(a) Definition. Contracting officer's representative means an individual designated in accordance with subsection 201.602-2 of the Defense Federal Acquisition Regulation Supplement and authorized in writing by the contracting officer to perform specific technical or administrative functions.

(b) If the Contracting Officer designates a contracting officer's representative (COR), the Contractor will receive a copy of the written designation. It will specify the extent of the COR's authority to act on behalf of the contracting officer. The COR is not authorized to make any commitments or changes that will affect price, quality, quantity, delivery, or any other term or condition of the contract.

(a) Definition. Covered DoD official, as used in this clause, means an individual that—

(1) Leaves or left DoD service on or after January 28, 2008; and

(2)(i) Participated personally and substantially in an acquisition as defined in 41 U.S.C. 131 with a value in excess of $10 million, and serves or served—

(A) In an Executive Schedule position under subchapter II of chapter 53 of Title 5, United States Code;

(B) In a position in the Senior Executive Service under subchapter VIII of chapter 53 of Title 5, United States Code; or

(C) In a general or flag officer position compensated at a rate of pay for grade O-7 or above under section 201 of Title 37, United States Code; or

(ii) Serves or served in DoD in one of the following positions: Program manager, deputy program manager, procuring contracting officer, administrative contracting officer, source selection authority, member of the source selection evaluation board, or chief of a financial or technical evaluation team for a contract in an amount in excess of $10 million.

(b) The Contractor shall not knowingly provide compensation to a covered DoD official within 2 years after the official leaves DoD service, without first determining that the official has sought and received, or has not received after 30 days of seeking, a written opinion from the appropriate DoD ethics counselor regarding the applicability of post-employment restrictions to the activities that the official is expected to undertake on behalf of the Contractor.

(c) Failure by the Contractor to comply with paragraph (b) of this clause may subject the Contractor to rescission of this contract, suspension, or debarment in accordance with 41 U.S.C. 2105(c).

(a) Definitions. As used in this clause—

(1) Arising out of a contract with the DoD means any act in connection with—

(i) Attempting to obtain;

(ii) Obtaining; or

(iii) Performing a contract or first-tier subcontract of any agency, department, or component of the Department of Defense (DoD).

(2) Conviction of fraud or any other felony means any conviction for fraud or a felony in violation of state or Federal criminal statutes, whether entered on a verdict or plea, including a plea of nolo contendere, for which sentence has been imposed.

(3) Date of conviction means the date judgment was entered against the individual.

(b) Any individual who is convicted after September 29, 1988, of fraud or any other felony arising out of a contract with the DoD is prohibited from serving—

(1) In a management or supervisory capacity on this contract;

(2) On the board of directors of the Contractor;

(3) As a consultant, agent, or representative for the Contractor; or

(4) In any other capacity with the authority to influence, advise, or control the decisions of the Contractor with regard to this contract.

(c) Unless waived, the prohibition in paragraph (b) of this clause applies for not less than 5 years from the date of conviction.

(d) 10 U.S.C. 4656 provides that the Contractor shall be subject to a criminal penalty of not more than $500,000 if convicted of knowingly—

(1) Employing a person under a prohibition specified in paragraph (b) of this clause; or

(2) Allowing such a person to serve on the board of directors of the contractor or first-tier subcontractor.

(e) In addition to the criminal penalties contained in 10 U.S.C. 4656, the Government may consider other available remedies, such as—

(1) Suspension or debarment;

(2) Cancellation of the contract at no cost to the Government; or

(3) Termination of the contract for default.

(f) The Contractor may submit written requests for waiver of the prohibition in paragraph (b) of this clause to the Contracting Officer. Requests shall clearly identify—

(1) The person involved;

(2) The nature of the conviction and resultant sentence or punishment imposed;

(3) The reasons for the requested waiver; and

(4) An explanation of why a waiver is in the interest of national security.

(g) Subcontracts. The Contractor agrees to include the substance of this clause, appropriately modified to reflect the identity and relationship of the parties, in all first-tier subcontracts exceeding the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation, except those for commercial products, commercial services, or commercial components.

(h) Pursuant to 10 U.S.C. 4656(c), defense contractors and subcontractors may obtain information as to whether a particular person has been convicted of fraud or any other felony arising out of a contract with the DoD by contacting The Office of Justice Programs, The Denial of Federal Benefits Office, U.S. Department of Justice, telephone (301) 937-1542; www.ojp.usdoj.gov/BJA/grant/DPFC.html.

(a) The Contractor shall inform its employees in writing, in the predominant native language of the workforce, of contractor employee whistleblower rights and protections under 10 U.S.C. 4701, as described in subpart 203.9 of the Defense Federal Acquisition Regulation Supplement.

(b) The Contractor shall include the substance of this clause, including this paragraph (b), in all subcontracts.

The agency office of the Inspector General referenced in paragraphs (c) and (d) of FAR clause 52.203-13, Contractor Code of Business Ethics and Conduct, is the DoD Office of Inspector General at the following address:

(a) Definition. As used in this clause—

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Display of hotline poster(s). (1)(i) The Contractor shall display prominently the DoD fraud, waste, and abuse hotline poster prepared by the DoD Office of the Inspector General, in effect at time of contract award, in common work areas within business segments performing work under Department of Defense (DoD) contracts.

(ii) For contracts performed outside the United States, when security concerns can be appropriately demonstrated, the contracting officer may provide the contractor the option to publicize the program to contractor personnel in a manner other than public display of the poster, such as private employee written instructions and briefings.

