Collapse to view only § 437.44 - Effluent limitations attainable by the application of the best available technology economically achievable (BAT).

§ 437.40 - Applicability.

(a) Except as provided in § 437.1(b), (c), or (d) or in paragraph (b) of this section, facilities that treat wastes subject to more than one of the previous subparts must comply with either provisions of this subpart or the applicable provisions of subpart A, B, or C. The provisions of this subpart are applicable to that portion of wastewater discharges from a centralized waste treatment facility that results from mixing any combination of treated or untreated waste otherwise subject to subpart A, subpart B, or subpart C of this part only if a facility requests the permit writer or control authority to develop subpart D limitations (or standards) and establishes that it provides equivalent treatment as defined in § 437.2(h).

(b) In order to ensure appropriate treatment rather than dilution of dissimilar wastes, an NPDES permit writer or control authority may require a new or existing facility subject to paragraph (a) of this section to achieve alternative effluent limitations or standards as defined in § 437.2 (b) in the following circumstances:

(1) The facility receives, on a continuing basis, flows of process wastewater from five or fewer facilities subject to 40 CFR subchapter N limitations and standards; and

(2) The process wastewater flows received for treatment at the facility have relatively consistent pollutant profiles.

§ 437.41 - Special definitions.

(a) Initial Certification Statement for this subpart means a written submission to the appropriate permitting authority (either the local control authority (the POTW) or NPDES permit writer) that is signed by the responsible corporate officer as defined in 40 CFR 403.12(l) or 40 CFR 122.22. The statement must:

(1) List and describe the subcategories of wastes accepted for treatment at the facility;

(2) List and describe the treatment systems in-place at the facility and conditions under which the treatment systems are operated for the subcategories of wastes accepted for treatment at the facility;

(3) Include information and supporting data establishing that these treatment systems will achieve equivalent treatment.

(b) Periodic Certification Statement for this subpart means a written submission to the appropriate permitting authority (the local control authority (the POTW) or NPDES permit writer) which certifies that the facility is operating its treatment systems to provide equivalent treatment as set forth in the initial certification. In the event that the facility has modified its treatment systems, the facility should submit a description of the modified systems and information and supporting data to establish that the modified system will achieve equivalent treatment. The periodic certification statement must be signed by the responsible corporate officer as defined in 40 CFR 403.12(l) or 40 CFR 122.22.

(c) On-site Compliance Paperwork for this subpart means data or information retained in the offices of the facility which supports the initial and periodic certification statements. This Paperwork must:

(1) List and describe the subcategory wastes being accepted for treatment at the facility;

(2) List and describe the treatment systems in-place at the facility, modifications to the treatment systems and the conditions under which the systems are operated for the subcategories of wastes accepted for treatment at the facility;

(3) Provide information and supporting data establishing that these treatment systems will achieve equivalent treatment;

(4) Describe the procedures it follows to ensure that its treatment systems are well-operated and maintained; and

(5) Explain why the procedures it has adopted will ensure its treatment systems are well-operated and maintained.

§ 437.42 - Effluent limitations attainable by the application of the best practicable control technology currently available (BPT).

(a) Except as provided in 40 CFR 125.30 through 125.32 or § 437.40(b), any existing facility subject to this subpart which combines treated or untreated wastes from subparts A, B, or C of this part may be subject to Multiple Wastestream Subcategory effluent limitations representing the application of BPT set forth in paragraphs (b), (c), (d), or (e) of this section if the discharger agrees to the following conditions in its NPDES permit:

(1) The discharger will meet the applicable Multiple Wastestream Subcategory limitations set forth in (b), (c), (d) or (e);

(2) The discharger will notify its NPDES permit writer at the time of renewal or modification of its permit, of its desire to be subject to the Multiple Waste Subcategory by submitting to the NPDES permit writer an initial certification statement as described in § 437.41(a);

(3) The discharger will submit to its NPDES permitting authority a periodic certification statement as described in § 437.41(b) once a year; and

(4) The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in § 437.41(c).

