademark and generic name must appear in type or lettering of equal size and conspicuousness.

(d) Where a generic name or a fiber trademark is used on any label, whether required or non-required, a full fiber content disclosure with percentages shall be made in accordance with the Act and regulations. Where a generic name or a fiber trademark is used on any hang-tag attached to a wool product that has a label providing required information and the hang-tag provides non-required information, such as a hang-tag stating only a generic fiber name or trademark or providing information about a particular fiber's characteristics, the hang-tag need not provide a full fiber content disclosure; however, if the wool product contains any fiber other than the fiber identified by the generic fiber name or trademark, the hang-tag must disclose clearly and conspicuously that it does not provide the product's full fiber content; for example:

“This tag does not disclose the product's full fiber content.” or

“See label for the product's full fiber content.”

(e) If a fiber trademark is not used in the required information, but is used elsewhere on the label as nonrequired information, the generic name of the fiber shall accompany the fiber trademark in legible and conspicuous type or lettering the first time the trademark is used.

(f) No fiber trademark or generic name or word, coined word, symbol or depiction which connotes or implies any fiber trademark or generic name shall be used on any label or elsewhere on the product in such a manner as to be false, deceptive, or misleading as to fiber content, or to indicate directly or indirectly that a wool product is composed wholly or in part of a particular fiber, when such is not the case.

(g) The term fur fiber may be used to describe the hair or fur fiber or mixtures thereof of any animal or animals other than the sheep, lamb, Angora goat, Cashmere goat, camel, alpaca, llama and vicuna. If the name, symbol, or depiction of any animal producing the hair or fur fiber is used on the stamp, tag, label, or other means of identification applied or affixed to the wool product, the percentage by weight of such hair or fur fiber in the total fiber weight of the wool product shall be separately stated in the required fiber content disclosure: Provided, That no such name, symbol or depiction shall be used where such hair or fur fiber is present in the amount of less than five per centum of the total fiber weight. No such name, symbol or depiction shall be used in such a way as to imply in any manner that a wool product contains the fur or hair of an animal when the hair or fur fiber of such animal is not present in the product in the amount of five per centum or more of the total fiber weight. The following are examples of fiber content disclosures under this paragraph:

(a) In disclosing required information, words or terms shall not be designated by ditto marks or appear in footnotes referred to by asterisks or other symbols in required information, and shall not be abbreviated.

(b) Where the generic name of a textile fiber is required to appear in immediate conjunction with a fiber trademark, a disclosure of the generic name by means of a footnote, to which reference is made by use of an asterisk or other symbol placed next to the fiber trademark, shall not be sufficient in itself to constitute compliance with the Act and regulations.

(a) Subject to the provisions of § 300.5(b), the required information may appear on any label or labels attached to the product, including the care label required by 16 CFR part 423, provided all the pertinent requirements of the Act and regulations in this part are met and so long as the combination of required information and non-required information is not misleading. All parts of the required information shall be set forth in such a manner as to be clearly legible, conspicuous, and readily accessible to the prospective purchaser. All parts of the required fiber content information shall appear in type or lettering of equal size and conspicuousness.

(b) Subject to the provisions of § 300.8, any non-required information or representations placed on the product shall not minimize, detract from, or conflict with required information and shall not be false, deceptive, or misleading.

The stamp, tag, label, or other mark of identification required under the act, or the required information contained therein, shall not be minimized, rendered obscure or inconspicuous, or be so placed as likely to be unnoticed or unseen by purchasers and purchaser-consumers when the product is offered or displayed for sale or sold to purchasers or the consuming public, by reason of, among others:

(a) Small or indistinct type.

(b) Failure to use letters and numerals of equal size and conspicuousness in naming all fibers and percentages of such fibers as required by the act.

(c) Insufficient background contrast.

(d) Crowding, intermingling, or obscuring with designs, vignettes, or other written, printed or graphic matter.

(a) Where a wool product consists of two or more parts, units, or items of different fiber content, a separate label containing the required information shall be affixed to each of such parts, units, or items showing the required information as to such part, unit, or item, provided that where such parts, units, or items, are marketed or handled as a single product or ensemble and are sold and delivered to the ultimate consumer as a single product or ensemble, the required information may be set out on a single label in such a manner as to separately show the fiber composition of each part, unit, or item.

