Collapse to view only § 415.671 - Specialized definitions.
- § 415.670 - Applicability; description of the zinc chloride production subcategory.
- § 415.671 - Specialized definitions.
- § 415.672 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).
- § 415.673 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).
- § 415.674 - Pretreatment standards for existing sources (PSES).
- § 415.675 - New source performance standards (NSPS).
- § 415.676 - Pretreatment standards for new sources (PSNS).
- § 415.677 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT).
§ 415.670 - Applicability; description of the zinc chloride production subcategory.
The provisions of this subpart are applicable to discharges and to the introduction of pollutants into treatment works which are publicly owned resulting from the production of zinc chloride.
§ 415.671 - Specialized definitions.
For the purpose of this subpart:
(a) Except as provided below, the general definitions, abbreviations, and methods of analysis set forth in part 401 of this chapter shall apply to this subpart.
(b) The term product shall mean zinc chloride.
(c) The term arsenic shall mean the total arsenic present in the process wastewater stream exiting the wastewater treatment system.
(d) The term zinc shall mean the total zinc present in the process wastewater stream exiting the wastewater treatment system.
(e) The term lead shall mean the total lead present in the process wastewater stream exiting the wastewater treatment system.
§ 415.672 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).
(a) Except as provided in 40 CFR 125.30 through 125.32 any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).
Subpart BO—Zinc Chloride
Pollutant or pollutant property | BPT effluent limitations | Maximum for any 1 day | Average of daily values for 30 consecutive days | Milligrams per liter (mg/l) | TSS | 43 | 25 | Arsenic (T) | 3.0 | 1.0 | Zinc (T) | 11.4 | 3.8 | Lead (T) | 1.8 | 0.6 | pH | ( 1) | ( 1) |
---|
1 Within the range 6.0 to 10.0
§ 415.673 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).
Except as provided in 40 CFR 125.30 through 125.32 any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).
Subpart BO—Zinc Chloride
Pollutant or pollutant property | BAT effluent limitations | Maximum for any 1 day | Average of daily values for 30 consecutive days | Milligrams per liter (mg/l) | Arsenic (T) | 3.0 | 1.0 | Zinc (T) | 2.3 | 0.76 | Lead (T) | 0.18 | 0.048 |
---|
§ 415.674 - Pretreatment standards for existing sources (PSES).
Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources (PSES):
Subpart BO—Zinc Chloride
Pollutant or pollutant property | PSES effluent limitations | Maximum for any 1 day | Average of daily values for 30 consecutive days | Milligrams per liter (mg/l) | Arsenic (T) | 3.0 | 1.0 | Zinc (T) | 2.3 | 0.76 | Lead (T) | 0.18 | 0.048 |
---|
§ 415.675 - New source performance standards (NSPS).
Any new source subject to this subpart must achieve the following new source performance standards (NSPS):
Subpart BO—Zinc Chloride
Pollutant or pollutant property | NSPS effluent limitations | Maximum for any 1 day | Average of daily values for 30 consecutive days | Milligrams per liter (mg/l) | TSS | 28 | 17 | Arsenic (T) | 3.0 | 1.0. | Zinc (T) | 2.3 | 0.76 | Lead (T) | 0.18 | 0.048 | pH | ( 1) | ( 1) |
---|
1 Within the range 6.0 to 10.0.
§ 415.676 - Pretreatment standards for new sources (PSNS).
Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources (PSNS): The limitations for arsenic (T), zinc (T), and lead (T) are the same as specified in § 415.674.
§ 415.677 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT).
Except as provided in 40 CFR 125.30 through 125.32 any existing point source subject to this subpart must acheive the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT): The limitations are the same for TSS and pH as specified in § 415.672.