(b) Combined waste receipts from subparts A, B, and C of this part. (1) As provided in § 437.42(a), any existing point source subject to this paragraph must achieve the following effluent limitations representing the application of BPT:

BPT Limitations

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Conventional ParametersBOD516353.0 O&G12738.0 pH( 2)( 2) TSS74.130.6 Metal ParametersAntimony0.2490.206 Arsenic0.1620.104 Cadmium0.01720.0102 Chromium0.7460.323 Cobalt0.1920.124 Copper0.5000.242 Lead0.3500.160 Mercury0.002340.000739 Nickel3.951.45 Silver0.1200.0351 Tin0.4090.120 Titanium0.09470.0618 Vanadium0.2180.0662 Zinc0.4970.420 Organic ParametersAcetone30.27.97 Acetophenone0.1140.0562 Bis(2-ethylhexyl) phthalate0.2150.101 2-Butanone4.811.85 Butylbenzyl phthalate0.1880.0887 Carbazole0.5980.276 o-Cresol1.920.561 p-Cresol0.6980.205 n-Decane0.9480.437 Fluoranthene0.05370.0268 n-Octadecane0.5890.302 Phenol3.651.08 Pyridine0.3700.182 2,4,6-Trichlorophenol0.1550.106

1 mg/L (ppm).

2 OSC Within the range 6 to 9.

(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:

In-Plant Limitations

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Cyanide500178

1 mg/L (ppm).

(c) Combined waste receipts from subparts A and B of this part. (1) As provided in § 437.42(a), any existing point source subject to this paragraph must achieve the following effluent limitations representing the application of BPT:

BPT Limitations

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Conventional ParametersO&G12738.0 pH( 2)( 2) TSS74.130.6 Metal ParametersAntimony0.2490.206 Arsenic0.1620.104 Cadmium0.01720.0102 Chromium0.7460.323 Cobalt0.1920.124 Copper0.5000.242 Lead0.3500.160 Mercury0.002340.000739 Nickel3.951.45 Silver0.1200.0351 Tin0.4090.120 Titanium0.09470.0618 Vanadium0.2180.0662 Zinc2.870.641 Organic ParametersBis(2-ethylhexyl) phthalate0.2150.101 Butylbenzyl phthalate0.1880.0887 Carbazole0.5980.276 n-Decane0.9480.437 Fluoranthene0.05370.0268 n-Octadecane0.5890.302

1 mg/L (ppm).

2 Within the range 6 to 9.

(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:

In-Plant Limitations

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Cyanide500178

1 mg/L (ppm).

(d) Combined waste receipts from subparts A and C of this part. (1) As provided in § 437.42(a), any existing point source subject to this paragraph must achieve the following effluent limitations representing the application of BPT:

BPT Limitations

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Conventional ParametersBOD 516353.0 O&G20550.2 pH( 2)( 2) TSS60.031.0 Metal ParametersAntimony0.2490.206 Arsenic0.1620.104 Cadmium0.4740.0962 Chromium15.53.07 Cobalt0.1920.124 Copper0.8650.757 Lead1.320.283 Mercury0.002340.000739 Nickel3.951.45 Silver0.1200.0351 Tin0.4090.120 Titanium0.09470.0618 Vanadium0.2180.0662 Zinc0.4970.420 Organic ParametersAcetone30.27.97 Acetophenone0.1140.0562 2-Butanone4.811.85 o-Cresol1.920.561 p-Cresol0.6980.205 Phenol3.651.08 Pyridine0.3700.182 2,4,6-Trichlorophenol0.1550.106

1 mg/L (ppm).

2 Within the range 6 to 9.

(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:

In-Plant Limitations

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Cyanide500178

1 mg/L (ppm).

(e) Combined waste receipts from subparts B and C of this part. As provided in § 437.42(a), any existing point source subject to this paragraph must achieve the following effluent limitations representing the application of BPT:

BPT Limitations

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Conventional ParametersBOD516353.0 O&G12738.0 pH( 2)( 2) TSS74.130.6 Metal ParametersArsenic2.951.33 Cadmium0.01720.0102 Chromium0.7460.323 Cobalt56.418.8 Copper0.5000.242 Lead0.3500.160 Mercury0.01720.00647 Tin0.3350.165 Zinc0.4970.420 Organic ParametersAcetone30.27.97 Acetophenone0.1140.0562 Bis(2-ethylhexyl) phthalate0.2150.101 2-Butanone4.811.85 Butylbenzyl phthalate0.1880.0887 Carbazole0.5980.276 o-Cresol1.920.561 p-Cresol0.6980.205 n-Decane0.9480.437 Fluoranthene0.05370.0268 n-Octadecane0.5890.302 Phenol3.651.08 Pyridine0.3700.182 2,4,6-Trichlorophenol0.1550.106

1 mg/L (ppm).