(2) If the contract is funded, in whole or in part, by Department of Homeland Security (DHS) disaster relief funds and the work is to be performed in the United States, the DHS fraud hotline poster shall be displayed in addition to the DoD hotline poster. If a display of a DHS fraud hotline poster is required, the Contractor may obtain such poster from—

(i) DHS Office of Inspector General/MAIL STOP 0305, Attn: Office of Investigations—Hotline, 245 Murray Lane SW., Washington, DC 20528-0305; or

(ii) Via the Internet at https://www.oig.dhs.gov/assets/Hotline/DHS_OIG_Hotline-optimized.jpg.

(c)(1) These DoD hotline poster may be obtained from: Defense Hotline, The Pentagon, Washington, DC 20301-1900, or is also available via the internet at https://www.dodig.mil/Resources/Posters-and-Brochures/.

(2) If a significant portion of the employee workforce does not speak English, then the poster is to be displayed in the foreign languages that a significant portion of the employees speak.

(3) Additionally, if the Contractor maintains a company Web site as a method of providing information to employees, the Contractor shall display an electronic version of the required poster at the Web site.

(d) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (d), in all subcontracts that exceed the threshold specified in Defense Federal Acquisition Regulation Supplement 203.1004(b)(2)(ii) on the date of subcontract award, except when the subcontract is for the acquisition of a commercial product or commercial service.

(a) Definition. Covered DoD official is defined in the clause at 252.203-7000, Requirements Relating to Compensation of Former DoD Officials.

(b) By submission of this offer, the Offeror represents, to the best of its knowledge and belief, that all covered DoD officials employed by or otherwise receiving compensation from the Offeror, and who are expected to undertake activities on behalf of the Offeror for any resulting contract, are presently in compliance with all applicable post-employment restrictions, including those contained in 18 U.S.C. 207, 41 U.S.C. 2101-2107, 5 CFR part 2641, section 1045 of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91), and Federal Acquisition Regulation 3.104-2.

(a) The Contractor shall not release to anyone outside the Contractor's organization any unclassified information, regardless of medium (e.g., film, tape, document), pertaining to any part of this contract or any program related to this contract, unless—

(1) The Contracting Officer has given prior written approval;

(2) The information is otherwise in the public domain before the date of release; or

(3) The information results from or arises during the performance of a project that involves no covered defense information (as defined in the clause at DFARS 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting) and has been scoped and negotiated by the contracting activity with the contractor and research performer and determined in writing by the contracting officer to be fundamental research (which by definition cannot involve any covered defense information), in accordance with National Security Decision Directive 189, National Policy on the Transfer of Scientific, Technical and Engineering Information, in effect on the date of contract award and the Under Secretary of Defense (Acquisition, Technology, and Logistics) memoranda on Fundamental Research, dated May 24, 2010, and on Contracted Fundamental Research, dated June 26, 2008 (available at DFARS PGI 204.4).

(b) Requests for approval under paragraph (a)(1) shall identify the specific information to be released, the medium to be used, and the purpose for the release. The Contractor shall submit its request to the Contracting Officer at least 10 business days before the proposed date for release.

(c) The Contractor agrees to include a similar requirement, including this paragraph (c), in each subcontract under this contract. Subcontractors shall submit requests for authorization to release through the prime contractor to the Contracting Officer.

(a) If the schedule in this contract contains any contract line or subline items identified as not separately priced (NSP), it means that the unit price for the NSP line or subline item is included in the unit price of another, related line or subline item.

(b) The Contractor shall not invoice the Government for an item that includes in its price an NSP item until—

(1) The Contractor has also delivered the NSP item included in the price of the item being invoiced; and

(2) The Government has accepted the NSP item.

(c) This clause does not apply to technical data.

(a) A___ [insert specific type of contract action] is contemplated. The Contractor agrees to begin promptly negotiating with the Contracting Officer the terms of a definitive contract that will include—

(1) All clauses required by the Federal Acquisition Regulation (FAR) on the date of execution of the undefinitized contract action;

(2) All clauses required by law on the date of execution of the definitive contract action; and

(3) Any other mutually agreeable clauses, terms, and conditions.

(b) The Contractor agrees to submit a___ [insert type of proposal; e.g., fixed-price or cost-and-fee] proposal and certified cost or pricing data supporting its proposal. Notwithstanding FAR 52.216-26, Payments of Allowable Costs Before Definitization, failure to meet the qualifying proposal date in the contract definitization schedule could result in the Contracting Officer withholding an amount up to 5 percent of all subsequent requests for financing until the Contracting Officer determines that a proposal is qualifying.

(c) The schedule for definitizing this contract action is as follows [insert target date for definitization of the contract action and dates for submission of proposal, beginning of negotiations, and, if appropriate, submission of the make-or-buy and subcontracting plans and certified cost or pricing data]:

(d) If agreement on a definitive contract action to supersede this undefinitized contract action is not reached by the target date in paragraph (c) of this clause, or within any extension of it granted by the Contracting Officer, the Contracting Officer may, with the approval of the head of the contracting activity, determine a reasonable price or fee in accordance with FAR subpart 15.4 and part 31, subject to Contractor appeal as provided in the Disputes clause. In any event, the Contractor shall proceed with completion of the contract, subject only to the Limitation of Government Liability clause.

