Collapse to view only § 640.23 - Testing the blood.
- § 640.20 - Platelets.
- § 640.21 - Eligibility of donors.
- § 640.22 - Collection of source material.
- § 640.23 - Testing the blood.
- § 640.24 - Processing.
- § 640.25 - General requirements.
§ 640.20 - Platelets.
(a) Proper name and definition. The proper name of this product shall be Platelets. The product is defined as platelets collected from one unit of blood and resuspended in an appropriate volume of original plasma, as prescribed in § 640.24(d).
(b) Source. The source material for Platelets is plasma which may be obtained by whole blood collection or by plateletpheresis.
§ 640.21 - Eligibility of donors.
(a) Establishments must determine the eligibility of donors of platelets derived from Whole Blood and donors of platelets collected by plateletpheresis in accordance with §§ 630.10 and 630.15 of this chapter, except as provided in this section.
(b) A plateletpheresis donor must not serve as the source of platelets for transfusion if the donor has recently ingested a drug that adversely affects platelet function.
(c) A Whole Blood donor must not serve as the source of platelets for transfusion if the donor has recently ingested a drug that adversely affects platelet function unless the unit is labeled to identify the ingested drug that adversely affects platelet function.
(d) If you are collecting platelets by plateletpheresis, you must assess and monitor the donor's platelet count.
(1) You must take adequate and appropriate steps to assure that the donor's platelet count is at least 150,000 platelets per microliter (/µL) before plateletpheresis begins. Exception: If you do not have records of a donor's platelet count from prior donations and you are not able to assess the donor's platelet count either prior to or immediately following the initiation of the collection procedure, you may collect platelets by plateletpheresis, but you must not collect 9.0 × 10 11 or more platelets from that donor.
(2) You must defer from platelet donation a donor whose pre-donation platelet count is less than 150,000 platelets/µL until a subsequent pre-donation platelet count indicates that the donor's platelet count is at least 150,000 platelets/µL; and
(3) You must take appropriate steps to assure that the donor's intended post-donation platelet count will be no less than 100,000 platelets/µL.
(e) Frequency of plateletpheresis collection. (1) The donor may donate no more than a total of 24 plateletpheresis collections during a 12-month rolling period.
(2) When you collect fewer than 6 × 10 11 platelets, you must wait at least 2 calendar days before any subsequent plateletpheresis collection. You must not attempt to collect more than 2 collections within a 7 calendar day period.
(3) When you collect 6 × 10 11 or more platelets, you must wait at least 7 calendar days before any subsequent plateletpheresis collection.
(4) Exception. For a period not to exceed 30 calendar days, a donor may serve as a dedicated plateletpheresis donor for a single recipient, in accordance with § 610.40(c)(1) of this chapter, as often as is medically necessary, provided that the donor is in good health, as determined and documented by the responsible physician, and the donor's platelet count is at least 150,000 platelets/µL, measured at the conclusion of the previous donation or before initiating plateletpheresis for the current donation.
(f) Deferral of plateletpheresis donors due to red blood cell loss. (1) You must defer a donor from donating platelets by plateletpheresis or a co-collection of platelets and plasma by apheresis for 8 weeks if the donor has donated a unit of Whole Blood, or a single unit of Red Blood Cells by apheresis unless at least 2 calendar days have passed and the extracorporeal volume of the apheresis device is less than 100 milliliters.
(2) You must defer a donor from donating platelets for a period of 16 weeks if the donor donates two units of Red Blood Cells during a single apheresis procedure.
(3) You must defer a donor for 8 weeks or more if the cumulative red blood cell loss in any 8 week period could adversely affect donor health.
(g) The responsible physician must obtain the informed consent of a plateletpheresis donor on the first day of donation, and at subsequent intervals no longer than 1 year.
(1) The responsible physician must explain the risks and hazards of the procedure to the donor; and
(2) The explanation must be made in such a manner that the donor may give consent, and has a clear opportunity to refuse the procedure.
§ 640.22 - Collection of source material.
(a) Whole blood used as the source of Platelets shall be collected as prescribed in § 640.4.