2 Within the range 6 to 9.

[65 FR 81300, Dec. 22, 2000, as amended at 68 FR 71023, 71024, Dec. 22, 2003]

§ 437.43 - Effluent limitations attainable by the application of the best conventional pollutant control technology (BCT).

(a) Except as provided in 40 CFR 125.30 through 125.32 or § 437.40(b), any existing facility subject to this subpart which combines treated or untreated wastes from subparts A, B, or C of this part may be subject to Multiple Wastestream Subcategory effluent limitations representing the application of BCT set forth in paragraphs (b), (c), (d), or (e) of this section if the discharger agrees to the following conditions in its NPDES permit:

(1) The discharger will meet the applicable Multiple Wastestream Subcategory limitations set forth in paragraphs (b), (c), (d) or (e) of this section;

(2) The discharger will notify its NPDES permit writer at the time of renewal or modification of its permit, of its desire to be subject to the Multiple Waste Subcategory by submitting to the NPDES permit writer an initial certification statement as described in § 437.41(a);

(3) The discharger will submit to its NPDES permitting authority a periodic certification statement as described in § 437.41(b) once a year; and

(4) The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in § 437.41(c).

(b) Combined waste receipts from subparts A, B and C of this part: Limitations for BOD5, O&G, pH, and TSS are the same as the corresponding limitation specified in § 437.42(b).

(c) Combined waste receipts from subparts A and B of this part: Limitations for O&G, pH, and TSS are the same as the corresponding limitation specified in § 437.42(c).

(d) Combined waste receipts from subparts A and C of this part: Limitations for BOD5, O&G, pH, and TSS are the same as the corresponding limitation specified in § 437.42(d).

(e) Combined waste receipts from subparts B and C of this part: Limitations for BOD5, O&G, pH, and TSS are the same as the corresponding limitation specified in § 437.42(e).

§ 437.44 - Effluent limitations attainable by the application of the best available technology economically achievable (BAT).

(a) Except as provided in 40 CFR 125.30 through 125.32 or § 437.40(b), any existing facility subject to this subpart which combines treated or untreated wastes from subparts A, B, or C of this part may be subject to Multiple Wastestream Subcategory effluent limitations representing the application of BAT set forth in paragraphs (b), (c), (d), or (e) of this section if the discharger agrees to the following conditions in its NPDES permit:

(1) The discharger will meet the applicable Multiple Wastestream Subcategory limitations set forth in paragraphs (b), (c), (d) or (e) of this section;

(2) The discharger will notify its NPDES permit writer at the time of renewal or modification of its permit, of its desire to be subject to the Multiple Waste Subcategory by submitting to the NPDES permit writer an initial certification statement as described in § 437.41(a);

(3) The discharger will submit to its NPDES permitting authority a periodic certification statement as described in § 437.41(b) once a year; and

(4) The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in § 437.41(c).

(b) Combined waste receipts from subparts A, B and C of this part. (1) Limitations for the following parameters are the same as the corresponding limitation specified in § 437.42(b)(1):

Organic parameters Acetone Acetophenone bis (2-ethylhexyl) phthalate 2-Butanone Butylbenzyl phthalate Carbazole o-Cresol p-Cresol n-Decane Fluoranthene n-Octadecane Phenol Pyridine 2,4,6-trichlorophenol Metal parameters Antimony Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Nickel Silver Tin Titanium Vanadium Zinc

(2) The in-plant limitations that apply to metal-bearing wastewater containing cyanide are the same as the corresponding limitations specified in § 437.42(b)(2).