(1) After the Contracting Officer's determination of price or fee, the contract shall be governed by—

(i) All clauses required by the FAR on the date of execution of this undefinitized contract action for either fixed-price or cost-reimbursement contracts, as determined by the Contracting Officer under this paragraph (d);

(ii) All clauses required by law as of the date of the Contracting Officer's determination; and

(iii) Any other clauses, terms, and conditions mutually agreed upon.

(2) To the extent consistent with paragraph (d)(1) of this clause, all clauses, terms, and conditions included in this undefinitized contract action shall continue in effect, except those that by their nature apply only to an undefinitized contract action.

(e) The definitive contract resulting from this undefinitized contract action will include a negotiated___ [insert “cost/price ceiling” or “firm-fixed price”] in no event to exceed__[insert the not-to-exceed amount].

(a) Definitions. As used in this clause—

(1) Over and above work means work discovered during the course of performing overhaul, maintenance, and repair efforts that is—

(i) Within the general scope of the contract;

(ii) Not covered by the line item(s) for the basic work under the contract; and

(iii) Necessary in order to satisfactorily complete the contract.

(2) Work request means a document prepared by the Contractor which describes over and above work being proposed.

(b) The Contractor and Administrative Contracting Officer shall mutually agree to procedures for Government administration and Contractor performance of over and above work requests. If the parties cannot agree upon the procedures, the Administrative Contracting Officer has the unilateral right to direct the over and above work procedures to be followed. These procedures shall, as a minimum, cover—

(1) The format, content, and submission of work requests by the Contractor. Work requests shall contain data on the type of discrepancy disclosed, the specific location of the discrepancy, and the estimated labor hours and material required to correct the discrepancy. Data shall be sufficient to satisfy contract requirements and obtain the authorization of the Contracting Officer to perform the proposed work;

(2) Government review, verification, and authorization of the work; and

(3) Proposal pricing, submission, negotiation, and definitization.

(c) Upon discovery of the need for over and above work, the Contractor shall prepare and furnish to the Government a work request in accordance with the agreed-to procedures.

(d) The Government shall—

(1) Promptly review the work request;

(2) Verify that the proposed work is required and not covered under the basic contract line item(s);

(3) Verify that the proposed corrective action is appropriate; and

(4) Authorize over and above work as necessary.

(e) The Contractor shall promptly submit to the Contracting Officer, a proposal for the over and above work. The Government and Contractor will then negotiate a settlement for the over and above work. Contract modifications will be executed to definitize all over and above work.

(f) Failure to agree on the price of over and above work shall be a dispute within the meaning of the Disputes clause of this contract.

(a) This provision implements 10 U.S.C. 4959.

(b) The Offeror acknowledges by submission of its offer that by acceptance of the contract resulting from this solicitation, the Offeror may exceed the applicable small business size standard of the North American Industry Classification System (NAICS) code assigned to the contract and would no longer qualify as a small business concern for that NAICS code. Small business size standards matched to industry NAICS codes are published by the Small Business Administration and are available at 13 CFR 121.201 and https://www.sba.gov/document/support-table-size-standards. The Offeror is therefore encouraged to develop the capabilities and characteristics typically desired in contractors that are competitive as other-than-small contractors in this industry.

(c) For procurement technical assistance, the Offeror may contact the nearest APEX Accelerator. APEX Accelerator locations are available at https://www.apexaccelerators.us.

This clause supplements the Federal Acquisition Regulation 52.219-9, Small Business Subcontracting Plan, clause of this contract.

(a) Definition. As used in this clause—

Summary Subcontract Report (SSR) Coordinator means the individual who is registered in the Electronic Subcontracting Reporting System (eSRS) at the Department of Defense level and is responsible for acknowledging receipt or rejecting SSRs submitted under an individual subcontracting plan in eSRS for the Department of Defense.

(b) Subcontracts awarded to qualified nonprofit agencies designated by the Committee for Purchase From People Who Are Blind or Severely Disabled (41 U.S.C. 8502-8504), may be counted toward the Contractor's small business subcontracting goal (section 8025 of Pub. L. 108-87).

(c) A mentor firm, under the Pilot Mentor-Protégé Program established under section 831 of Public Law 101-510, as amended, may count toward its small disadvantaged business goal, subcontracts awarded to—

(1) Protégé firms which are qualified organizations employing the severely disabled; and

(2) Former protégé firms that meet the criteria in section 831(g)(4) of Public Law 101-510.

(d) The master plan is approved by the cognizant contract administration activity for the Contractor.

(e) In those subcontracting plans which specifically identify small businesses, the Contractor shall notify the Administrative Contracting Officer of any substitutions of firms that are not small business firms, for the small business firms specifically identified in the subcontracting plan. Notifications shall be in writing and shall occur within a reasonable period of time after award of the subcontract. Contractor-specified formats shall be acceptable.

(f)(1) For DoD, the Contractor shall submit reports in eSRS as follows:

(i) The Individual Subcontract Report (ISR) shall be submitted to the contracting officer at the procuring contracting office, even when contract administration has been delegated to the Defense Contract Management Agency.

(ii) Submit the consolidated SSR for an individual subcontracting plan to the “Department of Defense.”

(2) For DoD, the authority to acknowledge receipt or reject reports in eSRS is as follows:

(i) The authority to acknowledge receipt or reject the ISR resides with the contracting officer who receives it, as described in paragraph (f)(1)(i) of this clause.

(ii) The authority to acknowledge receipt of or reject SSRs submitted under an individual subcontracting plan resides with the SSR Coordinator.