(b) Where garments, wearing apparel, or other wool products are marketed or handled in pairs or ensembles of the same fiber content, only one unit of the pair or ensemble need be labeled with the required information when sold and delivered to the ultimate consumer.

(c) Where parts or units of wool products of the types referred to in paragraphs (a) and (b) of this section are sold separately, such parts or units shall be labeled with the information required by the Act and regulations.

(a) The name required by the Act to be used on labels shall be the name under which the manufacturer of the wool product or other person subject to section 3 of the Act with respect to such product is doing business. Trade names, trade marks or other names which do not constitute the name under which such person is doing business shall not be used for required identification purposes.

(b) Registered identification numbers, as provided for in § 300.4 of this part (Rule 4), may be used for identification purposes in lieu of the required name.

When necessary to avoid deception, the name of any person other than the manufacturer of the product appearing on the stamp, tag, label, or other mark of identification affixed to such product shall be accompanied by appropriate words showing that the product was not manufactured by such person; as for example:

When wool products are marketed and delivered in a package which is intended to remain unbroken and intact until after delivery to the ultimate consumer, each wool product in the package, except hosiery, and the package shall be labeled with the required information. If the package is transparent to the extent it allows for a clear reading of the required information on the wool product, the package is not required to be labeled.

(a) Where the wool product contains fiber ornamentation not exceeding 5 percent of the total fiber weight of the product and the stated percentages of fiber content of the product are exclusive of such ornamentation, the stamp, tag, label, or other means of identification shall contain a phrase or statement showing such fact; as for example:

(b) Where the fiber ornamentation exceeds five per centum it shall be included in the statement of required percentages of fiber content.

(c) Where the ornamentation constitutes a distinct section of the product, sectional disclosure may be made in accordance with § 300.23 of this part (Rule 23).

Where the fabric or product to which the stamp, tag, label, or mark of identification applies is composed wholly of one kind of fiber, either the word all or the term 100% may be used with the correct fiber name; as for example “100% Wool,” “All Wool,” “100% Recycled Wool,” “All Recycled Wool.” If any such product is composed wholly of one fiber with the exception of fiber ornamentation not exceeding 5%, such term “all” or “100%” as qualifying the name of the fiber may be used, provided it is immediately followed by the phrase “exclusive of ornamentation,” or by a phrase of like meaning; such as, for example:

(a) In setting forth the required fiber content of a product containing any of the specialty fibers named in Section 2(b) of the Act, the name of the specialty fiber present may be used in lieu of the word “wool,” provided the percentage of each named specialty fiber is given, and provided further that the name of the specialty fiber so used is qualified by the word “recycled” when the fiber referred to is “recycled wool” as defined in the Act. The following are examples of fiber content designation permitted under this rule:

(b) Where an election is made to use the name of a specialty fiber in lieu of the word “wool” in describing such specialty fiber, such name shall be used at any time reference is made to the specialty fiber either in required or nonrequired information. The name of the specialty fiber or any word, coined word, symbol or depiction connoting or implying the presence of such specialty fiber shall not be used in nonrequired information on the required label or on any secondary or auxiliary label attached to the wool product if the name of such specialty fiber does not appear in the required fiber content disclosure.

(a)(1) In setting forth the required fiber content of a wool product, the term “cashmere” may be used for such fiber content only if:

(i) Such fiber consists of the fine (dehaired) undercoat fibers produced by a cashmere goat (capra hircus laniger);

(ii) The average diameter of such cashmere fiber does not exceed 19 microns; and

(iii) The cashmere fibers in such wool product contain no more than 3 percent (by weight) of cashmere fibers with average diameters that exceed 30 microns.

(2) The average fiber diameter may be subject to a coefficient of variation around the mean that shall not exceed 24 percent.