(c) Combined waste receipts from subparts A and B of this part. (1) Limitations for the following parameters are the same as the corresponding limitation specified in § 437.42(c)(1):

Organic parameters Bis (2-ethylhexyl) phthalate Butylbenzyl phthalate Carbazole n-Decane Fluoranthene n-Octadecane Metal parameters Antimony Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Nickel Silver Tin Titanium Vanadium Zinc

(2) The in-plant limitations that apply to metal-bearing wastewater containing cyanide are the same as the corresponding limitations specified in § 437.42(c)(2).

(d) Combined waste receipts from subparts A and C of this part. (1) Limitations for the following parameters are the same as the corresponding limitation specified in § 437.42(d)(1):

Organic parameters Acetone Acetophenone 2-Butanone o-Cresol p-Cresol Phenol Pyridine 2,4,6-trichlorophenol Metal parameters Antimony Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Nickel Silver Tin Titanium Vanadium Zinc

(2) The in-plant limitations that apply to metal-bearing wastewater containing cyanide are the same as the corresponding limitations specified in § 437.42(e)(2).

(e) Combined waste receipts from subparts B and C of this part. Limitations for the following parameters are the same as the corresponding limitation specified in § 437.42(e):

Organic parameters Acetone Acetophenone Bis(2-ethylhexyl) phthalate 2-Butanone Butylbenzyl phthalate Carbazole o-Cresol p-Cresol n-Decane Fluoranthene n-Octadecane Phenol Pyridine 2,4,6-trichlorophenol Metal parameters Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Tin Zinc [65 FR 81300, Dec. 22, 2000, as amended at 68 FR 71024, 71025, Dec. 22, 2003]

§ 437.45 - New source performance standards (NSPS).

(a) Except as provided in § 437.40(b), any new source subject to this subpart which combines treated or untreated wastes from subparts A, B, or C of this part may be subject to Multiple Wastestream Subcategory effluent limitations representing the application of NSPS set forth in paragraphs (b), (c), (d), or (e) of this section if the discharger agrees to the following conditions in its NPDES permit:

(1) The discharger will meet the applicable Multiple Wastestream Subcategory limitations set forth in paragraphs (b), (c), (d) or (e) of this section;

(2) The discharger will notify its NPDES permit writer at the time of submitting its application for permit, of its desire to be subject to the Multiple Waste Subcategory by submitting to the NPDES permit writer an initial certification statement as described in § 437.41(a);

(3) The discharger will submit to its NPDES permitting authority a periodic certification statement as described in § 437.41(b) once a year; and

(4) The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in § 437.41(c).

(b) Combined waste receipts from subparts A, B and C of this part. (1) As provided in § 437.45(a), any new source subject to this paragraph must achieve the following performance standards:

Performance Standards

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Conventional ParametersBOD 516353.0 O&G12738.0 pH( 2)( 2) TSS29.611.3 Metal ParametersAntimony0.1110.0312 Arsenic0.09930.0199 Cadmium0.01720.0102 Chromium0.1670.0522 Cobalt0.1820.0703 Copper0.6590.216 Lead0.3500.160 Mercury0.0006410.000246 Nickel0.7940.309 Selenium0.1760.0698 Silver0.03180.0122 Tin0.09550.0367 Titanium0.01590.00612 Vanadium0.06280.0518 Zinc0.6570.252 Organic ParametersAcetone30.27.97 Acetophenone0.1140.0562 Bis(2-ethylhexyl) phthalate0.2150.101 2-Butanone4.811.85 Butylbenzyl phthalate0.1880.0887 Carbazole0.5980.276 o-Cresol1.920.561 p-Cresol0.6980.205 n-Decane0.9480.437 Fluoranthene0.05370.0268 n-Octadecane0.5890.302 Phenol3.651.08 Pyridine0.3700.182 2,4,6-Trichlorophenol0.1550.106

1 mg/L (ppm).

2 Within the range 6 to 9.

(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:

In-Plant Limitations

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Cyanide500178

1 mg/L (ppm).