(g) Include the clause at Defense Federal Acquisition Regulation Supplement (DFARS) 252.219-7004, Small Business Subcontracting Plan (Test Program), in subcontracts with subcontractors that participate in the Test Program described in DFARS 219.702-70, if the subcontract is expected to exceed the applicable threshold specified in Federal Acquisition Regulation 19.702(a), and to have further subcontracting opportunities.

This clause supplements the Federal Acquisition Regulation 52.219-9, Small Business Subcontracting Plan, clause of this contract.

(a) Definition. As used in this clause—

Summary Subcontract Report (SSR) Coordinator means the individual who is registered in the Electronic Subcontracting Reporting System (eSRS) at the Department of Defense level and is responsible for acknowledging receipt or rejecting SSRs submitted under an individual subcontracting plan in eSRS for the Department of Defense.

(b) Subcontracts awarded to qualified nonprofit agencies designated by the Committee for Purchase From People Who Are Blind or Severely Disabled (41 U.S.C. 8502-8504), may be counted toward the Contractor's small business subcontracting goal (section 8025 of Pub. L. 108-87).

(c) A mentor firm, under the Pilot Mentor-Protege Program established under section 831 of Public Law 101-510, as amended, may count toward its small disadvantaged business goal, subcontracts awarded to—

(1) Protege firms which are qualified organizations employing the severely disabled; and

(2) Former protege firms that meet the criteria in section 831(g)(4) of Public Law 101-510.

(d) The master plan is approved by the cognizant contract administration activity for the Contractor.

(e) In those subcontracting plans which specifically identify small businesses, the Contractor shall notify the Administrative Contracting Officer of any substitutions of firms that are not small business firms, for the small business firms specifically identified in the subcontracting plan. Notifications shall be in writing and shall occur within a reasonable period of time after award of the subcontract. Contractor-specified formats shall be acceptable.

(f)(1) For DoD, the Contractor shall submit reports in eSRS as follows:

(i) The Standard Form 294, Subcontracting Report for Individual Contracts, shall be submitted in accordance with the instructions on that form.

(ii) Submit the consolidated SSR to the “Department of Defense.”

(2) For DoD, the authority to acknowledge receipt of or reject SSRs submitted under an individual subcontracting plan in eSRS resides with the SSR Coordinator.

(g) Include the clause at Defense Federal Acquisition Regulation Supplement (DFARS) 252.219-7004, Small Business Subcontracting Plan (Test Program), in subcontracts with subcontractors that participate in the Test Program described in DFARS 219.702-70, if the subcontract is expected to exceed the applicable threshold specified in Federal Acquisition Regulation 19.702(a), and to have further subcontracting opportunities.

(a) Definitions. As used in this clause—

Eligible contractor means a business entity operated on a for-profit or nonprofit basis that—

(1) Employs severely disabled individuals at a rate that averages not less than 33 percent of its total workforce over the 12-month period prior to issuance of the solicitation;

(2) Pays not less than the minimum wage prescribed pursuant to 29 U.S.C. 206 to the employees who are severely disabled individuals; and

(3) Provides, for its employees, health insurance and a retirement plan comparable to those provided for employees by business entities of similar size in its industrial sector or geographic region.

Summary Subcontract Report (SSR) Coordinator means the individual who is registered in the Electronic Subcontracting Reporting System (eSRS) at the Department of Defense level and is responsible for acknowledging receipt or rejecting SSRs submitted under an individual subcontracting plan in eSRS for the Department of Defense.

(b)(1) Subcontracts awarded to qualified nonprofit agencies designated by the Committee for Purchase From People Who are Blind or Severely Disabled (41 U.S.C. 8502-8504), may be counted toward the Contractor's small business subcontracting goal (section 8025 of Pub. L. 108-87).

(2) Subcontracts awarded to eligible contractors under the Demonstration Project for Contractors Employing Persons with Disabilities (see Defense Federal Acquisition Regulation Supplement (DFARS) 226.72) may be counted toward the Contractor's small disadvantaged business subcontracting goal (section 853 of Pub. L. 108-136, as amended by division H, section 110 of Pub. L. 108-199).

(c) A mentor firm, under the Pilot Mentor-Protege Program established under section 831 of Public Law 101-510, may count toward its small disadvantaged business goal, subcontracts awarded to—

(1) Protege firms which are qualified organizations employing the severely disabled; and

(2) Former protege firms that meet the criteria in section 831(g)(4) of Public Law 101-510.

(d) The master plan is approved by the cognizant contract administration activity for the Contractor.

(e) In those subcontracting plans which specifically identify small businesses, the Contractor shall notify the Administrative Contracting Officer of any substitutions of firms that are not small business firms, for the small business firms specifically identified in the subcontracting plan. Notifications shall be in writing and shall occur within a reasonable period of time after award of the subcontract. Contractor-specified formats shall be acceptable.

(f)(1) For DoD, the Contractor shall submit reports in eSRS as follows:

(i) The Individual Subcontract Report (ISR) shall be submitted to the contracting officer at the procuring contracting office, even when contract administration has been delegated to the Defense Contract Management Agency.

(ii) Submit the consolidated SSR for an individual subcontracting plan to the “Department of Defense.”

(2) For DoD, the authority to acknowledge receipt or reject reports in eSRS is as follows:

(i) The authority to acknowledge receipt or reject the ISR resides with the contracting officer who receives it, as described in paragraph (f)(1)(i) of this clause.

