Collapse to view only § 437.47 - Pretreatment standards for new sources (PSNS).
- § 437.40 - Applicability.
- § 437.41 - Special definitions.
- § 437.42 - Effluent limitations attainable by the application of the best practicable control technology currently available (BPT).
- § 437.43 - Effluent limitations attainable by the application of the best conventional pollutant control technology (BCT).
- § 437.44 - Effluent limitations attainable by the application of the best available technology economically achievable (BAT).
- § 437.45 - New source performance standards (NSPS).
- § 437.46 - Pretreatment standards for existing sources (PSES).
- § 437.47 - Pretreatment standards for new sources (PSNS).
§ 437.40 - Applicability.
(a) Except as provided in § 437.1(b), (c), or (d) or in paragraph (b) of this section, facilities that treat wastes subject to more than one of the previous subparts must comply with either provisions of this subpart or the applicable provisions of subpart A, B, or C. The provisions of this subpart are applicable to that portion of wastewater discharges from a centralized waste treatment facility that results from mixing any combination of treated or untreated waste otherwise subject to subpart A, subpart B, or subpart C of this part only if a facility requests the permit writer or control authority to develop subpart D limitations (or standards) and establishes that it provides equivalent treatment as defined in § 437.2(h).
(b) In order to ensure appropriate treatment rather than dilution of dissimilar wastes, an NPDES permit writer or control authority may require a new or existing facility subject to paragraph (a) of this section to achieve alternative effluent limitations or standards as defined in § 437.2 (b) in the following circumstances:
(1) The facility receives, on a continuing basis, flows of process wastewater from five or fewer facilities subject to 40 CFR subchapter N limitations and standards; and
(2) The process wastewater flows received for treatment at the facility have relatively consistent pollutant profiles.
§ 437.41 - Special definitions.
(a) Initial Certification Statement for this subpart means a written submission to the appropriate permitting authority (either the local control authority (the POTW) or NPDES permit writer) that is signed by the responsible corporate officer as defined in 40 CFR 403.12(l) or 40 CFR 122.22. The statement must:
(1) List and describe the subcategories of wastes accepted for treatment at the facility;
(2) List and describe the treatment systems in-place at the facility and conditions under which the treatment systems are operated for the subcategories of wastes accepted for treatment at the facility;
(3) Include information and supporting data establishing that these treatment systems will achieve equivalent treatment.
(b) Periodic Certification Statement for this subpart means a written submission to the appropriate permitting authority (the local control authority (the POTW) or NPDES permit writer) which certifies that the facility is operating its treatment systems to provide equivalent treatment as set forth in the initial certification. In the event that the facility has modified its treatment systems, the facility should submit a description of the modified systems and information and supporting data to establish that the modified system will achieve equivalent treatment. The periodic certification statement must be signed by the responsible corporate officer as defined in 40 CFR 403.12(l) or 40 CFR 122.22.
(c) On-site Compliance Paperwork for this subpart means data or information retained in the offices of the facility which supports the initial and periodic certification statements. This Paperwork must:
(1) List and describe the subcategory wastes being accepted for treatment at the facility;
(2) List and describe the treatment systems in-place at the facility, modifications to the treatment systems and the conditions under which the systems are operated for the subcategories of wastes accepted for treatment at the facility;
(3) Provide information and supporting data establishing that these treatment systems will achieve equivalent treatment;
(4) Describe the procedures it follows to ensure that its treatment systems are well-operated and maintained; and
(5) Explain why the procedures it has adopted will ensure its treatment systems are well-operated and maintained.
§ 437.42 - Effluent limitations attainable by the application of the best practicable control technology currently available (BPT).
(a) Except as provided in 40 CFR 125.30 through 125.32 or § 437.40(b), any existing facility subject to this subpart which combines treated or untreated wastes from subparts A, B, or C of this part may be subject to Multiple Wastestream Subcategory effluent limitations representing the application of BPT set forth in paragraphs (b), (c), (d), or (e) of this section if the discharger agrees to the following conditions in its NPDES permit:
(1) The discharger will meet the applicable Multiple Wastestream Subcategory limitations set forth in (b), (c), (d) or (e);
(2) The discharger will notify its NPDES permit writer at the time of renewal or modification of its permit, of its desire to be subject to the Multiple Waste Subcategory by submitting to the NPDES permit writer an initial certification statement as described in § 437.41(a);
(3) The discharger will submit to its NPDES permitting authority a periodic certification statement as described in § 437.41(b) once a year; and
(4) The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in § 437.41(c).