(c) Combined waste receipts from subparts A and B of this part. (1) As provided in § 437.45(a), any new source subject to this paragraph must achieve the following standards:

Performance Standards

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Conventional ParametersO&G12738.0 pH( 2)( 2) TSS29.611.3 Metal ParametersAntimony0.1110.0312 Arsenic0.09930.0199 Cadmium0.01720.0102 Chromium0.1670.0522 Cobalt0.1820.0703 Copper0.6590.216 Lead0.3500.160 Mercury0.0006410.000246 Nickel0.7940.309 Selenium0.1760.0698 Silver0.03180.0122 Tin0.09550.0367 Titanium0.01590.00612 Vanadium0.06280.0518 Zinc0.6570.252 Organic ParametersBis(2-ethylhexyl) phthalate0.2150.101 Butylbenzyl phthalate0.1880.0887 Carbazole0.5980.276 n-Decane0.9480.437 Fluoranthene0.05370.0268 n-Octadecane0.5890.302

1 mg/L (ppm).

2 Within the range 6 to 9.

(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:

In-Plant Limitations

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Cyanide500178

1 1 mg/L (ppm).

(d) Combined waste receipts from subparts A and C of this part. (1) As provided in § 437.45(a), any new source subject to this paragraph must achieve the following performance standards:

Performance Standards

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Conventional ParametersBOD516353.0 O&G20550.2 pH( 2)( 2) TSS29.611.3 Metal ParametersAntimony0.1110.0312 Arsenic0.09930.0199 Cadmium0.7820.163 Chromium0.1670.0522 Cobalt0.1820.0703 Copper0.6590.216 Lead1.320.283 Mercury0.0006410.000246 Nickel0.7940.309 Selenium0.1760.0698 Silver0.03180.0122 Tin0.09550.0367 Titanium0.01590.00612 Vanadium0.06280.0518 Zinc0.6570.252 Organic ParametersAcetone30.27.97 Acetophenone0.1140.0562 2-Butanone4.811.85 o-Cresol1.920.561 p-Cresol0.6980.205 Phenol3.651.08 Pyridine0.3700.182 2,4,6-Trichlorophenol0.1550.106

1 mg/L (ppm).

2 Within the range 6 to 9.

(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:

In-Plant Limitations

Regulated
parameter
Maximum daily 1Maximum monthly avg.1Cyanide500178

1 mg/L (ppm).

(e) Combined waste receipts from subparts B and C of this part. As provided in § 437.45(a), any new source subject to this paragraph must achieve the following performance standards:

Performance Standards

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Conventional ParametersBOD516353.0 O&G12738.0 pH(2)(2) TSS74.130.6 Metal ParametersArsenic2.951.33 Cadmium0.01720.0102 Chromium0.7460.323 Cobalt56.418.8 Copper0.5000.242 Lead0.3500.160 Mercury0.01720.00647 Tin0.3350.165 Zinc0.4970.420 Organic ParametersAcetone30.27.97 Acetophenone0.1140.0562 Bis(2-ethylhexyl) phthalate0.2150.101 2-Butanone4.811.85 Butylbenzyl phthalate0.1880.0887 Carbazole0.5980.276 o-Cresol1.920.561 p-Cresol0.6980.205 n-Decane0.9480.437 Fluoranthene0.05370.0268 n-Octadecane0.5890.302 Phenol3.651.08 Pyridine0.3700.182 2,4,6-Trichlorophenol0.1550.106

1 mg/L (ppm).

2 Within the range 6 to 9.

[65 FR 81300, Dec. 22, 2000, as amended at 68 FR 71025, Dec. 22, 2003]

§ 437.46 - Pretreatment standards for existing sources (PSES).

(a) Except as provided in 40 CFR 403.7, § 403.13 or § 437.40(b), any new source subject to this subpart which combines treated or untreated wastes from subparts A, B, or C of this part may be subject to Multiple Wastestream Subcategory pretreatment standards representing the application of PSES set forth in paragraphs (b), (c), (d), or (e) of this section if the discharger agrees to the following conditions in its permit:

(1) The discharger will meet the applicable Multiple Wastestream

Subcategory standards set forth in paragraphs (b), (c), (d) or (e) of this section;

(2) The discharger will notify its local control authority of its desire to be subject to the Multiple Waste Subcategory by submitting to the local control authority an initial certification statement as described in § 437.41(a);

(3) The discharger will submit to its local control authority a periodic certification statement as described in § 437.41(b) once a year; and

(4) The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in § 437.41(c).