(ii) The authority to acknowledge receipt of or reject SSRs submitted under an individual subcontracting plan resides with the SSR Coordinator.

(g) Include the clause at DFARS 252.219-7004, Small Business Subcontracting Plan (Test Program), in subcontracts with subcontractors that participate in the Test Program described in DFARS 219.702-70, if the subcontract is expected to exceed the applicable threshold specified in Federal Acquisition Regulation 19.702(a) and to have further subcontracting opportunities.

(f)(1)(i) The Standard Form 294 Subcontracting Report for Individual Contracts shall be submitted in accordance with the instructions on that form; paragraph (f)(2)(i) is inapplicable.

(a) Definitions. As used in this clause—

Covered small business concern means a small business concern, veteran-owned small business concern, service-disabled veteran-owned small business concern, HUBZone small business concern, women-owned small business concern, or small disadvantaged business concern, as these terms are defined in FAR 2.101.

Electronic Subcontracting Reporting System (eSRS) means the Governmentwide, electronic, web-based system for small business subcontracting program reporting. The eSRS is located at http://www.esrs.gov.

Failure to make a good faith effort to comply with a comprehensive subcontracting plan means a willful or intentional failure to perform in accordance with the requirements of the Contractor's approved comprehensive subcontracting plan or willful or intentional action to frustrate the plan.

Subcontract means any agreement (other than one involving an employer-employee relationship) entered into by a Federal Government prime Contractor or subcontractor calling for supplies or services required for performance of the contract or subcontract.

(b) Test Program. The Contractor's comprehensive small business subcontracting plan and its successors, which are authorized by and approved under the Test Program of 15 U.S.C. 637 note, as amended, shall be included in and made a part of this contract. Upon expulsion from the Test Program or expiration of the Test Program, the Contractor shall negotiate an individual subcontracting plan for all future contracts that meet the requirements of 15 U.S.C. 637(d).

(c) Eligibility requirements. To become and remain eligible to participate in the Test Program, a business concern is required to have furnished supplies or services (including construction) under at least three DoD contracts during the preceding fiscal year, having an aggregate value of at least $100 million.

(d) Reports. (1) The Contractor shall report semiannually for the 6-month periods ending March 31 and September 30, the information in paragraphs (d)(1)(i) through (v) of this section within 30 days after the end of the reporting period. Submit the report at https://www.esrs.gov.

(i) A list of contracts covered under its comprehensive small business subcontracting plan, to include the Commercial and Government Entity (CAGE) code and unique entity identifier.

(ii) The amount of first-tier subcontract dollars awarded during the 6-month period covered by the report to covered small business concerns, with the information set forth separately by—

(A) North American Industrial Classification System (NAICS) code;

(B) Major defense acquisition program, as defined in 10 U.S.C. 4201;

(C) Contract number, if the contract is for maintenance, overhaul, repair, servicing, rehabilitation, salvage, modernization, or modification of supplies, systems, or equipment, and the total value of the contract, including options, exceeds $100 million; and

(D) Military department.

(iii) Total number of subcontracts active under the Test Program that would have otherwise required a subcontracting plan.

(iv) Costs incurred in negotiating, complying with, and reporting on its comprehensive subcontracting plan.

(v) Costs avoided through the use of a comprehensive subcontracting plan.

(2) The Contractor shall—

(i) Ensure that subcontractors with subcontracting plans agree to submit an Individual Subcontract Report (ISR) and/or Summary Subcontract Report (SSR) using the Electronic Subcontracting Reporting System (eSRS).

(ii) Provide its contract number, its unique entity identifier, and the email address of the Contractor's official responsible for acknowledging or rejecting the ISR to all first-tier subcontractors, who will be required to submit ISRs, so they can enter this information into the eSRS when submitting their reports.

(iii) Require that each subcontractor with a subcontracting plan provide the prime contract number, its own unique entity identifier, and the email address of the subcontractor's official responsible for acknowledging or rejecting the ISRs to its subcontractors with subcontracting plans who will be required to submit ISRs.

(iv) Acknowledge receipt or reject all ISRs submitted by its subcontractors using eSRS.

(3) The Contractor shall submit SSRs using eSRS at http://www.esrs.gov. The reports shall provide information on subcontract awards to small business concerns, veteran-owned small business concerns, service-disabled veteran-owned small business concerns, HUBZone small business concerns, small disadvantaged business concerns, and women-owned small business concerns. Purchases from a corporation, company, or subdivision that is an affiliate of the prime Contractor or subcontractor are not included in these reports. Subcontract award data reported by prime contractors and subcontractors shall be limited to awards made to their immediate next-tier subcontractors. Credit cannot be taken for awards made to lower-tier subcontractors unless the Contractor or subcontractor has been designated to receive a small business or small disadvantaged business credit from a member firm of the Alaska Native—Corporations or an Indian tribe. Only subcontracts involving performance in the U.S. or its outlying areas should be included in these reports.

(i) This report may be submitted on a corporate, company, or subdivision (e.g., plant or division operating as a separate profit center) basis, as negotiated in the comprehensive subcontracting plan with the Defense Contract Management Agency.

(ii) This report encompasses all subcontracting under prime contracts and subcontracts with the Department of Defense, regardless of the dollar value of the subcontracts, and is based on the negotiated comprehensive subcontracting plan.

