Collapse to view only § 442.30 - Applicability.
- § 442.30 - Applicability.
- § 442.31 - Effluent limitations attainable by the application of the best practicable control technology currently available (BPT).
- § 442.32 - Effluent limitations attainable by the application of the best conventional pollutant control technology (BCT).
- § 442.33 - Effluent limitations attainable by the application of best available technology economically achievable (BAT).
- § 442.34 - New source performance standards (NSPS).
- § 442.35 - Pretreatment standards for existing sources (PSES).
- § 442.36 - Pretreatment standards for new sources (PSNS).
§ 442.30 - Applicability.
This subpart applies to discharges resulting from the cleaning of tank barges or ocean/sea tankers which have been used to transport chemical or petroleum cargos.
§ 442.31 - Effluent limitations attainable by the application of the best practicable control technology currently available (BPT).
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the application of BPT:
Table—Effluent Limitations
| Regulated parameter | Maximum daily 1 | Maximum monthly avg. 1 | BOD | 61 | 22 | TSS | 58 | 26 | Oil and grease (HEM) | 36 | 16 | Cadmium | 0.020 | Chromium | 0.42 | Copper | 0.10 | Lead | 0.14 | Mercury | 0.0013 | Nickel | 0.58 | Zinc | 8.3 | pH | ( 2) | ( 2) |
|---|
1 Mg/L (ppm).
2 Within 6 to 9 at all times.
§ 442.32 - Effluent limitations attainable by the application of the best conventional pollutant control technology (BCT).
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the application of BCT: Limitations for BOD
§ 442.33 - Effluent limitations attainable by the application of best available technology economically achievable (BAT).
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the application of BAT: Limitations for cadmium, chromium, copper, lead, mercury, nickel, and zinc are the same as the corresponding limitation specified in § 442.31.
§ 442.34 - New source performance standards (NSPS).
Any new point source subject to this subpart must achieve the following performance standards: Standards for BOD
§ 442.35 - Pretreatment standards for existing sources (PSES).
Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart must achieve the following pretreatment standards:
Table—Pretreatment Standards
| Regulated parameter | Maximum daily 1 | Non-polar material (SGT-HEM) | 26 | Cadmium | 0.020 | Chromium | 0.42 | Copper | 0.10 | Lead | 0.14 | Mercury | 0.0013 | Nickel | 0.58 | Zinc | 8.3 |
|---|
1 Mg/L (ppm).
§ 442.36 - Pretreatment standards for new sources (PSNS).
Except as provided in 40 CFR 403.7, any new source subject to this subpart must achieve the following pretreatment standards: Standards for non-polar materials (SGT-HEM), cadmium, chromium, copper, lead, mercury, nickel and zinc are the same as the corresponding standard specified in § 442.35.