(b) Combined waste receipts from subparts A, B and C of this part. (1) As provided in § 437.46(a), and no later than [Insert date—three years after publication], any existing source subject to this paragraph must achieve the following pretreatment standards:

Pretreatment Standards (PSES)

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Metal ParametersAntimony0.2490.206 Arsenic0.1620.104 Cadmium0.4740.0962 Chromium0.9470.487 Cobalt0.1920.124 Copper0.4050.301 Lead0.2220.172 Mercury0.002340.000739 Nickel3.951.45 Silver0.1200.0351 Tin0.4090.120 Titanium0.09470.0618 Vanadium0.2180.0662 Zinc2.870.641 Organic ParametersBis(2-ethylhexyl) phthalate0.2670.158 Carbazole0.3920.233 o-Cresol1.920.561 p-Cresol0.6980.205 n-Decane5.793.31 Fluoranthene0.7870.393 n-Octadecane1.220.925 2,4,6-Trichlorophenol0.1550.106

1 mg/L (ppm).

(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:

In-Plant Limitations

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Cyanide500178

1 mg/L (ppm).

(c) Combined waste receipts from subparts A and B of this part. (1) As provided in § 437.46(a), and no later than December 22, 2003, any existing source subject to this paragraph must achieve the following pretreatment standards:

Pretreatment Standards (PSES)

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Metal ParametersAntimony0.2490.206 Arsenic0.1620.104 Cadmium0.4740.0962 Chromium0.9470.487 Cobalt0.1920.124 Copper0.4050.301 Lead0.2220.172 Mercury0.002340.000739 Nickel3.951.45 Silver0.1200.0351 Tin0.4090.120 Titanium0.09470.0618 Vanadium0.2180.0662 Zinc2.870.641 Organic ParametersBis(2-ethylhexyl) phthalate0.2670.158 Carbazole0.3920.233 n-Decane5.793.31 Fluoranthene0.7870.393 n-Octadecane1.220.925

1 mg/L (ppm).

(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:

In-Plant Limitations

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Cyanide500178

1 mg/L (ppm).

(d) Combined waste receipts from subparts A and C of this part. (1) As provided in § 437.46(a), and no later than December 22, 2003, any existing source subject to this paragraph must achieve the following pretreatment standards:

Pretreatment Standards (PSES)

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Metal ParametersAntimony0.2490.206 Arsenic0.1620.104 Cadmium0.4740.0962 Chromium15.53.07 Cobalt0.1920.124 Copper4.141.06 Lead1.320.283 Mercury0.002340.000739 Nickel3.951.45 Silver0.1200.0351 Tin0.4090.120 Titanium0.09470.0618 Vanadium0.2180.0662 Zinc2.870.641 Organic Parameterso-Cresol1.920.561 p-Cresol0.6980.205 2,4,6-Trichlorophenol0.1550.106

1 mg/L (ppm).

(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:

In-Plant Limitations

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Cyanide500178

1 mg/L (ppm).

(e) Combined waste receipts from subparts B and C of this part. As provided in § 437.46(a), and no later than December 22, 2003, any existing source subject to this paragraph must achieve the following pretreatment standards:

Pretreatment Standards (PSES)

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Metal ParametersChromium0.9470.487 Cobalt56.418.8 Copper0.4050.301 Lead0.2220.172 Tin0.2490.146 Zinc6.954.46 Organic ParametersBis (2-ethylhexyl) phthalate0.2670.158 Carbazole0.3920.233 o-Cresol1.920.561 p-Cresol0.6980.205 n-Decane5.793.31 Fluoranthene0.7870.393 n-Octadecane1.220.925 2,4,6-Trichlorophenol0.1550.106

1 mg/L (ppm).

[65 FR 81300, Dec. 22, 2000, as amended at 68 FR 71025, Dec. 22, 2003]

§ 437.47 - Pretreatment standards for new sources (PSNS).

(a) Except as provided in 40 CFR 403.7 or § 437.40(b), any new source subject to this subpart which combines treated or untreated wastes from subparts A, B, or C of this part may be subject to Multiple Wastestream Subcategory pretreatment standards representing the application of PSNS set forth in paragraphs (b), (c), (d), or (e) of this section if the discharger agrees to the following conditions in its permit:

(1) The discharger will meet the applicable Multiple Wastestream Subcategory standards set forth in paragraphs (b), (c), (d) or (e) of this section;

(2) The discharger will notify its local control authority at the time of submitting its application for an individual control mechanism or pretreatment agreement of its desire to be subject to Multiple Waste Subcategory by submitting to the local control authority an initial certification statement as described in § 437.41(a);

(3) The discharger will submit to its local control authority a periodic certification statements as described in § 437.41(b) once a year; and

(4) The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in § 437.41(c).

