1. Regulations
  2. title 40
  3. chapter I-i31
  4. part 465
  5. subpart A
  6. § 465.10

Collapse to view only § 465.10 - Applicability; description of the steel basis material subcategory.

§ 465.10 - Applicability; description of the steel basis material subcategory.

This subpart applies to discharges to waters of the United States, and introductions of pollutants into publicly owned treatment works from coil coating of steel basis material coils.

AUTHORITY: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 (b) and (c), and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e), and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217.

SOURCE: 47 FR 54244, Dec. 1, 1982, unless otherwise noted.

CITE AS: 40 CFR 465.10

§ 465.11 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available:

Subpart A

Pollutant or pollutant property BPT effluent limitations Maximum for any 1 day Maximum for monthly average mg/m 2 (pounds per 1 million ft 2) of area processed Chromium1.16(0.24)0.47(0.096) Cyanide0.80(0.17)0.33(0.068) Zinc3.66(0.75)1.54(0.32) Iron3.39(0.70)1.74(0.36) Oil and grease55.1(11.3)33.1(6.77) TSS113.0(23.1)55.1(11.3) pH( 1)( 1)( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

[47 FR 54244, Dec. 1, 1982; 49 FR 33648, Aug. 24, 1984]

AUTHORITY: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 (b) and (c), and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e), and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217.

SOURCE: 47 FR 54244, Dec. 1, 1982, unless otherwise noted.

CITE AS: 40 CFR 465.11

§ 465.12 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable:

Subpart A

Pollutant or pollutant property BAT effluent limitations Maximum for any 1 day Maximum for monthly average mg/m 2 (pounds per 1 million ft 2) of area processed Chromium0.50(0.10)0.20(0.041) Cyanide0.34(0.07)0.14(0.029) Zinc1.56(0.32)0.66(0.14) Iron1.45(0.30)0.74(0.15)
[47 FR 54244, Dec. 1, 1982; 49 FR 33648, Aug. 24, 1984]

AUTHORITY: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 (b) and (c), and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e), and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217.

SOURCE: 47 FR 54244, Dec. 1, 1982, unless otherwise noted.

CITE AS: 40 CFR 465.12

§ 465.13 - New source performance standards.

The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:

Subpart A

Pollutant or pollutant property NSPS Maximum for any 1 day Maximum for monthly average mg/m 2 (pounds per 1 million ft 2) of area processed Chromium0.12(0.024)0.047(0.01) Cyanide0.063(0.013)0.025(0.005) Zinc0.33(0.066)0.14(0.027) Iron0.39(0.086)0.20(0.041) Oil and grease3.16(0.65)3.16(0.65) TSS4.74(0.97)3.79(0.78) pH( 1)( 1)( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

[47 FR 54244, Dec. 1, 1982; 49 FR 33648, Aug. 24, 1984]

AUTHORITY: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 (b) and (c), and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e), and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217.

SOURCE: 47 FR 54244, Dec. 1, 1982, unless otherwise noted.

CITE AS: 40 CFR 465.13

§ 465.14 - Pretreatment standards for existing sources.

Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following retreatment standards for existing sources. The mass of wastewater pollutants in coil coating process wastewater introduced into a POTW shall not exceed the following values:

Subpart A

Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mg/m 2 (pound per 1 million ft 2) of area processed Chromium0.50(0.10)0.20(0.041) Cyanide0.34(0.07)0.14(0.029) Zinc1.56(0.32)0.66(0.14)
[47 FR 54244, Dec. 1, 1982; 49 FR 33648, Aug. 24, 1984]

AUTHORITY: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 (b) and (c), and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e), and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217.

SOURCE: 47 FR 54244, Dec. 1, 1982, unless otherwise noted.

CITE AS: 40 CFR 465.14

§ 465.15 - Pretreatment standards for new sources.

Except as provided in CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources. The mass of wastewater pollutants in coil coating process wastewater introduced into a POTW shall not exceed the following values:

Subpart A

Pollutant or pollutant property PSNS Maximum for any 1 day Maximum for monthly average mg/m 2 (pounds per 1 million ft 2) of area processed Chromium0.12(0.024)0.047(0.01) Cyanide0.063(0.013)0.025(0.005) Zinc0.33(0.066)0.14(0.027)
[47 FR 54244, Dec. 1, 1982; 49 FR 33648, Aug. 24, 1984]

AUTHORITY: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 (b) and (c), and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e), and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217.

SOURCE: 47 FR 54244, Dec. 1, 1982, unless otherwise noted.

CITE AS: 40 CFR 465.15