- § 471.40 - Applicability; description of the precious metals forming subcategory.
- § 471.41 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).
- § 471.42 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).
- § 471.43 - New source performance standards (NSPS).
- § 471.44 - Pretreatment standards for existing sources (PSES).
- § 471.45 - Pretreatment standards for new sources (PSNS).
- § 471.46 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT). [Reserved]
§ 471.40 - Applicability; description of the precious metals forming subcategory.
This subpart applies to discharges of pollutants to waters of the United States, and introductions of pollutants into publicly owned treatment works from the process operations of the precious metals forming subcategory.
§ 471.41 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations for the process operations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):
(a) Rolling spent neat oils—subpart D—BPT. There shall be no discharge of process wastewater pollutants.
(b) Rolling spent emulsions.
Subpart D—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals rolled with emulsions | Chromium | 0.026 | 0.012 | Copper | 0.147 | 0.077 | Cyanide | 0.023 | 0.010 | Silver | 0.032 | 0.013 | Oil and grease | 1.54 | 0.925 | TSS | 3.16 | 1.51 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(c) Drawing spent neat oils—subpart D—BPT. There shall be no discharge of process wastewater pollutants.
(d) Drawing spent emulsions.
Subpart D—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals drawn with emulsions | Cadmium | 0.016 | 0.007 | Copper | 0.091 | 0.048 | Cyanide | 0.014 | 0.006 | Silver | 0.020 | 0.008 | Oil and grease | 0.950 | 0.570 | TSS | 1.95 | 0.926 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(e) Drawing spent soap solutions.
Subpart D—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals drawn with soap solutions | Cadmium | 0.001 | 0.0005 | Copper | 0.006 | 0.003 | Cyanide | 0.0009 | 0.0004 | Silver | 0.001 | 0.0006 | Oil and grease | 0.063 | 0.038 | TSS | 0.128 | 0.061 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(f) Metal powder production wet atomization wastewater.
Subpart D—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals powder wet atomized | Cadmium | 2.27 | 1.00 | Copper | 12.7 | 6.70 | Cyanide | 1.94 | 0.802 | Silver | 2.70 | 1.14 | Oil and grease | 134 | 80.2 | TSS | 274 | 130 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(g) Heat treatment contact cooling water.
Subpart D—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of extruded precious metals heat treated | Cadmium | 1.42 | 0.626 | Copper | 7.93 | 4.17 | Cyanide | 1.21 | 0.501 | Silver | 1.71 | 0.709 | Oil and grease | 83.4 | 50.1 | TSS | 171 | 81.3 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(h) Semi-continuous or continuous casting contact cooling water.
Subpart D—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals cast by the semi-continuous or continuous method | Cadmium | 3.50 | 1.55 | Copper | 19.6 | 10.3 | Cyanide | 2.99 | 1.24 | Silver | 4.23 | 1.75 | Oil and grease | 206 | 124 | TSS | 423 | 209 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(i) Stationary casting contact cooling water—subpart D—BPT. There shall be no discharge of process wastewater pollutants.
(j) Direct chill casting contact cooling water.
Subpart D—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals cast by the direct chill method | Cadmium | 3.67 | 1.62 | Copper | 20.5 | 10.8 | Cyanide | 3.13 | 1.30 | Silver | 4.43 | 1.84 | Oil and grease | 216 | 130 | TSS | 443 | 211 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(k) Shot casting contact cooling water.
Subpart D—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals shot cast | Cadmium | 1.25 | 0.551 | Copper | 6.98 | 3.67 | Cyanide | 1.07 | 0.441 | Silver | 1.51 | 0.624 | Oil and grease | 73.4 | 44.1 | TSS | 151 | 71.6 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(l) Wet air pollution control scrubber blowdown—subpart D—BPT. There shall be no discharge of process wastewater pollutants.
(m) Pressure bonding contact cooling water.
Subpart D—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals and base metal pressure bonded | Cadmium | 0.029 | 0.013 | Copper | 0.159 | 0.084 | Cyanide | 0.024 | 0.010 | Silver | 0.034 | 0.014 | Oil and grease | 1.67 | 1.00 | TSS | 3.43 | 1.63 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(n) Surface treatment spent baths.