(b) Combined waste receipts from subparts A, B and C of this part. (1) As provided in § 437.47(a), any new source subject to this paragraph must achieve the following pretreatment standards:

Pretreatment Standards (PSNS)

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Metal ParametersAntimony0.2490.206 Arsenic0.1620.104 Cadmium0.4740.0962 Chromium0.7460.323 Cobalt0.1920.124 Copper0.5000.242 Lead0.3500.160 Mercury0.002340.000739 Nickel3.951.45 Silver0.1200.0351 Tin0.4090.120 Titanium0.09470.0618 Vanadium0.2180.0662 Zinc2.870.641 Organic ParametersBis(2-ethylhexyl) phthalate0.2150.101 Carbazole0.5980.276 o-Cresol1.920.561 p-Cresol0.6980.205 n-Decane0.9480.437 Fluoranthene0.05370.0268 n-Octadecane0.5890.302 2,4,6-Trichlorophenol0.1550.106

1 mg/L (ppm).

(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:

In-Plant Limitations

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Cyanide500178

1 mg/L (ppm).

(c) Combined waste receipts from subparts A and B of this part. (1) As provided in § 437.47(a), any new source subject to this paragraph must achieve the following pretreatment standards:

Pretreatment Standards (PSNS)

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Metal ParatmetersAntimony0.2490.206 Arsenic0.1620.104 Cadmium0.4740.0962 Chromium0.7460.323 Cobalt0.1920.124 Copper0.5000.242 Lead0.3500.160 Mercury0.002340.000739 Nickel3.951.45 Silver0.1200.0351 Tin0.4090.120 Titanium0.09470.0618 Vanadium0.2180.0662 Zinc2.870.641 Organic ParametersBis (2-ethylhexyl) phthalate0.2150.101 Carbazole0.5980.276 n-Decane0.9480.437 Fluoranthene0.05370.0268 n-Octadecane0.5890.302

1 mg/L (ppm).

(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:

In-Plant Limitations

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Cyanide500178

1 mg/L (ppm).

(d) Combined waste receipts from subparts A and C of this part. (1) As provided in § 437.47(a), any new source subject to this paragraph must achieve the following pretreatment standards:

Pretreatment Standards (PSNS)

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Metal ParametersAntimony0.2490.206 Arsenic0.1620.104 Cadmium0.4740.0962 Chromium15.53.07 Cobalt0.1920.124 Copper4.141.06 Lead1.320.283 Mercury0.002340.000739 Nickel3.951.45 Silver0.1200.0351 Tin0.4090.120 Titanium0.09470.0618 Vanadium0.2180.0662 Zinc2.870.641 Organic Parameterso-Cresol1.920.561 p-Cresol0.6980.205 2,4,6-Trichlorophenol0.1550.106

1 mg/L (ppm).

(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:

In-Plant Limitations

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Cyanide500178

1 mg/L (ppm).

(e) Combined waste receipts from subparts B and C of this part. As provided in § 437.47(a), any new source subject to this paragraph must achieve the following pretreatment standards:

Pretreatment Standards (PSNS)

Regulated
parameter
Maximum daily 1Maximum monthly avg. 1Metal ParametersChromium0.7460.323 Cobalt56.418.8 Copper0.5000.242 Lead0.3500.160 Tin0.3350.165 Zinc8.264.50 Organic ParametersBis(2-ethylhexyl) phthalate0.2150.101 Carbazole0.5980.276 o-Cresol1.920.561 p-Cresol0.6980.205 n-Decane0.9480.437 Fluoranthene0.05370.0268 n-Octadecane0.5890.302 2,4,6-Trichlorophenol0.1550.106

1 mg/L (ppm).

[65 FR 81300, Dec. 22, 2000, as amended at 68 FR 71025, 71026, Dec. 22, 2003]