(b) In setting forth the required fiber content of a product containing hair of the Angora goat known as mohair or containing cashmere (as defined in paragraph (a) of this section), the term “mohair” or “cashmere,” respectively, may be used for such fiber in lieu of the word “wool,” provided the respective percentage of each such fiber designated as “mohair” or “cashmere” is given, and provided further that such term “mohair” or “cashmere” where used is qualified by the word “recycled” when the fiber referred to is “recycled wool” as defined in the Act. The following are examples of fiber content designations permitted under this section:

(c) Where an election is made to use the term “mohair” or “cashmere” in lieu of the term “wool” as permitted by this section, the appropriate designation of “mohair” or “cashmere” shall be used at any time reference is made to such fiber in either required or nonrequired information. The term “mohair” or “cashmere” or any words, coined words, symbols or depictions connoting or implying the presence of such fibers shall not be used in non-required information on the required label or on any secondary or auxiliary label attached to the wool product if the term “mohair” or “cashmere,” as the case may be, does not appear in the required fiber content disclosure.

The terms “virgin” or “new” as descriptive of a wool product, or any fiber or part thereof, shall not be used when the product, fiber or part so described is not composed wholly of new or virgin fiber which has never been reclaimed from any spun, woven, knitted, felted, braided, bonded, or otherwise manufactured or used product.

A wool product stamped, tagged, labeled, or otherwise identified in the manner described below is mislabeled:

(a) “Super 80's” or “80's,” if the average diameter of wool fiber of such wool product does not average 19.75 microns or finer;

(b) “Super 90's” or “90's,” if the average diameter of wool fiber of such wool product does not average 19.25 microns or finer;

(c) “Super 100's” or “100's,” if the average diameter of wool fiber of such wool product does not average 18.75 microns or finer;

(d) “Super 110's” or “110's,” if the average diameter of wool fiber of such wool product does not average 18.25 microns or finer;

(e) “Super 120's” or “120's,” if the average diameter of wool fiber of such wool product does not average 17.75 microns or finer;

(f) “Super 130's” or “130's,” if the average diameter of wool fiber of such wool product does not average 17.25 microns or finer;

(g) “Super 140's” or “140's,” if the average diameter of wool fiber of such wool product does not average 16.75 microns or finer;

(h) “Super 150's” or “150's,” if the average diameter of wool fiber of such wool product does not average 16.25 microns or finer;

(i) “Super 160's” or “160's,” if the average diameter of wool fiber of such wool product does not average 15.75 microns or finer;

(j) “Super 170's” or “170's,” if the average diameter of wool fiber of such wool product does not average 15.25 microns or finer;

(k) “Super 180's” or “180's,” if the average diameter of wool fiber of such wool product does not average 14.75 microns or finer;

(l) “Super 190's” or “190's,” if the average diameter of wool fiber of such wool product does not average 14.25 microns or finer;

(m) “Super 200's” or “200's,” if the average diameter of wool fiber of such wool product does not average 13.75 microns or finer;

(n) “Super 210's” or “210's,” if the average diameter of wool fiber of such wool product does not average 13.25 microns or finer;

(o) “Super 220's” or “220's,” if the average diameter of wool fiber of such wool product does not average 12.75 microns or finer;

(p) “Super 230's” or “230's,” if the average diameter of wool fiber of such wool product does not average 12.25 microns or finer;

(q) “Super 240's” or “240's,” if the average diameter of wool fiber of such wool product does not average 11.75 microns or finer; and

(r) “Super 250's” or “250's,” if the average diameter of wool fiber of such wool product does not average 11.25 microns or finer.

Where samples, swatches or specimens of wool products subject to the act were used to promote or effect sales of such wool products in commerce, said samples, swatches and specimens, as well as the products themselves, shall be labeled or marked to show their respective fiber contents and other information required by law.

(a) Permissive. Where a wool product is composed of two or more sections which are of different fiber composition, the required information as to fiber content may be separated on the same label in such manner as to show the fiber composition of each section.

(b) Mandatory. The disclosure as above provided shall be made in all instances where such form of marking is necessary to avoid deception.

(a) In labeling or marking garments or articles of apparel which are wool products, the fiber content of any linings, paddings, stiffening, trimmings or facings of such garments or articles of apparel shall be given and shall be set forth separately and distinctly in the stamp, tag, label, or other mark of identification of the products.