(b) Combined waste receipts from subparts A, B, and C of this part. (1) As provided in § 437.42(a), any existing point source subject to this paragraph must achieve the following effluent limitations representing the application of BPT:
BPT Limitations
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | BOD | 163 | 53.0 | O&G | 127 | 38.0 | pH | ( 2) | ( 2) | TSS | 74.1 | 30.6 | Antimony | 0.249 | 0.206 | Arsenic | 0.162 | 0.104 | Cadmium | 0.0172 | 0.0102 | Chromium | 0.746 | 0.323 | Cobalt | 0.192 | 0.124 | Copper | 0.500 | 0.242 | Lead | 0.350 | 0.160 | Mercury | 0.00234 | 0.000739 | Nickel | 3.95 | 1.45 | Silver | 0.120 | 0.0351 | Tin | 0.409 | 0.120 | Titanium | 0.0947 | 0.0618 | Vanadium | 0.218 | 0.0662 | Zinc | 0.497 | 0.420 | Acetone | 30.2 | 7.97 | Acetophenone | 0.114 | 0.0562 | Bis(2-ethylhexyl) phthalate | 0.215 | 0.101 | 2-Butanone | 4.81 | 1.85 | Butylbenzyl phthalate | 0.188 | 0.0887 | Carbazole | 0.598 | 0.276 | 1.92 | 0.561 | 0.698 | 0.205 | n-Decane | 0.948 | 0.437 | Fluoranthene | 0.0537 | 0.0268 | n-Octadecane | 0.589 | 0.302 | Phenol | 3.65 | 1.08 | Pyridine | 0.370 | 0.182 | 2,4,6-Trichlorophenol | 0.155 | 0.106 |
---|
1 mg/L (ppm).
2 OSC Within the range 6 to 9.
(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:
In-Plant Limitations
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Cyanide | 500 | 178 |
---|
1 mg/L (ppm).
(c) Combined waste receipts from subparts A and B of this part. (1) As provided in § 437.42(a), any existing point source subject to this paragraph must achieve the following effluent limitations representing the application of BPT:
BPT Limitations
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | O&G | 127 | 38.0 | pH | ( 2) | ( 2) | TSS | 74.1 | 30.6 | Antimony | 0.249 | 0.206 | Arsenic | 0.162 | 0.104 | Cadmium | 0.0172 | 0.0102 | Chromium | 0.746 | 0.323 | Cobalt | 0.192 | 0.124 | Copper | 0.500 | 0.242 | Lead | 0.350 | 0.160 | Mercury | 0.00234 | 0.000739 | Nickel | 3.95 | 1.45 | Silver | 0.120 | 0.0351 | Tin | 0.409 | 0.120 | Titanium | 0.0947 | 0.0618 | Vanadium | 0.218 | 0.0662 | Zinc | 2.87 | 0.641 | Bis(2-ethylhexyl) phthalate | 0.215 | 0.101 | Butylbenzyl phthalate | 0.188 | 0.0887 | Carbazole | 0.598 | 0.276 | n-Decane | 0.948 | 0.437 | Fluoranthene | 0.0537 | 0.0268 | n-Octadecane | 0.589 | 0.302 |
---|
1 mg/L (ppm).
2 Within the range 6 to 9.
(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:
In-Plant Limitations
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Cyanide | 500 | 178 |
---|
1 mg/L (ppm).
(d) Combined waste receipts from subparts A and C of this part. (1) As provided in § 437.42(a), any existing point source subject to this paragraph must achieve the following effluent limitations representing the application of BPT:
BPT Limitations
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | BOD | 163 | 53.0 | O&G | 205 | 50.2 | pH | ( 2) | ( 2) | TSS | 60.0 | 31.0 | Antimony | 0.249 | 0.206 | Arsenic | 0.162 | 0.104 | Cadmium | 0.474 | 0.0962 | Chromium | 15.5 | 3.07 | Cobalt | 0.192 | 0.124 | Copper | 0.865 | 0.757 | Lead | 1.32 | 0.283 | Mercury | 0.00234 | 0.000739 | Nickel | 3.95 | 1.45 | Silver | 0.120 | 0.0351 | Tin | 0.409 | 0.120 | Titanium | 0.0947 | 0.0618 | Vanadium | 0.218 | 0.0662 | Zinc | 0.497 | 0.420 | Acetone | 30.2 | 7.97 | Acetophenone | 0.114 | 0.0562 | 2-Butanone | 4.81 | 1.85 | 1.92 | 0.561 | 0.698 | 0.205 | Phenol | 3.65 | 1.08 | Pyridine | 0.370 | 0.182 | 2,4,6-Trichlorophenol | 0.155 | 0.106 |
---|
1 mg/L (ppm).