Subpart D—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals surface treated | Cadmium | 0.033 | 0.015 | Copper | 0.183 | 0.097 | Cyanide | 0.028 | 0.012 | Silver | 0.040 | 0.017 | Oil and grease | 1.93 | 1.16 | TSS | 3.95 | 1.88 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(o) Surface treatment rinse.
Subpart D—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals surface treated | Cadmium | 2.10 | 0.924 | Copper | 11.7 | 5.16 | Cyanide | 1.79 | 0.739 | Silver | 2.53 | 1.05 | Oil and grease | 123 | 73.9 | TSS | 253 | 120 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(p) Alkaline cleaning spent baths.
Subpart D—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals alkaline cleaned | Cadmium | 0.021 | 0.009 | Copper | 0.114 | 0.060 | Cyanide | 0.018 | 0.007 | Silver | 0.025 | 0.010 | Oil and grease | 1.20 | 0.720 | TSS | 2.46 | 1.170 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(q) Alkaline cleaning rinse.
Subpart D—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals alkaline cleaned | Cadmium | 3.81 | 1.68 | Copper | 21.3 | 11.2 | Cyanide | 3.25 | 1.35 | Silver | 4.59 | 1.91 | Oil and grease | 224 | 135 | TSS | 459 | 219 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(r) Alkaline cleaning prebonding wastewater.
Subpart D—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals and base metal cleaned prior to bonding | Cadmium | 3.95 | 1.74 | Copper | 22.1 | 11.6 | Cyanide | 3.37 | 1.39 | Silver | 4.76 | 1.97 | Oil and grease | 232 | 139 | TSS | 476 | 226 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(s) Tumbling or burnishing wastewater.
Subpart D—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals tumbled or burnished | Cadmium | 4.12 | 1.82 | Copper | 23.0 | 12.1 | Cyanide | 3.51 | 1.45 | Silver | 4.96 | 2.06 | Oil and grease | 242 | 145 | TSS | 496 | 236 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(t) Sawing or grinding spent neat oils—subpart D—BPT. There shall be no discharge of process wastewater pollutants.
(u) Sawing or grinding spent emulsions.
Subpart D—BPT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals sawed or ground with emulsions | Cadmium | 0.032 | 0.014 | Copper | 0.178 | 0.094 | Cyanide | 0.027 | 0.011 | Silver | 0.039 | 0.016 | Oil and grease | 1.87 | 1.12 | TSS | 3.83 | 1.82 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(v) Degreasing spent solvents—subpart D—BPT. There shall be no discharge of process wastewater pollutants.
§ 471.42 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT):
(a) Rolling spent neat oils—subpart D—BAT. There shall be no discharge of wastewater pollutants.
(b) Rolling spent emulsions.
Subpart D—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals rolled with emulsions | Cadmium | 0.026 | 0.012 | Copper | 0.147 | 0.077 | Cyanide | 0.023 | 0.010 | Silver | 0.032 | 0.013 |
---|
(c) Drawing spent neat oils—subpart D—BAT. There shall be no discharge of process wastewater pollutants.
(d) Drawing spent emulsions.
Subpart D—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals drawn with emulsions | Cadmium | 0.016 | 0.007 | Copper | 0.091 | 0.048 | Cyanide | 0.014 | 0.006 | Silver | 0.020 | 0.008 |
---|
(e) Drawing spent soap solutions.
Subpart D—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals drawn with soap solutions | Cadmium | 0.001 | 0.0005 | Copper | 0.006 | 0.003 | Cyanide | 0.0009 | 0.0004 | Silver | 0.002 | 0.0006 |
---|
(f) Metal powder production wet atomization wastewater.
Subpart D—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals powder wet atomized | Cadmium | 2.27 | 1.00 | Copper | 12.7 | 6.68 | Cyanide | 1.94 | 0.802 | Silver | 2.74 | 1.14 |
---|
(g) Heat treatment contact cooling water.
Subpart D—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals heat treated | Cadmium | 0.142 | 0.063 | Copper | 0.793 | 0.417 | Cyanide | 0.121 | 0.050 | Silver | 0.171 | 0.071 |
---|
(h) Semi-continuous and continuous casting contact cooling water.
