- § 415.640 - Applicability; description of the cadmium pigments and salts production subcategory.
- § 415.641 - Specialized definitions.
- § 415.642 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).
- § 415.643 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).
- § 415.644 - Pretreatment standards for existing sources (PSES).
- § 415.645 - New source performance standards (NSPS).
- § 415.646 - Pretreatment standards for new sources (PSNS).
- § 415.647 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT).
§ 415.640 - Applicability; description of the cadmium pigments and salts production subcategory.
The provisions of this subpart are applicable to discharges and to the introduction of pollutants into treatment works which are publicly owned resulting from the production of cadmium pigments and salts including cadmium chloride, cadmium nitrate, and cadmium sulfate salts.
§ 415.641 - Specialized definitions.
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations, and methods of analysis set forth in part 401 of this chapter shall apply to this subpart.
(b) The term product shall mean cadmium pigment or cadmium salt.
(c) The term cadmium shall mean the total cadmium present in the process wastewater stream exiting the wastewater treatment system.
(d) The term selenium shall mean the total selenium present in the process wastewater stream exiting the wastewater treatment system.
(e) The term zinc shall mean the total zinc present in the process wastewater stream exiting the wastewater treatment system.
§ 415.642 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).
(a) Except as provided in 40 CFR 125.30 through 125.32 any existing point source subject to this subpart and producing cadmium pigments must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).
Subpart BL—Cadmium Pigments
Pollutant or pollutant property | BPT effluent limitations | Maximum for any 1 day | Average of daily values for 30 consecutive days | Kg/kkg (or pounds per/1,000 lb) of product | TSS | 2.59 | 1.57 | Cadmium (T) | 0.078 | 0.026 | Selenium (T) | 0.11 | 0.037 | Zinc (T) | 0.017 | 0.0092 | pH | ( 1) | ( 1) |
---|
1 Within the range 6.0 to 9.0.
(b) Except as provided in 40 CFR 125.30 through 125.32 any existing point source subject to this subpart and producing cadmium salts must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
Subpart BL—Cadmium Salts
Pollutant or pollutant property | BPT effluent limitations | Maximum for any 1 day | Average of daily values for 30 consecutive days | Kg/kkg (or pounds per/1,000 lb) of product | TSS | 0.0016 | 0.001 | Cadmium (T) | 4.87 × 10 | 1.62 × 10 | Selenium (T) | 7.0 × 10 | 2.3 × 10 | Zinc (T) | 1.04 × 10 | 5.8 × 10 | pH | ( 1) | ( 1) |
---|
1 Within the range 6.0 to 9.0.
§ 415.643 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).
(a) Except as provided in 40 CFR 125.30 through 125.32 any existing point source subject to this subpart and producing cadmium pigments must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): The limitations for Cadmium (T), Selenium (T), and Zinc (T) are the same as specified in § 415.642(a).
(b) Except as provided in 40 CFR 125.30 through 125.32 any existing point source subject to this subpart and producing cadmium salts must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT): The limitations for cadmium (T), selenium (T), and zinc (T) are the same as specified in § 414.642(b).
§ 415.644 - Pretreatment standards for existing sources (PSES).
(a) Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart and producing cadmium pigments which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources (PSES):
Subpart BL—Cadmium Pigments
Pollutant or pollutant property | PSES effluent limitations | Maximum for any 1 day | Average of daily values for 30 consecutive days | Milligrams per liter (mg/l) | Cadmium (T) | 0.84 | 0.28 | Selenium (T) | 1.1 | 0.40 | Zinc (T) | 0.18 | 0.10 |
---|
(b) Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart and producing cadmium salts which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources (PSES):
Subpart BL—Cadmium Salts
Pollutant or pollutant property | PSES effluent limitations | Maximum for any 1 day | Average of daily values for 30 consecutive days | Milligrams per liter (mg/l) | Cadmium (T) | 0.84 | 0.28 | Selenium (T) | 1.1 | 0.40 | Zinc (T) | 0.18 | 0.10 |
---|
§ 415.645 - New source performance standards (NSPS).
(a) Any new source subject to this subpart and producing cadmium pigments must achieve the following new source performance standards (NSPS): The limitations for pH, TSS, cadmium (T), selenium (T), and zinc (T), are the same as specified in § 415.642(a).
(b) Any new source subject to this subpart and producing cadmium salts must achieve the following new source performance standards (NSPS): The limitations for pH, TSS, cadmium (T), selenium (T), and zinc (T), are the same as specified in § 415.642(b).
§ 415.646 - Pretreatment standards for new sources (PSNS).
(a) Except as provided in 40 CFR 403.7, any new source subject to this subpart and producing cadmium pigments which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources (PSNS): The limitations for cadmium (T), selenium (T), and zinc (T), are the same as specified in § 415.644(a).
(b) Except as provided in 40 CFR 403.7, any new source subject to this subpart and producing cadmium salts which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources (PSNS): The limitations for cadmium (T), selenium (T), and zinc (T) are the same as specified in § 415.644(b).
§ 415.647 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT).
(a) Except as provided in 40 CFR 125.30 through 125.32 any existing point source subject to this subpart and producing cadmium pigments must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The limitations are the same for TSS and pH as specified in § 415.642(a).
(b) Except as provided in 40 CFR 125.30 through 125.32 any existing point source subject to this subpart and producing cadmium salts must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The limitations are the same for TSS and pH as specified in § 415.642(b).