(1) If such linings, trimmings or facings contain, purport to contain or are represented as containing wool, or recycled wool; or

(2) If such linings are metallically coated, or coated or laminated with any substance for warmth, or if such linings are composed of pile fabrics, or any fabrics incorporated for warmth or represented directly or by implication as being incorporated for warmth, which articles the Commission finds constitute a class of articles which is customarily accompanied by express or implied representations of fiber content; or

(3) If any express or implied representations of fiber content of any of such linings, paddings, stiffening, trimmings or facings are customarily made.

(b) In the case of garments which contain interlinings, the fiber content of such interlinings shall be set forth separately and distinctly as part of the required information on the stamp, tag, label, or other mark of identification of such garment. For purposes of this paragraph (b) the term interlining means any fabric or fibers incorporated into a garment or article of wearing apparel as a layer between an outershell and an inner lining.

(c) In the case of wool products which are not garments or articles of apparel, but which contain linings, paddings, stiffening, trimmings, or facings, the stamp, tag, label, or other mark of identification of the product shall show the fiber content of such linings, paddings, stiffening, trimmings or facings, set forth separately and distinctly in such stamp, tag, label, or other mark of identification.

(d) Wool products which are or have been manufactured for sale or sold for use as linings, interlinings, paddings, stiffening, trimmings or facings, but not contained in a garment, article of apparel, or other product, shall be labeled or marked with the required information as in the case of other wool products.

(a) Words, coined words, symbols, or depictions which constitute or imply the name or designation of a fiber which is not present in the product shall not appear on labels. Any word or coined word which is phonetically similar to the name or designation of a fiber or which is only a slight variation in spelling from the name or designation of a fiber shall not be used in such a manner as to represent or imply that such fiber is present in the product when the fiber is not present as represented.

(b) Where a word, coined word, symbol, or depiction which connotes or implies the presence of a fiber is used on any label, whether required or non-required, a full fiber content disclosure with percentages shall be made on such label in accordance with the Act and regulations. Where a word, coined word, symbol, or depiction which connotes or implies the presence of a fiber is used on any hang-tag attached to a wool product that has a label providing required information and the hang-tag provides non-required information, such as a hang-tag providing information about a particular fiber's characteristics, the hang-tag need not provide a full fiber content disclosure; however, if the wool product contains any fiber other than the fiber identified on the hang-tag, the hang-tag must disclose clearly and conspicuously that it does not provide the product's full fiber content; for example:

“This tag does not disclose the product's full fiber content.” or

“See label for the product's full fiber content.”

(a) In addition to the other information required by the Act and Regulations:

(1) Each imported wool product shall be labeled with the name of the country where such imported product was processed or manufactured;

(2) Each wool product completely made in the United States of materials that were made in the United States shall be labeled using the term Made in U.S.A. or some other clear and equivalent term.

(3) Each wool product made in the United States, either in whole or in part of imported materials, shall contain a label disclosing these facts; for example:

(4) Each wool product partially manufactured in a foreign country and partially manufactured in the United States shall contain on a label the following information:

(i) The manufacturing process in the foreign country and in the USA; for example:

(ii) When the U.S. Customs Service requires an origin label on the unfinished product, the manufacturing processes as required in paragraph (a)(4)(i) of this section or the name of the foreign country required by Customs, for example:

(b) For the purpose of determining whether a product should be marked under paragraphs (a) (2), (3), or (4) of this section, a manufacturer needs to consider the origin of only those materials that are covered under the Act and that are one step removed from that manufacturing process. For example, a yarn manufacturer must identify fiber if it is imported, a cloth manufacturer must identify imported yarn and a household product manufacturer must identify imported cloth or imported yarn for household products made directly from yarn, or imported fiber used as filling for warmth.

(c) The term country means the political entity known as a nation. Except for the United States, colonies, possessions or protectorates outside the boundaries of the mother country shall be considered separate countries, and the name thereof shall be deemed acceptable in designating the country where the wool product was processed or manufactured unless the Commission shall otherwise direct.

(d) The country of origin of an imported wool product as determined under the laws and regulations enforced by United States Customs and Border Protection shall be considered to be the country where such wool product was processed or manufactured.