Subpart D—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals cast by the semi-continuous or continuous method | Cadmium | 0.350 | 0.155 | Copper | 1.96 | 1.03 | Cyanide | 0.299 | 0.124 | Silver | 0.423 | 0.175 |
---|
(i) Stationary casting contact cooling water—subpart D—BAT. There shall be no discharge of process wastewater pollutants.
(j) Direct chill casting contact cooling water.
Subpart D—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals cast by the direct chill method | Cadmium | 0.3676 | 0.162 | Copper | 2.05 | 1.08 | Cyanide | 0.313 | 0.130 | Silver | 0.443 | 0.184 |
---|
(k) Shot casting contact cooling water.
Subpart D—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals shot cast | Cadmium | 0.125 | 0.055 | Copper | 0.698 | 0.367 | Cyanide | 0.107 | 0.044 | Silver | 0.151 | 0.063 |
---|
(l) Wet air pollution control scrubber blowdown—subpart D—BAT. There shall be no discharge of process wastewater pollutants.
(m) Pressure bonding contact cooling water.
Subpart D—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metal and base metal pressure bonded | Cadmium | 0.0297 | 0.013 | Copper | 0.159 | 0.084 | Cyanide | 0.0247 | 0.010 | Silver | 0.0342 | 0.014 |
---|
(n) Surface treatment spent baths.
Subpart D—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals surface treated | Cadmium | 0.033 | 0.015 | Copper | 0.183 | 0.097 | Cyanide | 0.028 | 0.012 | Silver | 0.040 | 0.017 |
---|
(o) Surface treatment rinse.
Subpart D—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals surface treated | Cadmium | 0.210 | 0.093 | Copper | 1.17 | 0.616 | Cyanide | 0.179 | 0.074 | Silver | 0.253 | 0.105 |
---|
(p) Alkaline cleaning spent baths.
Subpart D—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals alkaline cleaned | Cadmium | 0.021 | 0.009 | Copper | 0.114 | 0.060 | Cyanide | 0.018 | 0.007 | Silver | 0.025 | 0.010 |
---|
(q) Alkaline cleaning rinse.
Subpart D—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals alkaline cleaned | Cadmium | 0.381 | 0.168 | Copper | 2.13 | 1.12 | Cyanide | 0.325 | 0.135 | Silver | 0.459 | 0.191 |
---|
(r) Alkaline cleaning prebonding wastewater.
Subpart D—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metal and base metal cleaned prior to bonding | Cadmium | 0.400 | 0.174 | Copper | 2.210 | 1.16 | Cyanide | 0.337 | 0.139 | Silver | 0.476 | 0.197 |
---|
(s) Tumbling or burnishing wastewater.
Subpart D—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals tumbled or burnished | Cadmium | 0.412 | 0.182 | Copper | 2.300 | 1.21 | Cyanide | 0.351 | 0.145 | Silver | 0.496 | 0.206 |
---|
(t) Sawing or grinding spent neat oils—subpart D—BAT. There shall be no discharge of process wastewater pollutants.
(u) Sawing or grinding spent emulsions.
Subpart D—BAT
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals sawed or ground with emulsions | Cadmium | 0.0327 | 0.014 | Copper | 0.178 | 0.094 | Cyanide | 0.0277 | 0.011 | Silver | 0.0381 | 0.016 |
---|
(v) Degreasing spent solvents—subpart D—BAT. There shall be no discharge of process wastewater pollutants.
§ 471.43 - New source performance standards (NSPS).
Any new source subject to this subpart must achieve the following new source performance standards (NSPS):
(a) Rolling Spent Neat Oils—subpart D—NSPS. There shall be no discharge of process wastewater pollutants.
(b) Rolling spent emulsions.
Subpart D—NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals rolled with emulsions | Cadmium | 0.026 | 0.012 | Copper | 0.147 | 0.077 | Cyanide | 0.023 | 0.010 | Silver | 0.032 | 0.013 | Oil and grease | 1.54 | 0.925 | TSS | 3.16 | 1.51 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(c) Drawing spent neat oils—subpart D—NSPS. There shall be no discharge of process wastewater pollutants.
