1. Regulations
  2. title 40
  3. chapter I-i31
  4. part 467
  5. subpart D
  6. § 467.44

Collapse to view only § 467.44 - New source performance standards.

§ 467.40 - Applicability; description of the forging subcategory.

This subpart applies to discharges of pollutants to waters of the United States and introductions of pollutants into publicly owned treatment works from the core of the forging subcategory and the ancillary operations.

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.40

§ 467.41 - Specialized definitions.

For the purpose of this subpart:

(a) The “core” of the forging subcategory shall include forging, artificial aging, annealing, degreasing, and sawing.

(b) The term “ancillary operation” shall mean any operation not previously included in the core, performed on-site, following or preceding the forging operation. The ancillary operations shall include forging air pollution scrubbers, solution heat treatment, and cleaning or etching.

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.41

§ 467.42 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. [Reserved]

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.42

§ 467.43 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. [Reserved]

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.43

§ 467.44 - New source performance standards.

Any new source subject to this subpart must achieve the following performance standards. The discharge of wastewater pollutants from the core shall not exceed the values set forth below:

Subpart D Core
Pollutant or pollutant property NSPS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum forged Chromium0.0190.008 Cyanide0.0100.004 Zinc0.0510.021 Aluminum0.3050.135 Oil and grease0.500.50 Suspended solids0.750.60 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart D Forging Scrubber Liquor
Pollutant or pollutant property NSPS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum forged Chromium0.0350.014 Cyanide0.0190.008 Zinc0.0960.04 Aluminum0.5760.256 Oil and grease0.9430.95 Suspended solids1.421.13 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart D Solution Heat Treatment Contact Cooling Water
Pollutant or pollutant property NSPS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum quenched Chromium0.760.31 Cyanide0.410.163 Zinc2.080.86 Aluminum12.455.52 Oil and grease20.3720.37 Suspended solids30.5624.45 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart D Cleaning or Etching Bath
Pollutant or pollutant property NSPS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.0660.027 Cyanide0.0360.015 Zinc0.1830.075 Aluminum1.0940.485 Oil and grease1.791.79 Suspended solids2.692.15 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart D Cleaning or Etching Rinse
Pollutant or pollutant property NSPS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.520.21 Cyanide0.280.11 Zinc1.420.59 Aluminum8.53.77 Oil and grease13.9113.91 Suspended solids20.8716.69 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart D Cleaning or Etching Scrubber Liquor
Pollutant or pollutant property NSPS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.720.29 Cyanide0.390.155 Zinc1.970.812 Aluminum11.815.24 Oil and grease19.3319.33 Suspended solids29.0023.20 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

[48 FR 49149, Oct. 24, 1983; 49 FR 11633, 11635, Mar. 27, 1984]

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.44

§ 467.45 - Pretreatment standards for existing sources.

Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduced pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources. The mass of wastewater pollutants in aluminum forming process wastewater introduced into a POTW shall not exceed the values set forth below:

Subpart D Core
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum forged Chromium0.0220.009 Cyanide0.0150.006 Zinc0.0730.031 TTO0.035Oil and grease (alternate monitoring parameter)2.61.3
Subpart D Forging Scrubber Liquor
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum forged Chromium0.0420.017 Cyanide0.0280.011 Zinc0.140.058 TTO0.065Oil and grease (alternate monitoring parameter)4.92.5
Subpart D Solution Heat Treatment Contact Cooling Water
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum quenched Chromium0.8970.37 Cyanide0.5910.25 Zinc2.981.24 TTO1.41Oil and grease (alternate monitoring parameter)11053
Subpart D Cleaning or Etching Bath
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.0790.032 Cyanide0.0520.022 Zinc0.260.11 TTO0.123Oil and grease (alternate monitoring parameter)9.34.7
Subpart D Cleaning or Etching Rinse
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mb/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium1.70.7 Cyanide1.20.5 Zinc5.72.4 TTO2.7Oil and grease (alternate monitoring parameter)200100
Subpart D Cleaning or Etching Scrubber Liquor
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.8510.35 Cyanide0.5610.23 Zinc2.821.18 TTO1.34Oil and grease (alternate monitoring parameter)10050
[48 FR 49149, Oct. 24, 1983; 49 FR 11632, 11633, 11635, Mar. 27, 1984, as amended at 53 FR 52369, Dec. 27, 1988]

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.45

§ 467.46 - Pretreatment standards for new sources.

Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources. The mass of wastewater pollutants in aluminum forming process wastewater introduced into a POTW shall not exceed the values set forth below:

Subpart D Core
Pollutant or pollutant property PSNS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum forged Chromium0.0190.008 Cyanide0.0100.004 Zinc0.0510.021 TTO0.035Oil and grease (alternate monitoring parameter)0.500.50
Subpart D Forging Scrubber Liquor
Pollutant or pollutant property PSNS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum forged Chromium0.0350.014 Cyanide0.0190.008 Zinc0.0960.040 TTO0.065Oil and grease (alternate monitoring parameter)0.950.95
Subpart D Solution Heat Treatment Contact Cooling Water
Pollutant or pollutant property PSNS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum quenched Chromium0.760.31 Cyanide0.410.16 Zinc2.080.86 TTO1.41Oil and grease (alternate monitoring parameter)20.3720.37
Subpart D Cleaning or Etching Bath
Pollutant or pollutant property PSNS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.0670.027 Cyanide0.0360.015 Zinc0.1830.075 TTO0.124Oil and grease (alternate monitoring parameter)1.791.79
Subpart D Cleaning or Etching Rinse
Pollutant or pollutant property PSNS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.520.21 Cyanide0.280.11 Zinc1.420.59 TTO0.96Oil and grease (alternate monitoring parameter)13.9113.91
Subpart D Cleaning or Etching Scrubber Liquor
Pollutant or pollutant property PSNS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.720.29 Cyanide0.390.16 Zinc1.970.812 TTO1.34Oil and grease (alternate monitoring parameter)19.3319.33
[48 FR 49149, Oct. 24, 1983; 49 FR 11632, 11633, Mar. 27, 1984]

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.46

§ 467.47 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. [Reserved]

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.47