2 Within the range 6 to 9.
(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:
In-Plant Limitations
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Cyanide | 500 | 178 |
---|
1 mg/L (ppm).
(e) Combined waste receipts from subparts B and C of this part. As provided in § 437.42(a), any existing point source subject to this paragraph must achieve the following effluent limitations representing the application of BPT:
BPT Limitations
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | BOD | 163 | 53.0 | O&G | 127 | 38.0 | pH | ( 2) | ( 2) | TSS | 74.1 | 30.6 | Arsenic | 2.95 | 1.33 | Cadmium | 0.0172 | 0.0102 | Chromium | 0.746 | 0.323 | Cobalt | 56.4 | 18.8 | Copper | 0.500 | 0.242 | Lead | 0.350 | 0.160 | Mercury | 0.0172 | 0.00647 | Tin | 0.335 | 0.165 | Zinc | 0.497 | 0.420 | Acetone | 30.2 | 7.97 | Acetophenone | 0.114 | 0.0562 | Bis(2-ethylhexyl) phthalate | 0.215 | 0.101 | 2-Butanone | 4.81 | 1.85 | Butylbenzyl phthalate | 0.188 | 0.0887 | Carbazole | 0.598 | 0.276 | 1.92 | 0.561 | 0.698 | 0.205 | n-Decane | 0.948 | 0.437 | Fluoranthene | 0.0537 | 0.0268 | n-Octadecane | 0.589 | 0.302 | Phenol | 3.65 | 1.08 | Pyridine | 0.370 | 0.182 | 2,4,6-Trichlorophenol | 0.155 | 0.106 |
---|
1 mg/L (ppm).
2 Within the range 6 to 9.
§ 437.43 - Effluent limitations attainable by the application of the best conventional pollutant control technology (BCT).
(a) Except as provided in 40 CFR 125.30 through 125.32 or § 437.40(b), any existing facility subject to this subpart which combines treated or untreated wastes from subparts A, B, or C of this part may be subject to Multiple Wastestream Subcategory effluent limitations representing the application of BCT set forth in paragraphs (b), (c), (d), or (e) of this section if the discharger agrees to the following conditions in its NPDES permit:
(1) The discharger will meet the applicable Multiple Wastestream Subcategory limitations set forth in paragraphs (b), (c), (d) or (e) of this section;
(2) The discharger will notify its NPDES permit writer at the time of renewal or modification of its permit, of its desire to be subject to the Multiple Waste Subcategory by submitting to the NPDES permit writer an initial certification statement as described in § 437.41(a);
(3) The discharger will submit to its NPDES permitting authority a periodic certification statement as described in § 437.41(b) once a year; and
(4) The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in § 437.41(c).
(b) Combined waste receipts from subparts A, B and C of this part: Limitations for BOD
(c) Combined waste receipts from subparts A and B of this part: Limitations for O&G, pH, and TSS are the same as the corresponding limitation specified in § 437.42(c).
(d) Combined waste receipts from subparts A and C of this part: Limitations for BOD
(e) Combined waste receipts from subparts B and C of this part: Limitations for BOD
§ 437.44 - Effluent limitations attainable by the application of the best available technology economically achievable (BAT).
(a) Except as provided in 40 CFR 125.30 through 125.32 or § 437.40(b), any existing facility subject to this subpart which combines treated or untreated wastes from subparts A, B, or C of this part may be subject to Multiple Wastestream Subcategory effluent limitations representing the application of BAT set forth in paragraphs (b), (c), (d), or (e) of this section if the discharger agrees to the following conditions in its NPDES permit:
(1) The discharger will meet the applicable Multiple Wastestream Subcategory limitations set forth in paragraphs (b), (c), (d) or (e) of this section;
(2) The discharger will notify its NPDES permit writer at the time of renewal or modification of its permit, of its desire to be subject to the Multiple Waste Subcategory by submitting to the NPDES permit writer an initial certification statement as described in § 437.41(a);
(3) The discharger will submit to its NPDES permitting authority a periodic certification statement as described in § 437.41(b) once a year; and
(4) The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in § 437.41(c).