(iii) The report shall be submitted semiannually for the six months ending March 31 and the twelve months ending September 30. Reports are due 30 days after the close of each reporting period.

(iv) The authority to acknowledge receipt of or reject the SSR resides with the Defense Contract Management Agency.

(e) Failure to comply. The failure of the Contractor or subcontractor to comply in good faith with the clause of this contract entitled “Utilization of Small Business Concerns,” or an approved plan required by this clause, shall be a material breach of the contract.

(f) Liquidated damages. The Contracting Officer designated to manage the comprehensive subcontracting plan will exercise the functions of the Contracting Officer, as identified in paragraphs (f)(1) through (4) of this clause, on behalf of all DoD departments and agencies that awarded contracts covered by the Contractor's comprehensive subcontracting plan.

(1) To determine the need for liquidated damages, the Contracting Officer will conduct a compliance review during the fiscal year after the close of the fiscal year for which the plan is applicable. The Contracting Officer will compare the approved percentage or dollar goals to the total, actual subcontracting dollars covered by the plan.

(2) If the Contractor has failed to meet its approved subcontracting goal(s), the Contracting Officer will provide the Contractor written notice specifying the failure, advising of the potential for assessment of liquidated damages, and permitting the Contractor to demonstrate what good faith efforts have been made. The Contracting Officer may take the Contractor's failure to respond to the notice within 15 working days (or longer period at the Contracting Officer's discretion) as an admission that no valid explanation exists.

(3) If, after consideration of all relevant information, the Contracting Officer determines that the Contractor failed to make a good faith effort to comply with the comprehensive subcontracting plan, the Contracting Officer will issue a final decision to the Contractor to that effect and require the Contractor to pay liquidated damages to the Government in the amount identified in the comprehensive subcontracting plan.

(4) The Contractor shall have the right of appeal under the clause in this contract entitled “Disputes” from any final decision of the Contracting Officer.

(g) Subcontracts. The Contractor shall include in subcontracts that offer subcontracting opportunities, are expected to exceed the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, and are required to include the clause at FAR 52.219-8, Utilization of Small Business Concerns, the clauses at—

(1) FAR 52.219-9, Small Business Subcontracting Plan, and Defense Federal Acquisition Regulation Supplement (DFARS) 252.219-7003, Small Business Subcontracting Plan (DoD Contracts)—Basic;

(2) FAR 52.219-9, Small Business Subcontracting Plan, with its Alternate III, and DFARS 252.219-7003, Small Business Subcontracting Plan (DoD Contracts)—Alternate I, to allow for submission of SF 294s in lieu of ISRs; or

(3) DFARS 252.219-7004, Small Business Subcontracting Plan (Test Program), in subcontracts with subcontractors that participate in the Test Program described in DFARS 219.702-70.

(a) This contract is issued as a direct award between the contracting office and the 8(a) Contractor pursuant to the Partnership Agreement between the Small Business Administration (SBA) and the Department of Defense. Accordingly, the SBA, even if not identified in Section A of this contract, is the prime contractor and retains responsibility for 8(a) certification, for 8(a) eligibility determinations and related issues, and for providing counseling and assistance to the 8(a) Contractor under the 8(a) Program. The cognizant SBA district office is:

(b) The contracting office is responsible for administering the contract and for taking any action on behalf of the Government under the terms and conditions of the contract; provided that the contracting office shall give advance notice to the SBA before it issues a final notice terminating performance, either in whole or in part, under the contract. The contracting office also shall coordinate with the SBA prior to processing any novation agreement. The contracting office may assign contract administration functions to a contract administration office.

(c) The 8(a) Contractor agrees that it will notify the Contracting Officer, simultaneous with its notification to the SBA (as required by SBA's 8(a) regulations at 13 CFR 124.515), when the owner or owners upon whom 8(a) eligibility is based plan to relinquish ownership or control of the concern. Consistent with section 407 of Public Law 100-656, transfer of ownership or control shall result in termination of the contract for convenience, unless the SBA waives the requirement for termination prior to the actual relinquishing of ownership and control.

(a) Offers are solicited only from small business concerns expressly certified by the Small Business Administration (SBA) for participation in SBA's 8(a) Program and which meet the following criteria at the time of submission of offer:

(1) The Offeror is in conformance with the 8(a) support limitation set forth in its approved business plan.

(2) The Offeror is in conformance with the Business Activity Targets set forth in its approved business plan or any remedial action directed by SBA.

(3) If the competition is to be limited to 8(a) concerns within one or more specific SBA regions or districts, then the offeror's approved business plan is on the file and serviced by ________. [Contracting Officer completes by inserting the appropriate SBA District and/or Regional Office(s) as identified by SBA.]

(b) By submission of its offer, the Offeror represents that it meets all of the criteria set forth in paragraph (a) of this clause.

(c) Any award resulting from this solicitation will be made directly by the Contracting Officer to the successful 8(a) offeror selected through the evaluation criteria set forth in this solicitation.

(d)(1) Unless SBA has waived the requirements of paragraphs (d)(1)(i) through (iii) and (d)(2) of this clause in accordance with 13 CFR 121.1204, a small business concern that provides an end item it did not manufacture, process, or produce, shall—

(i) Provide an end item that a small business has manufactured, processed, or produced in the United States or its outlying areas; for kit assemblers, see paragraph (d)(2) of this clause instead;

(ii) Be primarily engaged in the retail or wholesale trade and normally sell the type of item being supplied; and

(iii) Take ownership or possession of the item(s) with its personnel, equipment, or facilities in a manner consistent with industry practice; for example, providing storage, transportation, or delivery.