(d) Drawing spent emulsions.
Subpart D—NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals drawn with emulsions | Cadmium | 0.017 | 0.007 | Copper | 0.091 | 0.048 | Cyanide | 0.014 | 0.006 | Silver | 0.020 | 0.008 | Oil and grease | 0.950 | 0.570 | TSS | 1.95 | 0.927 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(e) Drawing spent soap solutions.
Subpart D—NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals drawn with soap solutions | Cadmium | 0.001 | 0.0005 | Copper | 0.006 | 0.003 | Cyanide | 0.0009 | 0.0004 | Silver | 0.002 | 0.0006 | Oil and grease | 0.063 | 0.038 | TSS | 0.128 | 0.061 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(f) Metal powder production atomization wastewater.
Subpart D—NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals powder wet atomized | Cadmium | 2.27 | 1.00 | Copper | 12.7 | 6.68 | Cyanide | 1.94 | 0.802 | Silver | 2.74 | 1.14 | Oil and grease | 134 | 80.2 | TSS | 274 | 131 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(g) Heat treatment contact cooling water.
Subpart D—NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals heat treated | Cadmium | 0.142 | 0.063 | Copper | 0.793 | 0.417 | Cyanide | 0.121 | 0.050 | Silver | 0.171 | 0.071 | Oil and grease | 8.34 | 5.01 | TSS | 17.1 | 8.13 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(h) Semi-continuous and continuous casting contact cooling water.
Subpart D—NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals cast by the semi-continuous or continuous method | Cadmium | 0.350 | 0.155 | Copper | 1.96 | 1.03 | Cyanide | 0.299 | 0.124 | Silver | 0.423 | 0.175 | Oil and grease | 20.6 | 12.4 | TSS | 42.3 | 20.1 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(i) Stationary casting contact cooling water—subpart D—NSPS. There shall be no discharge of process wastewater pollutants.
(j) Direct chill casting contact cooling water.
Subpart D—NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals cast by the direct chill method | Cadmium | 0.367 | 0.162 | Copper | 2.05 | 1.08 | Cyanide | 0.313 | 0.130 | Silver | 0.443 | 0.184 | Oil and grease | 21.6 | 13.0 | TSS | 44.3 | 21.1 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(k) Shot casting contact cooling water.
Subpart D—NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals shot cast | Cadmium | 0.125 | 0.055 | Copper | 0.698 | 0.367 | Cyanide | 0.107 | 0.044 | Silver | 0.151 | 0.063 | Oil and grease | 7.34 | 4.41 | TSS | 15.1 | 7.16 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(l) Wet air pollution control scrubber blowdown—subpart D—NSPS. There shall be no discharge of process wastewater pollutants.
(m) Pressure bonding contact cooling water.
Subpart D—NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals and base metal pressure bonded | Cadmium | 0.029 | 0.013 | Copper | 0.159 | 0.084 | Cyanide | 0.024 | 0.010 | Silver | 0.034 | 0.014 | Oil and grease | 1.67 | 1.00 | TSS | 3.43 | 1.63 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(n) Surface treatment spent baths.
Subpart D—NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals surface treated | Cadmium | 0.033 | 0.015 | Copper | 0.183 | 0.097 | Cyanide | 0.028 | 0.012 | Silver | 0.040 | 0.017 | Oil and grease | 1.93 | 1.16 | TSS | 3.95 | 1.88 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(o) Surface treatment rinse.
Subpart D—NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals surface treated | Cadmium | 0.210 | 0.093 | Copper | 1.17 | 0.616 | Cyanide | 0.179 | 0.074 | Silver | 0.253 | 0.105 | Oil and grease | 12.3 | 7.39 | TSS | 25.3 | 12.0 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(p) Alkaline cleaning spent baths.
Subpart D—NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals alkaline cleaned | Cadmium | 0.021 | 0.009 | Copper | 0.114 | 0.060 | Cyanide | 0.018 | 0.007 | Silver | 0.025 | 0.010 | Oil and grease | 1.20 | 0.720 | TSS | 2.46 | 1.17 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(q) Alkaline cleaning rinse.