(b) Combined waste receipts from subparts A, B and C of this part. (1) Limitations for the following parameters are the same as the corresponding limitation specified in § 437.42(b)(1):
Organic parameters Acetone Acetophenone bis (2-ethylhexyl) phthalate 2-Butanone Butylbenzyl phthalate Carbazole o-Cresol p-Cresol n-Decane Fluoranthene n-Octadecane Phenol Pyridine 2,4,6-trichlorophenol Metal parameters Antimony Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Nickel Silver Tin Titanium Vanadium Zinc(2) The in-plant limitations that apply to metal-bearing wastewater containing cyanide are the same as the corresponding limitations specified in § 437.42(b)(2).
(c) Combined waste receipts from subparts A and B of this part. (1) Limitations for the following parameters are the same as the corresponding limitation specified in § 437.42(c)(1):
Organic parameters Bis (2-ethylhexyl) phthalate Butylbenzyl phthalate Carbazole n-Decane Fluoranthene n-Octadecane Metal parameters Antimony Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Nickel Silver Tin Titanium Vanadium Zinc(2) The in-plant limitations that apply to metal-bearing wastewater containing cyanide are the same as the corresponding limitations specified in § 437.42(c)(2).
(d) Combined waste receipts from subparts A and C of this part. (1) Limitations for the following parameters are the same as the corresponding limitation specified in § 437.42(d)(1):
Organic parameters Acetone Acetophenone 2-Butanone o-Cresol p-Cresol Phenol Pyridine 2,4,6-trichlorophenol Metal parameters Antimony Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Nickel Silver Tin Titanium Vanadium Zinc(2) The in-plant limitations that apply to metal-bearing wastewater containing cyanide are the same as the corresponding limitations specified in § 437.42(e)(2).
(e) Combined waste receipts from subparts B and C of this part. Limitations for the following parameters are the same as the corresponding limitation specified in § 437.42(e):
Organic parameters Acetone Acetophenone Bis(2-ethylhexyl) phthalate 2-Butanone Butylbenzyl phthalate Carbazole o-Cresol p-Cresol n-Decane Fluoranthene n-Octadecane Phenol Pyridine 2,4,6-trichlorophenol Metal parameters Arsenic Cadmium Chromium Cobalt Copper Lead Mercury Tin Zinc§ 437.45 - New source performance standards (NSPS).
(a) Except as provided in § 437.40(b), any new source subject to this subpart which combines treated or untreated wastes from subparts A, B, or C of this part may be subject to Multiple Wastestream Subcategory effluent limitations representing the application of NSPS set forth in paragraphs (b), (c), (d), or (e) of this section if the discharger agrees to the following conditions in its NPDES permit:
(1) The discharger will meet the applicable Multiple Wastestream Subcategory limitations set forth in paragraphs (b), (c), (d) or (e) of this section;
(2) The discharger will notify its NPDES permit writer at the time of submitting its application for permit, of its desire to be subject to the Multiple Waste Subcategory by submitting to the NPDES permit writer an initial certification statement as described in § 437.41(a);
(3) The discharger will submit to its NPDES permitting authority a periodic certification statement as described in § 437.41(b) once a year; and
(4) The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in § 437.41(c).