(b) [Reserved]
(c) If plateletpheresis is used, the procedure for collection must be as prescribed in §§ 640.21, 640.64 (except paragraph (c)), and 640.65, or as described in an approved biologics license application (BLA) or an approved supplement to a BLA.
(d) The phlebotomy shall be performed by a single uninterrupted venipuncture with minimal damage to, and minimal manipulation of, the donor's tissue.
§ 640.23 - Testing the blood.
(a) Blood from which plasma is separated for the preparation of Platelets shall be tested as prescribed in § 610.40 of this chapter and § 640.5 (b) and (c).
(b) The tests shall be performed on a sample of blood collected at the time of collecting the source blood, and such sample container shall be labeled with the donor's number before the container is filled.
§ 640.24 - Processing.
(a) Separation of plasma and platelets and resuspension of the platelets must be in a closed system. Platelets must not be pooled during processing unless the platelets are pooled as specified in the directions for use for the blood collecting, processing, and storage system approved for such use by the Director, Center for Biologics Evaluation and Research.
(b) Immediately after collection, the whole blood or plasma shall be held in storage between 20 and 24 °C unless it must be transported from the collection center to the processing laboratory. During such transport, all reasonable methods shall be used to maintain the temperature as close as possible to a range between 20 and 24 °C until it arrives at the processing laboratory where it shall be held between 20 and 24 °C until the platelets are separated. The platelet concentrate shall be separated within 4 hours or within the timeframe specified in the directions for use for the blood collecting, processing, and storage system.
(c) The time and speed of centrifugation must have been demonstrated to produce an unclumped product, without visible hemolysis, that yields a count of not less than 5.5 × 10 10 platelets per unit in at least 75 percent of the units tested.
(d) The volume of original plasma used for resuspension of the platelets shall be determined by the maintenance of a pH of not less than 6.2 during the storage period. The pH shall be measured on a sample of platelets which has been stored for the maximum dating period at the selected storage temperature. One of the following storage temperatures shall be used continuously:
(1) 20 to 24 °C.
(2) 1 to 6 °C.
(e) Final containers used for Platelets shall be colorless and transparent to permit visual inspection of the contents; any closure shall maintain a hermetic seal and prevent contamination of the contents. The container material shall not interact with the contents, under the customary conditions of storage and use, in such a manner as to have an adverse effect upon the safety, purity, potency, or efficacy of the product. At the time of filling, the final container shall be marked or identified by number so as to relate it to the donor.
§ 640.25 - General requirements.
(a) Storage. Immediately after resuspension, Platelets shall be placed in storage at the selected temperature range. If stored at 20 to 24 °C, a continuous gentle agitation of the platelet concentrate shall be maintained throughout the storage period. Agitation is optional if stored at a temperature between 1 and 6 °C.
(b) Quality control testing. Each month four units prepared from different donors shall be tested at the end of the storage period as follows:
(1) Platelet count.
(2) pH of not less than 6.2 measured at the storage temperature of the unit.
(3) Measurement of actual plasma volume.
(4) If the results of the quality control testing indicate that the product does not meet the prescribed requirements, immediate corrective action shall be taken and a record maintained of such action.
(c) Manufacturing responsibility. All manufacturing of Platelets shall be performed at the same licensed establishment, except that the quality control testing under paragraph (b) of this section may be performed by a clinical laboratory which meets the standards of the Clinical Laboratories Improvement Amendments of 1988 (CLIA) (42 U.S.C. 263a) and is qualified to perform platelet counts. Such arrangements must be approved by the Director, Center for Biologics Evaluation and Research, Food and Drug Administration. Such testing shall not be considered as divided manufacturing, as described in § 610.63 of this chapter, provided the following conditions are met:
(1) The results of each test are received within 10 days of the preparation of the platelet concentrate, and are maintained by the establishment licensed for Platelets so that they may be reviewed by an authorized representative of the Food and Drug Administration.
(2) The licensed Platelets manufacturer has obtained a written agreement that the testing laboratory will permit an authorized representative of the Food and Drug Administration to inspect its testing procedures and facilities during reasonable business hours.
(3) The testing laboratory will participate in any proficiency testing programs undertaken by the Center for Biologics Evaluation and Research, Food and Drug Administration.