Subpart D—NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals alkaline cleaned | Cadmium | 0.381 | 0.168 | Copper | 2.13 | 1.112 | Cyanide | 0.325 | 0.135 | Silver | 0.459 | 0.191 | Oil and grease | 22.4 | 13.5 | TSS | 45.9 | 21.9 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(r) Alkaline cleaning pre-bonding wastewater.
Subpart D—NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals and base metal cleaned prior to bonding | Cadmium | 0.400 | 0.174 | Copper | 2.21 | 1.16 | Cyanide | 0.337 | 0.139 | Silver | 0.476 | 0.197 | Oil and grease | 23.2 | 13.9 | TSS | 47.6 | 22.6 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(s) Tumbling or burnishing wastewater.
Subpart D—NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals tumbled or burnished | Cadmium | 0.412 | 0.182 | Copper | 2.30 | 1.21 | Cyanide | 0.351 | 0.145 | Silver | 0.496 | 0.206 | Oil and grease | 24.2 | 14.5 | TSS | 49.6 | 23.6 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(t) Sawing or grinding spent neat oils—subpart D—NSPS. There shall be no discharge of process wastewater pollutants.
(u) Sawing or grinding spent emulsions.
Subpart D—NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals sawed or ground with emulsions | Cadmium | 0.032 | 0.014 | Copper | 0.178 | 0.094 | Cyanide | 0.027 | 0.011 | Silver | 0.038 | 0.016 | Oil and grease | 1.87 | 1.12 | TSS | 3.83 | 1.82 | pH | ( 1) | ( 1) |
---|
1 Within the range of 7.5 to 10.0 at all times.
(v) Degreasing spent solvents—subpart D—NSPS. There shall be no discharge of process wastewater pollutants.
§ 471.44 - Pretreatment standards for existing sources (PSES).
Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and by August 23, 1985 achieve the following pretreatment standards for existing sources (PSES). The mass of wastewater pollutants in precious metals forming process wastewater introduced into a POTW shall not exceed the following values:
(a) Rolling spent neat oils—subpart D—PSES. There shall be no discharge of process wastewater pollutants.
(b) Rolling spent emulsions.
Subpart D—PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals rolled with emulsions | Cadmium | 0.026 | 0.012 | Copper | 0.147 | 0.077 | Cyanide | 0.023 | 0.010 | Silver | 0.032 | 0.013 |
---|
(c) Drawing spent neat oils—subpart D—PSES. There shall be no discharge of process wastewater pollutants.
(d) Drawing spent emulsions.
Subpart D—PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals drawn with emulsions | Cadmium | 0.016 | 0.007 | Copper | 0.091 | 0.048 | Cyanide | 0.014 | 0.006 | Silver | 0.020 | 0.008 |
---|
(e) Drawing spent soap solutions.
Subpart D—PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals drawn with soap solutions | Cadmium | 0.001 | 0.0005 | Copper | 0.006 | 0.003 | Cyanide | 0.0009 | 0.0004 | Silver | 0.002 | 0.0006 |
---|
(f) Metal powder production atomization wastewater.
Subpart D—PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals powder wet atomized | Cadmium | 2.27 | 1.00 | Copper | 12.7 | 6.68 | Cyanide | 1.94 | 0.802 | Silver | 2.74 | 1.14 |
---|
(g) Heat treatment contact cooling water.
Subpart D—PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals heat treated | Cadmium | 0.142 | 0.063 | Copper | 0.793 | 0.417 | Cyanide | 0.121 | 0.050 | Silver | 0.171 | 0.071 |
---|
(h) Semi-continuous and continuous casting contact cooling water.
Subpart D—PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals cast by the semi-continuous or continuous method | Cadmium | 0.350 | 0.155 | Copper | 1.96 | 1.03 | Cyanide | 0.299 | 0.124 | Silver | 0.423 | 0.175 |
---|
(i) Stationary casting contact cooling water—subpart D—PSES. There shall be no discharge of process wastewater pollutants.
(j) Direct chill casting contact cooling water.
Subpart D—PSES
Pollutant or pollutant property | Maximum for any one day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals cast by the direct chill method | Cadmium | 0.367 | 0.162 | Copper | 2.05 | 1.08 | Cyanide | 0.313 | 0.130 | Silver | 0.443 | 0.184 |
---|
(k) Shot casting contact cooling water.