(2) When the end item being acquired is a kit of supplies, at least 50 percent of the total cost of the components of the kit shall be manufactured, processed, or produced by small businesses in the United States or its outlying areas.

(3) The requirements of paragraphs (d)(1)(i) through (iii) and (d)(2) of this clause do not apply to construction or service contracts.

(e) The ________ [insert name of SBA's contractor] will notify the ________ [insert name of contracting agency] Contracting Officer in writing immediately upon entering an agreement (either oral or written) to transfer all or part of its stock or other ownership interest to any other party.

The Contractor shall not begin performance under this purchase order until 2 working days have passed from the date of its receipt. Unless the Contractor receives notification from the Small Business Administration that it is ineligible for this 8(a) award, or otherwise receives instructions from the Contracting Officer, performance under this purchase order may begin on the third working day following receipt of the purchase order. If a determination of ineligibility is issued within the 2-day period, the purchase order shall be considered canceled.

(a) Definition. As used in this provision—

Nonprofit organization means any organization that is—

(1) Described in section 501(c) of the Internal Revenue Code of 1986; and

(2) Exempt from tax under section 501(a) of that Code.

(b) A nonprofit organization is not precluded from competing for a contract for religious-related services to be performed on a U.S. military installation notwithstanding that a nonprofit organization is not a small business concern as identified in FAR 19.000(a)(3).

(c) If the apparently successful offeror has not represented in its offer or quotation that it is a small business concern identified in FAR 19.000(a)(3), as appropriate to the solicitation, the Contracting Officer will verify that the offeror is registered in the System for Award Management (SAM) database as a nonprofit organization.

The Contractor's procedures for protecting against unauthorized disclosure of information shall not require Department of Defense employees or members of the Armed Forces to relinquish control of their work products, whether classified or not, to the contractor.

(a) The Contractor shall employ, for the purpose of performing that portion of the contract work in ________, individuals who are residents thereof and who, in the case of any craft or trade, possess or would be able to acquire promptly the necessary skills to perform the contract.

(b) The Contractor shall insert the substance of this clause, including this paragraph (b), in each subcontract awarded under this contract.

(a) The Contractor shall comply with all—

(1) Local laws, regulations, and labor union agreements governing work hours; and

(2) Labor regulations including collective bargaining agreements, workers' compensation, working conditions, fringe benefits, and labor standards or labor contract matters.

(b) The Contractor indemnifies and holds harmless the United States Government from all claims arising out of the requirements of this clause. This indemnity includes the Contractor's obligation to handle and settle, without cost to the United States Government, any claims or litigation concerning allegations that the Contractor or the United States Government, or both, have not fully complied with local labor laws or regulations relating to the performance of work required by this contract.

(c) Notwithstanding paragraph (b) of this clause, consistent with paragraphs 31.205-15(a) and 31.205-47(d) of the Federal Acquisition Regulation, the Contractor will be reimbursed for the costs of all fines, penalties, and reasonable litigation expenses incurred as a result of compliance with specific contract terms and conditions or written instructions from the Contracting officer.

Prior to the date set for commencement of work and services under this contract, the Contractor shall obtain the prescribed permit from the Inspectorate of Labor having jurisdiction over the work site, in accordance with Article 5g of Italian Law Number 1369, dated October 23, 1960. The Contractor shall ensure that a copy of the permit is available at all reasonable times for inspection by the Contracting Officer or an authorized representative. Failure to obtain such permit may result in termination of the contract for the convenience of the United States Government, at no cost to the United States Government.

(a) The Contractor shall comply with all Spanish Government social security laws and regulations. Within 30 calendar days after the start of contract performance, the Contractor shall ensure that copies of the documents identified in paragraph (a)(1) through (a)(5) of this clause are available at all reasonable times for inspection by the Contracting Officer or an authorized representative. The Contractor shall retain the records in accordance with the Audit and Records clause of this contract.

(1) TC1—Certificate of Social Security Payments;

(2) TC2—List of Employees;

(3) TC2/1—Certificate of Social Security Payments for Trainees;

(4) Nominal (pay statements) signed by both the employee and the Contractor; and

(5) Informa de Situacion de Empressa (Report of the Condition of the Enterprise) from the Ministerio de Trabajo y S.S., Tesoreria General de la Seguridad Social (annotated with the pertinent contract number(s) next to the employee's name).

(b) All TC1's, TC2's, and TC2/1's shall contain a representation that they have been paid by either the Social Security Administration office or the Contractor's bank or savings institution. Failure by the Contractor to comply with the requirements of this clause may result in termination of the contract under the clause of the contract entitled “Default.”

The work required by this contract shall not be performed by any alien who is issued a visa or otherwise provided nonimmigrant status under Section 101(a)(15)(H)(ii) of the Immigration and Nationality Act (8 U.S.C. 1101(a)(15)(H)(ii)). This prohibition does not apply to the performance of work by lawfully admitted citizens of the freely associated states of the Republic of the Marshall Islands, the Federated States of Micronesia, or the Republic of Palau.

(a) Definitions. As used in this clause—

Covered subcontractor means any entity that has a subcontract valued in excess of $1 million, except a subcontract for the acquisition of commercial products or commercial services, including commercially available off-the-shelf items.