(e) The English name of the country where the imported wool product was processed or manufactured shall be used. The adjectival form of the name of the country will be accepted as the name of the country where the wool product was processed or manufactured, provided the adjectival form of the name does not appear with such other words so as to refer to a kind of species of product. Variant spellings which clearly indicate the English name of the country, such as Brasil for Brazil and Italie for Italy, are acceptable. Abbreviations which unmistakenly indicate the name of a country, such as Gt. Britain for Great Britain, are acceptable.

(f) Nothing in this rule shall be construed as limiting in any way the information required to be disclosed on labels under the provisions of any Tariff Act of the United States or regulations promulgated thereunder.

When a wool product is advertised in any mail order catalog or mail order promotional material, the description of such product shall contain a clear and conspicuous statement that the product was either made in U.S.A., imported, or both. Other words or phrases with the same meaning may be used. The statement of origin required by this section shall not be inconsistent with the origin labeling of the product being advertised.

The fiber content of pile fabrics or products made thereof may be stated in the label or mark of identification in such segregated form as will show the fiber content of the face or pile and of the back or base, with the percentages of the respective fibers as they exist in the face or pile and in the back or base: Provided, That in such disclosure the respective percentages of the face and the back be given in such manner as will show the ratio between the face and the back. Examples of the form of marking pile fabrics as to fiber content provided for in this section are as follows:

Where a wool product is made wholly of one fiber or a blend of fibers with the exception of an additional fiber in minor proportion superimposed or added in certain separate and distinct areas or sections for reinforcing or other useful purposes, the product may be designated according to the fiber content of the principal fiber or blend of fibers, with an excepting naming the superimposed or added fiber, giving the percentage thereof in relation to the total fiber weight of the principal fiber or blend of fibers, and indicating the area or section which contains the superimposed or added fiber. An example of this type of fiber content disclosure, as applied to products having reinforcing fibers added to a particular area or section, is as follows:

(a) Where a wool product is composed in part of various man-made fibers recovered from textile products containing underdetermined qualities of such fibers, the percentage content of the respective fibers recovered from such products may be disclosed on the required stamp, tag, or label, in aggregate form as “man-made fibers” followed by the naming of such fibers in the order of their predominance by weight, as for example:

(b) Where a wool product is composed in part of wool, or recycled wool and in part of unknown and, for practical purposes, undeterminable non-woolen fibers reclaimed from any spun, woven, knitted, felted, braided, bonded or otherwise manufactured or used product, the required fiber content disclosure may, when truthfully applicable, in lieu of the fiber content disclosure otherwise required by the Act and regulations, set forth (1) the percentages of wool or recycled wool, and (2) the generic names and the percentages of all other fibers whose presence is known or practically ascertainable and (3) the percentage of the unknown and undeterminable reclaimed fibers, designating such reclaimed fibers as “unknown reclaimed fibers” or “undetermined reclaimed fibers,” as for example:

(c) The terms unknown recycled fibers and undetermined recycled fibers may be used in describing the unknown and undeterminable reclaimed fibers referred to in paragraph (b) of this rule in lieu of the terms specified therein, provided, however, That the same standard is used in determining the applicability of the term recycled as is used in defining “recycled wool” in section 2(c) of the Act.

(d) For purposes of this rule undetermined or unascertained amounts of wool or recycled wool may be classified and designated as recycled wool.

(e) Nothing contained in this rule shall excuse a full and accurate disclosure of fiber content with correct percentages if the same is known or practically ascertainable, or permit a deviation from the requirements of section 4(a)(2)(A) of the Act with respect to products not labeled under the provisions of this rule or permit a higher classification of wool or recycled wool than that provided by Section 2 of the Act.