Subpart D—PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals shot cast | Cadmium | 0.125 | 0.055 | Copper | 0.698 | 0.367 | Cyanide | 0.107 | 0.044 | Silver | 0.151 | 0.063 |
---|
(l) Wet air pollution control scrubber blowdown—subpart D—PSES. There shall be no discharge of process wastewater pollutants.
(m) Pressure bonding contact cooling water.
Subpart D—PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metal and base metal pressure bonded | Cadmium | 0.029 | 0.013 | Copper | 0.159 | 0.084 | Cyanide | 0.024 | 0.010 | Silver | 0.034 | 0.014 |
---|
(n) Surface treatment spent baths.
Subpart D—PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals surface treated | Cadmium | 0.033 | 0.015 | Copper | 0.183 | 0.097 | Cyanide | 0.028 | 0.012 | Silver | 0.040 | 0.017 |
---|
(o) Surface treatment rinse.
Subpart D—PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals surface treated | Cadmium | 0.210 | 0.093 | Copper | 1.17 | 0.616 | Cyanide | 0.179 | 0.074 | Silver | 0.253 | 0.105 |
---|
(p) Alkaline cleaning spent baths.
Subpart D—PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals alkaline cleaned | Cadmium | 0.021 | 0.009 | Copper | 0.114 | 0.060 | Cyanide | 0.018 | 0.007 | Silver | 0.025 | 0.010 |
---|
(q) Alkaline cleaning rinse.
Subpart D—PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals alkaline cleaned | Cadmium | 0.381 | 0.168 | Copper | 2.13 | 1.12 | Cyanide | 0.325 | 0.135 | Silver | 0.459 | 0.191 |
---|
(r) Alkaline cleaning prebonding wastewater.
Subpart D—PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals and base metal cleaned prior to bonding | Cadmium | 0.400 | 0.174 | Copper | 2.210 | 1.16 | Cyanide | 0.337 | 0.139 | Silver | 0.476 | 0.197 |
---|
(s) Tumbling or burnishing wastewater.
Subpart D—PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals tumbled or burnished | Cadmium | 0.412 | 0.182 | Copper | 2.300 | 1.21 | Cyanide | 0.351 | 0.145 | Silver | 0.496 | 0.206 |
---|
(t) Sawing or grinding spent neat oils—subpart D—PSES. There shall be no discharge of process wastewater pollutants.
(u) Sawing or grinding spent emulsions.
Subpart D—PSES
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals sawed or ground with emulsions | Cadmium | 0.032 | 0.014 | Copper | 0.178 | 0.094 | Cyanide | 0.027 | 0.011 | Silver | 0.038 | 0.016 |
---|
(v) Degreasing spent solvents—subpart D—PSNS. There shall be no discharge of process wastewater pollutants.
§ 471.45 - Pretreatment standards for new sources (PSNS).
Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources (PSNS). The mass of wastewater pollutants in precious metals forming wastewater introduced into a POTW shall not exceed the following values:
(a) Rolling spent neat oils—subpart D—PSNS. There shall be no discharge of process wastewater pollutants.
(b) Rolling spent emulsions.
Subpart D—PSNS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals rolled with emulsions | Cadmium | 0.026 | 0.012 | Copper | 0.147 | 0.077 | Cyanide | 0.023 | 0.010 | Silver | 0.032 | 0.013 |
---|
(c) Drawing spent neat oils—subpart D—PSNS. There shall be no discharge of process wastewater pollutants.
(d) Drawing spent emulsions.
Subpart D—PSNS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals drawn with emulsions | Cadmium | 0.016 | 0.007 | Copper | 0.091 | 0.048 | Cyanide | 0.014 | 0.006 | Silver | 0.020 | 0.008 |
---|
(e) Drawing spent soap solutions.
Subpart D—PSNS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals drawn with soap solutions | Cadmium | 0.001 | 0.0005 | Copper | 0.006 | 0.003 | Cyanide | 0.0009 | 0.0004 | Silver | 0.002 | 0.0006 |
---|
(f) Metal powder production wet atomization wastewater.
