Collapse to view only § 62.3140 - Identification of plan—negative declaration.
Fluoride Emissions From Existing Primary Aluminum Plants
Metals, Acid Gases, Organic Compounds, Particulates and Nitrogen Oxide Emissions From Existing Hospital/Medical/Infectious Waste Incinerators
Control of Non-Methane Organic Compounds Emissions From Existing Municipal Solid Waste Landfills
Emissions From Existing Municipal Waste Combustors With the Capacity To Burn Greater Than 250 Tons Per Day of Municipal Solid Waste
Emissions From Existing Sewage Sludge Incineration Units
Emissions From Existing Commercial Industrial Solid Waste Incinerators
Fluoride Emissions From Existing Primary Aluminum Plants
§ 62.3100 - Identification of plan—negative declaration.
The State of Idaho Department of Health and Welfare submitted on February 23, 1981, certification that there are no existing primary aluminum plants in the State subject to part 60, subpart B of this chapter.
Metals, Acid Gases, Organic Compounds, Particulates and Nitrogen Oxide Emissions From Existing Hospital/Medical/Infectious Waste Incinerators
§ 62.3110 - Identification of plan.
(a) The Idaho Division of Environmental Quality submitted to the Environmental Protection Agency a State Plan for the control of air emissions from Hospital/Medical/Infectious Waste Incinerators on December 16, 1999.
(b) Identification of Sources: The Idaho State Plan applies to all existing HMIWI facilities for which construction was commenced on or before June 20, 1996, as described in 40 CFR part 60, subpart Ce. (This plan does not apply to facilities on tribal lands).
(c) The effective date for the portion of the plan applicable to existing Hospital/Medical/Infectious Waste Incinerators is June 20, 2000.
Control of Non-Methane Organic Compounds Emissions From Existing Municipal Solid Waste Landfills
§ 62.3120 - Identification of plan.
(a) The Idaho Division of Environmental Quality submitted to the Environmental Protection Agency a State Plan for the control of air emissions from Municipal Solid Waste Landfills on December 16, 1999.
(b) Identification of Sources: The Idaho State Plan applies to all existing Municipal Solid Waste Landfills which commenced construction, reconstruction, or modification before May 30, 1991, as described in 40 CFR part 60, subpart Cc. (This plan does not apply to facilities on tribal lands).
(c) The effective date for the portion of the plan applicable to existing Municipal Solid Waste Landfills is May 30, 2000.
Emissions From Existing Municipal Waste Combustors With the Capacity To Burn Greater Than 250 Tons Per Day of Municipal Solid Waste
§ 62.3130 - Identification of plan—negative declaration.
Letter from the Department of Health and Welfare submitted October 28, 1996 certifying that there are no existing municipal waste combustor units in the State of Idaho that are subject to part 60, subpart Cb, of this chapter.
Emissions From Existing Sewage Sludge Incineration Units
§ 62.3140 - Identification of plan—negative declaration.
Letter from the Idaho Department of Environmental Quality, submitted on March 11, 2013, certifying that there are no existing sewage sludge incineration units subject to 40 CFR part 60, subpart MMMM operating within its jurisdiction.
Emissions From Existing Commercial Industrial Solid Waste Incinerators
§ 62.3150 - Identification of plan—negative declaration.
Letter from the Idaho Department of Environmental Quality, submitted on April 14, 2014, certifying that there are no existing commercial industrial solid waste incineration units subject to 40 CFR part 60, subpart DDDD operating within its jurisdiction.