(a) For wool products which consist of, or are made from, miscellaneous cloth scraps comprising manufacturing by-products and containing various fibers of undetermined percentages, the following form of disclosure as to fiber content of such wool products, where truthfully appliable and with appropriate percentage figure inserted, may be used in the stamp, tag, label, or mark of identification of such product:

(1) Where the product contains chiefly cotton as well as woolen fibers in the minimum percentage designated for recycled wool:

(2) Where the product contains chiefly rayon as well as woolen fibers in the minimum percentage designated for recycled wool:

(3) Where the product is composed chiefly of a mixture of cotton and rayon as well as woolen fibers in the minimum percentage designated for recycled wool:

(4) Where the product contains chiefly woolen fibers with the balance of undetermined mixtures of cotton, rayon or other non-woolen fibers:

(b) Where the cotton or rayon content or the non-woolen fiber content mentioned in such forms of disclosure is not known to comprise as much as 50% of the fiber content of the product, the word “chiefly” in the respective form of disclosure specified in this section shall be omitted.

(c) The words “Contents are” may be used in the above-mentioned forms of marking in lieu of the words “Made of” where appropriate to the nature of the product.

(d) For purposes of this rule, undetermined or unascertained amounts of wool or recycled wool which may be contained in the product may be classified and designated as recycled wool.

Products subject to the act shall not bear, nor have used in connection therewith, any stamp, tag, label, mark or representation which is false, misleading or deceptive in any respect.

(a) Pursuant to the provisions of section 6 of the Act, every manufacturer of a wool product subject to the Act, irrespective of whether any guaranty has been given or received, shall maintain records showing the information required by the Act and Regulations with respect to all such wool products made by such manufacturer. Such records shall show:

(1) The fiber content of the product specified in section 4(a)(2)(A) of the Act.

(2) The maximum percentage of the total weight of the wool product of any non-fibrous loading, filling or adulterating matter as prescribed by section 4(a)(2)(B) of the Act.

(3) The name, or registered identification number issued by the Commission, of the manufacturer of the wool product or the name or registered identification number of one or more persons subject to section 3 of the Act with respect to such wool product.

(4) The name of the country where the wool product was processed or manufactured as prescribed by sections 300.25a and/or .25b.

(b) Any person substituting labels shall keep such records as will show the information on the label removed and the name or names of the person or persons from whom the wool product was received.

(c) The purpose of these records is to permit a determination that the requirements of the Act and Regulations have been met and to establish a traceable line of continuity from raw material through processing to finished product. The records shall be preserved for at least three years.

(a) The following are suggested forms of separate guaranties under section 9 of the Act which may be used by a guarantor residing in the United States on or as part of an invoice or other document relating to the marketing or handling of any wool products listed and designated therein and showing the date of such invoice or other document and the signature and address of the guarantor:

(1) General form.

(2) Guaranty based on guaranty.

(b) The mere disclosure of required information including the fiber content of wool products on a label or on an invoice or other document relating to its marketing or handling shall not be considered a form of separate guaranty.

(a)(1) Under section 9 of the Act any person residing in the United States and marketing or handling wool products may file a continuing guaranty with the Federal Trade Commission.

(2) When filed with the Commission a continuing guaranty shall be fully executed in duplicate. Forms for use in preparing continuing guaranties will be supplied by the Commission upon request.

(3) Continuing guaranties filed with the Commission shall continue in effect until revoked. The guarantor shall promptly report any change in business status to the Commission.

(b) The prescribed form for a continuing guaranty is found in § 303.38(b) of this chapter. The form is available upon request from the Textile Section, Enforcement Division, Federal Trade Commission, 600 Pennsylvania Avenue, NW, Washington, DC 20580.

(c) Any person who has a continuing guaranty on file with the Commission may, during the effective dates of the guaranty, give notice of such fact by setting forth on the invoice or other document covering the marketing or handling of the product guaranteed the following:

(d) Any person who falsely represents that he has a continuing guaranty on file with the Federal Trade Commission shall be deemed to have furnished a false guaranty under section 9(b) of the Act.

No representation or suggestion that a wool product is guaranteed under the act by the Government, or any branch thereof shall be made on or in the stamp, tag, label, or other mark of identification, applied or affixed to wool products.

Hearings under section 4(d) of the act will be held when deemed by the Commission to be in the public interest. Interested persons may file applications for such hearings. Such applications shall be filed in quadruplicate and shall contain a detailed technical description of the class or classes of articles or products regarding which applicant requests a determination and announcement by the Commission concerning express or implied representations of fiber content of articles or concerning insignificant or inconsequential textile content of products.