Subpart D—PSNS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals powder wet atomized | Cadmium | 2.27 | 1.00 | Copper | 12.7 | 6.68 | Cyanide | 1.94 | 0.802 | Silver | 2.74 | 1.14 |
---|
(g) Heat treatment contact cooling water.
Subpart D—PSNS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of extended precious metals heat treated | Cadmium | 0.142 | 0.063 | Copper | 0.793 | 0.417 | Cyanide | 0.121 | 0.050 | Silver | 0.171 | 0.071 |
---|
(h) Semi-continuous and continuous casting contact cooling water.
Subpart D—PSNS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals cast by the semi-continuous or continuous method | Cadmium | 0.350 | 0.155 | Copper | 1.96 | 1.03 | Cyanide | 0.299 | 0.124 | Silver | 0.423 | 0.175 |
---|
(i) Stationary casting contact cooling water—subpart D—PSNS. There shall be no discharge of process wastewater pollutants.
(j) Direct chill casting contact cooling water.
Subpart D—PSNS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals cast by the direct chill method | Cadmium | 0.367 | 0.162 | Copper | 2.05 | 1.08 | Cyanide | 0.313 | 0.130 | Silver | 0.443 | 0.184 |
---|
(k) Shot casting contact cooling water.
Subpart D—PSNS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals shot cast | Cadmium | 0.125 | 0.055 | Copper | 0.698 | 0.367 | Cyanide | 0.107 | 0.044 | Silver | 0.151 | 0.0631 |
---|
(l) Wet air pollution control scrubber blowdown—subpart D—PSNS. There shall be no discharge of process wastewater pollutants.
(m) Pressure bonding contact cooling water.
Subpart D—PSNS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals and base metal pressure bonded | Cadmium | 0.029 | 0.013 | Copper | 0.159 | 0.084 | Cyanide | 0.024 | 0.010 | Silver | 0.034 | 0.014 |
---|
(n) Surface treatment spent baths.
Subpart D—PSNS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals surface treated | Cadmium | 0.033 | 0.015 | Copper | 0.183 | 0.097 | Cyanide | 0.028 | 0.012 | Silver | 0.040 | 0.017 |
---|
(o) Surface treatment rinse.
Subpart D—PSNS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals surface treated | Cadmium | 0.210 | 0.093 | Copper | 1.17 | 0.616 | Cyanide | 0.179 | 0.074 | Silver | 0.253 | 0.105 |
---|
(p) Alkaline cleaning spent baths.
Subpart D—PSNS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals alkaline cleaned | Cadmium | 0.021 | 0.009 | Copper | 0.114 | 0.060 | Cyanide | 0.018 | 0.007 | Silver | 0.025 | 0.010 |
---|
(q) Alkaline cleaning rinse.
Subpart D—PSNS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals alkaline cleaned | Cadmium | 0.381 | 0.168 | Copper | 2.13 | 1.12 | Cyanide | 0.325 | 0.135 | Silver | 0.459 | 0.191 |
---|
(r) Alkaline cleaning pre-bonding wastewater.
Subpart D—PSNS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals and base metal cleaned prior to bonding | Cadmium | 0.400 | 0.174 | Copper | 2.21 | 1.16 | Cyanide | 0.337 | 0.139 | Silver | 0.476 | 0.197 |
---|
(s) Tumbling or burnishing wastewater.
Subpart D—PSNS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals tumbled or burnished | Cadmium | 0.412 | 0.182 | Copper | 2.30 | 1.21 | Cyanide | 0.351 | 0.145 | Silver | 0.496 | 0.206 |
---|
(t) Sawing or grinding spent neat oils—subpart D—PSNS. There shall be no discharge of process wastewater pollutants.
(u) Sawing or grinding spent emulsions.
Subpart D—PSNS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of precious metals sawed or ground with emulsions | Cadmium | 0.032 | 0.014 | Copper | 0.178 | 0.094 | Cyanide | 0.027 | 0.011 | Silver | 0.038 | 0.016 |
---|
(v) Degreasing spent solvents—subpart D—PSNS. There shall be no discharge of process wastewater pollutants.