(b) Combined waste receipts from subparts A, B and C of this part. (1) As provided in § 437.45(a), any new source subject to this paragraph must achieve the following performance standards:
Performance Standards
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | BOD | 163 | 53.0 | O&G | 127 | 38.0 | pH | ( 2) | ( 2) | TSS | 29.6 | 11.3 | Antimony | 0.111 | 0.0312 | Arsenic | 0.0993 | 0.0199 | Cadmium | 0.0172 | 0.0102 | Chromium | 0.167 | 0.0522 | Cobalt | 0.182 | 0.0703 | Copper | 0.659 | 0.216 | Lead | 0.350 | 0.160 | Mercury | 0.000641 | 0.000246 | Nickel | 0.794 | 0.309 | Selenium | 0.176 | 0.0698 | Silver | 0.0318 | 0.0122 | Tin | 0.0955 | 0.0367 | Titanium | 0.0159 | 0.00612 | Vanadium | 0.0628 | 0.0518 | Zinc | 0.657 | 0.252 | Acetone | 30.2 | 7.97 | Acetophenone | 0.114 | 0.0562 | Bis(2-ethylhexyl) phthalate | 0.215 | 0.101 | 2-Butanone | 4.81 | 1.85 | Butylbenzyl phthalate | 0.188 | 0.0887 | Carbazole | 0.598 | 0.276 | 1.92 | 0.561 | 0.698 | 0.205 | n-Decane | 0.948 | 0.437 | Fluoranthene | 0.0537 | 0.0268 | n-Octadecane | 0.589 | 0.302 | Phenol | 3.65 | 1.08 | Pyridine | 0.370 | 0.182 | 2,4,6-Trichlorophenol | 0.155 | 0.106 |
---|
1 mg/L (ppm).
2 Within the range 6 to 9.
(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:
In-Plant Limitations
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Cyanide | 500 | 178 |
---|
1 mg/L (ppm).
(c) Combined waste receipts from subparts A and B of this part. (1) As provided in § 437.45(a), any new source subject to this paragraph must achieve the following standards:
Performance Standards
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | O&G | 127 | 38.0 | pH | ( 2) | ( 2) | TSS | 29.6 | 11.3 | Antimony | 0.111 | 0.0312 | Arsenic | 0.0993 | 0.0199 | Cadmium | 0.0172 | 0.0102 | Chromium | 0.167 | 0.0522 | Cobalt | 0.182 | 0.0703 | Copper | 0.659 | 0.216 | Lead | 0.350 | 0.160 | Mercury | 0.000641 | 0.000246 | Nickel | 0.794 | 0.309 | Selenium | 0.176 | 0.0698 | Silver | 0.0318 | 0.0122 | Tin | 0.0955 | 0.0367 | Titanium | 0.0159 | 0.00612 | Vanadium | 0.0628 | 0.0518 | Zinc | 0.657 | 0.252 | Bis(2-ethylhexyl) phthalate | 0.215 | 0.101 | Butylbenzyl phthalate | 0.188 | 0.0887 | Carbazole | 0.598 | 0.276 | n-Decane | 0.948 | 0.437 | Fluoranthene | 0.0537 | 0.0268 | n-Octadecane | 0.589 | 0.302 |
---|
1 mg/L (ppm).
2 Within the range 6 to 9.
(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:
In-Plant Limitations
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Cyanide | 500 | 178 |
---|
1 1 mg/L (ppm).
(d) Combined waste receipts from subparts A and C of this part. (1) As provided in § 437.45(a), any new source subject to this paragraph must achieve the following performance standards:
Performance Standards
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | BOD | 163 | 53.0 | O&G | 205 | 50.2 | pH | ( 2) | ( 2) | TSS | 29.6 | 11.3 | Antimony | 0.111 | 0.0312 | Arsenic | 0.0993 | 0.0199 | Cadmium | 0.782 | 0.163 | Chromium | 0.167 | 0.0522 | Cobalt | 0.182 | 0.0703 | Copper | 0.659 | 0.216 | Lead | 1.32 | 0.283 | Mercury | 0.000641 | 0.000246 | Nickel | 0.794 | 0.309 | Selenium | 0.176 | 0.0698 | Silver | 0.0318 | 0.0122 | Tin | 0.0955 | 0.0367 | Titanium | 0.0159 | 0.00612 | Vanadium | 0.0628 | 0.0518 | Zinc | 0.657 | 0.252 | Acetone | 30.2 | 7.97 | Acetophenone | 0.114 | 0.0562 | 2-Butanone | 4.81 | 1.85 | 1.92 | 0.561 | 0.698 | 0.205 | Phenol | 3.65 | 1.08 | Pyridine | 0.370 | 0.182 | 2,4,6-Trichlorophenol | 0.155 | 0.106 |
---|
1 mg/L (ppm).
2 Within the range 6 to 9.
(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:
In-Plant Limitations
Regulated
parameter | Maximum daily | Maximum monthly avg. | Cyanide | 500 | 178 |
---|
1 mg/L (ppm).
(e) Combined waste receipts from subparts B and C of this part. As provided in § 437.45(a), any new source subject to this paragraph must achieve the following performance standards:
Performance Standards
Regulated
parameter | Maximum daily | Maximum monthly avg. | BOD | 163 | 53.0 | O&G | 127 | 38.0 | pH | ( | ( | TSS | 74.1 | 30.6 | Arsenic | 2.95 | 1.33 | Cadmium | 0.0172 | 0.0102 | Chromium | 0.746 | 0.323 | Cobalt | 56.4 | 18.8 | Copper | 0.500 | 0.242 | Lead | 0.350 | 0.160 | Mercury | 0.0172 | 0.00647 | Tin | 0.335 | 0.165 | Zinc | 0.497 | 0.420 | Acetone | 30.2 | 7.97 | Acetophenone | 0.114 | 0.0562 | Bis(2-ethylhexyl) phthalate | 0.215 | 0.101 | 2-Butanone | 4.81 | 1.85 | Butylbenzyl phthalate | 0.188 | 0.0887 | Carbazole | 0.598 | 0.276 | 1.92 | 0.561 | 0.698 | 0.205 | n-Decane | 0.948 | 0.437 | Fluoranthene | 0.0537 | 0.0268 | n-Octadecane | 0.589 | 0.302 | Phenol | 3.65 | 1.08 | Pyridine | 0.370 | 0.182 | 2,4,6-Trichlorophenol | 0.155 | 0.106 |
---|
1 mg/L (ppm).
2 Within the range 6 to 9.
§ 437.46 - Pretreatment standards for existing sources (PSES).
(a) Except as provided in 40 CFR 403.7, § 403.13 or § 437.40(b), any new source subject to this subpart which combines treated or untreated wastes from subparts A, B, or C of this part may be subject to Multiple Wastestream Subcategory pretreatment standards representing the application of PSES set forth in paragraphs (b), (c), (d), or (e) of this section if the discharger agrees to the following conditions in its permit:
(1) The discharger will meet the applicable Multiple Wastestream
Subcategory standards set forth in paragraphs (b), (c), (d) or (e) of this section;
(2) The discharger will notify its local control authority of its desire to be subject to the Multiple Waste Subcategory by submitting to the local control authority an initial certification statement as described in § 437.41(a);
(3) The discharger will submit to its local control authority a periodic certification statement as described in § 437.41(b) once a year; and
(4) The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in § 437.41(c).
(b) Combined waste receipts from subparts A, B and C of this part. (1) As provided in § 437.46(a), and no later than [Insert date—three years after publication], any existing source subject to this paragraph must achieve the following pretreatment standards:
Pretreatment Standards (PSES)
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Antimony | 0.249 | 0.206 | Arsenic | 0.162 | 0.104 | Cadmium | 0.474 | 0.0962 | Chromium | 0.947 | 0.487 | Cobalt | 0.192 | 0.124 | Copper | 0.405 | 0.301 | Lead | 0.222 | 0.172 | Mercury | 0.00234 | 0.000739 | Nickel | 3.95 | 1.45 | Silver | 0.120 | 0.0351 | Tin | 0.409 | 0.120 | Titanium | 0.0947 | 0.0618 | Vanadium | 0.218 | 0.0662 | Zinc | 2.87 | 0.641 | Bis(2-ethylhexyl) phthalate | 0.267 | 0.158 | Carbazole | 0.392 | 0.233 | 1.92 | 0.561 | 0.698 | 0.205 | n-Decane | 5.79 | 3.31 | Fluoranthene | 0.787 | 0.393 | n-Octadecane | 1.22 | 0.925 | 2,4,6-Trichlorophenol | 0.155 | 0.106 |
---|
1 mg/L (ppm).
(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:
In-Plant Limitations
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Cyanide | 500 | 178 |
---|
1 mg/L (ppm).
(c) Combined waste receipts from subparts A and B of this part. (1) As provided in § 437.46(a), and no later than December 22, 2003, any existing source subject to this paragraph must achieve the following pretreatment standards:
Pretreatment Standards (PSES)
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Antimony | 0.249 | 0.206 | Arsenic | 0.162 | 0.104 | Cadmium | 0.474 | 0.0962 | Chromium | 0.947 | 0.487 | Cobalt | 0.192 | 0.124 | Copper | 0.405 | 0.301 | Lead | 0.222 | 0.172 | Mercury | 0.00234 | 0.000739 | Nickel | 3.95 | 1.45 | Silver | 0.120 | 0.0351 | Tin | 0.409 | 0.120 | Titanium | 0.0947 | 0.0618 | Vanadium | 0.218 | 0.0662 | Zinc | 2.87 | 0.641 | Bis(2-ethylhexyl) phthalate | 0.267 | 0.158 | Carbazole | 0.392 | 0.233 | n-Decane | 5.79 | 3.31 | Fluoranthene | 0.787 | 0.393 | n-Octadecane | 1.22 | 0.925 |
---|
1 mg/L (ppm).
(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:
In-Plant Limitations
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Cyanide | 500 | 178 |
---|
1 mg/L (ppm).
(d) Combined waste receipts from subparts A and C of this part. (1) As provided in § 437.46(a), and no later than December 22, 2003, any existing source subject to this paragraph must achieve the following pretreatment standards:
Pretreatment Standards (PSES)
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Antimony | 0.249 | 0.206 | Arsenic | 0.162 | 0.104 | Cadmium | 0.474 | 0.0962 | Chromium | 15.5 | 3.07 | Cobalt | 0.192 | 0.124 | Copper | 4.14 | 1.06 | Lead | 1.32 | 0.283 | Mercury | 0.00234 | 0.000739 | Nickel | 3.95 | 1.45 | Silver | 0.120 | 0.0351 | Tin | 0.409 | 0.120 | Titanium | 0.0947 | 0.0618 | Vanadium | 0.218 | 0.0662 | Zinc | 2.87 | 0.641 | 1.92 | 0.561 | 0.698 | 0.205 | 2,4,6-Trichlorophenol | 0.155 | 0.106 |
---|
1 mg/L (ppm).
(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:
In-Plant Limitations
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Cyanide | 500 | 178 |
---|
1 mg/L (ppm).
(e) Combined waste receipts from subparts B and C of this part. As provided in § 437.46(a), and no later than December 22, 2003, any existing source subject to this paragraph must achieve the following pretreatment standards:
Pretreatment Standards (PSES)
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Chromium | 0.947 | 0.487 | Cobalt | 56.4 | 18.8 | Copper | 0.405 | 0.301 | Lead | 0.222 | 0.172 | Tin | 0.249 | 0.146 | Zinc | 6.95 | 4.46 | Bis (2-ethylhexyl) phthalate | 0.267 | 0.158 | Carbazole | 0.392 | 0.233 | 1.92 | 0.561 | 0.698 | 0.205 | n-Decane | 5.79 | 3.31 | Fluoranthene | 0.787 | 0.393 | n-Octadecane | 1.22 | 0.925 | 2,4,6-Trichlorophenol | 0.155 | 0.106 |
---|
1 mg/L (ppm).
§ 437.47 - Pretreatment standards for new sources (PSNS).
(a) Except as provided in 40 CFR 403.7 or § 437.40(b), any new source subject to this subpart which combines treated or untreated wastes from subparts A, B, or C of this part may be subject to Multiple Wastestream Subcategory pretreatment standards representing the application of PSNS set forth in paragraphs (b), (c), (d), or (e) of this section if the discharger agrees to the following conditions in its permit:
(1) The discharger will meet the applicable Multiple Wastestream Subcategory standards set forth in paragraphs (b), (c), (d) or (e) of this section;
(2) The discharger will notify its local control authority at the time of submitting its application for an individual control mechanism or pretreatment agreement of its desire to be subject to Multiple Waste Subcategory by submitting to the local control authority an initial certification statement as described in § 437.41(a);
(3) The discharger will submit to its local control authority a periodic certification statements as described in § 437.41(b) once a year; and
(4) The discharger will maintain at the office of the facility and make available for inspection the on-site compliance paperwork as described in § 437.41(c).
(b) Combined waste receipts from subparts A, B and C of this part. (1) As provided in § 437.47(a), any new source subject to this paragraph must achieve the following pretreatment standards:
Pretreatment Standards (PSNS)
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Antimony | 0.249 | 0.206 | Arsenic | 0.162 | 0.104 | Cadmium | 0.474 | 0.0962 | Chromium | 0.746 | 0.323 | Cobalt | 0.192 | 0.124 | Copper | 0.500 | 0.242 | Lead | 0.350 | 0.160 | Mercury | 0.00234 | 0.000739 | Nickel | 3.95 | 1.45 | Silver | 0.120 | 0.0351 | Tin | 0.409 | 0.120 | Titanium | 0.0947 | 0.0618 | Vanadium | 0.218 | 0.0662 | Zinc | 2.87 | 0.641 | Bis(2-ethylhexyl) phthalate | 0.215 | 0.101 | Carbazole | 0.598 | 0.276 | 1.92 | 0.561 | 0.698 | 0.205 | n-Decane | 0.948 | 0.437 | Fluoranthene | 0.0537 | 0.0268 | n-Octadecane | 0.589 | 0.302 | 2,4,6-Trichlorophenol | 0.155 | 0.106 |
---|
1 mg/L (ppm).
(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:
In-Plant Limitations
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Cyanide | 500 | 178 |
---|
1 mg/L (ppm).
(c) Combined waste receipts from subparts A and B of this part. (1) As provided in § 437.47(a), any new source subject to this paragraph must achieve the following pretreatment standards:
Pretreatment Standards (PSNS)
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Antimony | 0.249 | 0.206 | Arsenic | 0.162 | 0.104 | Cadmium | 0.474 | 0.0962 | Chromium | 0.746 | 0.323 | Cobalt | 0.192 | 0.124 | Copper | 0.500 | 0.242 | Lead | 0.350 | 0.160 | Mercury | 0.00234 | 0.000739 | Nickel | 3.95 | 1.45 | Silver | 0.120 | 0.0351 | Tin | 0.409 | 0.120 | Titanium | 0.0947 | 0.0618 | Vanadium | 0.218 | 0.0662 | Zinc | 2.87 | 0.641 | Bis (2-ethylhexyl) phthalate | 0.215 | 0.101 | Carbazole | 0.598 | 0.276 | n-Decane | 0.948 | 0.437 | Fluoranthene | 0.0537 | 0.0268 | n-Octadecane | 0.589 | 0.302 |
---|
1 mg/L (ppm).
(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:
In-Plant Limitations
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Cyanide | 500 | 178 |
---|
1 mg/L (ppm).
(d) Combined waste receipts from subparts A and C of this part. (1) As provided in § 437.47(a), any new source subject to this paragraph must achieve the following pretreatment standards:
Pretreatment Standards (PSNS)
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Antimony | 0.249 | 0.206 | Arsenic | 0.162 | 0.104 | Cadmium | 0.474 | 0.0962 | Chromium | 15.5 | 3.07 | Cobalt | 0.192 | 0.124 | Copper | 4.14 | 1.06 | Lead | 1.32 | 0.283 | Mercury | 0.00234 | 0.000739 | Nickel | 3.95 | 1.45 | Silver | 0.120 | 0.0351 | Tin | 0.409 | 0.120 | Titanium | 0.0947 | 0.0618 | Vanadium | 0.218 | 0.0662 | Zinc | 2.87 | 0.641 | 1.92 | 0.561 | 0.698 | 0.205 | 2,4,6-Trichlorophenol | 0.155 | 0.106 |
---|
1 mg/L (ppm).
(2) The following in-plant limitations apply to metal-bearing wastewater containing cyanide:
In-Plant Limitations
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Cyanide | 500 | 178 |
---|
1 mg/L (ppm).
(e) Combined waste receipts from subparts B and C of this part. As provided in § 437.47(a), any new source subject to this paragraph must achieve the following pretreatment standards:
Pretreatment Standards (PSNS)
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | Chromium | 0.746 | 0.323 | Cobalt | 56.4 | 18.8 | Copper | 0.500 | 0.242 | Lead | 0.350 | 0.160 | Tin | 0.335 | 0.165 | Zinc | 8.26 | 4.50 | Bis(2-ethylhexyl) phthalate | 0.215 | 0.101 | Carbazole | 0.598 | 0.276 | 1.92 | 0.561 | 0.698 | 0.205 | n-Decane | 0.948 | 0.437 | Fluoranthene | 0.0537 | 0.0268 | n-Octadecane | 0.589 | 0.302 | 2,4,6-Trichlorophenol | 0.155 | 0.106 |
---|
1 mg/L (ppm).