Subcontract means any contract, as defined in Federal Acquisition Regulation subpart 2.1, to furnish supplies or services for performance of this contract or a higher-tier subcontract thereunder.

(b) The Contractor—

(1) Agrees not to—

(i) Enter into any agreement with any of its employees or independent contractors that requires, as a condition of employment, that the employee or independent contractor agree to resolve through arbitration—

(A) Any claim under title VII of the Civil Rights Act of 1964; or

(B) Any tort related to or arising out of sexual assault or harassment, including assault and battery, intentional infliction of emotional distress, false imprisonment, or negligent hiring, supervision, or retention; or

(ii) Take any action to enforce any provision of an existing agreement with an employee or independent contractor that mandates that the employee or independent contractor resolve through arbitration—

(A) Any claim under title VII of the Civil Rights Act of 1964; or

(B) Any tort related to or arising out of sexual assault or harassment, including assault and battery, intentional infliction of emotional distress, false imprisonment, or negligent hiring, supervision, or retention; and

(2) Certifies, by signature of the contract, that it requires each covered subcontractor to agree not to enter into, and not to take any action to enforce, any provision of any existing agreements, as described in paragraph (b)(1) of this clause, with respect to any employee or independent contractor performing work related to such subcontract.

(c) The prohibitions of this clause do not apply with respect to a contractor's or subcontractor's agreements with employees or independent contractors that may not be enforced in a court of the United States.

(d) The Secretary of Defense may waive the applicability of the restrictions of paragraph (b) of this clause in accordance with Defense Federal Acquisition Regulation Supplement 222.7404.

(a) “Hazardous material,” as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract.

(b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labelling requirements of one of the following statutes:

(1) Federal Insecticide, Fungicide and Rodenticide Act;

(2) Federal Food, Drug and Cosmetics Act;

(3) Consumer Product Safety Act;

(4) Federal Hazardous Substances Act; or

(5) Federal Alcohol Administration Act.

(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labelled in accordance with one of the Acts in paragraphs (b) (1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.

(d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph (c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract.

(e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract).

(a) Definition. As used in this clause—

Military installation means a base, camp, post, station, yard, center, or other activity under the jurisdiction of the Secretary of a military department or, in the case of an activity in a foreign country, under the operational control of the Secretary of a military department or the Secretary of Defense (see 10 U.S.C. 2801(c)(4)).

(b) Training. Contractor personnel who require routine physical access to a Federally-controlled facility or military installation shall complete Level I antiterrorism awareness training within 30 days of requiring access and annually thereafter. In accordance with Department of Defense Instruction O-2000.16 Volume 1, DoD Antiterrorism (AT) Program Implementation: DoD AT Standards, Level I antiterrorism awareness training shall be completed—

(1) Through a DoD-sponsored and certified computer or web-based distance learning instruction for Level I antiterrorism awareness; or

(2) Under the instruction of a Level I antiterrorism awareness instructor.

(c) Additional information. Information and guidance pertaining to DoD antiterrorism awareness training is available at https://jko.jten.mil/ or as otherwise identified in the performance work statement.

(d) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (d), in subcontracts, including subcontracts for commercial products and commercial services, when subcontractor performance requires routine physical access to a Federally-controlled facility or military installation.

(a) Definition. Ammunition and explosives, as used in this clause—

(1) Means liquid and solid propellants and explosives, pyrotechnics, incendiaries and smokes in the following forms:

(i) Bulk,

(ii) Ammunition;

(iii) Rockets;

(iv) Missiles;

(v) Warheads;

(vi) Devices; and

(vii) Components of (i) through (vi), except for wholly inert items.

(2) This definition does not include the following, unless the Contractor is using or incorporating these materials for initiation, propulsion, or detonation as an integral or component part of an explosive, an ammunition or explosive end item, or of a weapon system—

(i) Inert components containing no explosives, propellants, or pyrotechnics;

(ii) Flammable liquids;

(iii) Acids;

(iv) Oxidizers;

(v) Powdered metals; or

(vi) Other materials having fire or explosive characteristics.

(b) Safety requirements. (1) The Contractor shall comply with the requirements of DoD Manual 4145.26, DoD Contractors' Safety Manual for Ammunition and Explosives, hereafter referred to as “the manual,” in effect on the date of the solicitation for this contract. The Contractor shall also comply with any other additional requirements included in the schedule of this contract.

(2) The Contractor shall allow the Government access to the Contractor's facilities, personnel, and safety program documentation. The Contractor shall allow authorized Government representatives to evaluate safety programs, implementation, and facilities.

(c) Noncompliance with the manual. (1) If the Contracting Officer notifies the Contractor of any noncompliance with the manual or schedule provisions, the Contractor shall take immediate steps to correct the noncompliance. The Contractor is not entitled to reimbursement of costs incurred to correct noncompliances unless such reimbursement is specified elsewhere in the contract.

(2) The Contractor has 30 days from the date of notification by the Contracting Officer to correct the noncompliance and inform the Contracting Officer of the actions taken. The Contracting Officer may direct a different time period for the correction of noncompliances.

(3) If the Contractor refuses or fails to correct noncompliances within the time period specified by the Contracting Officer, the Government has the right to direct the Contractor to cease performance on all or part of this contract. The Contractor shall not resume performance until the Contracting Officer is satisfied that the corrective action was effective and the Contracting Officer so informs the Contractor.

(4) The Contracting Officer may remove Government personnel at any time the Contractor is in noncompliance with any safety requirement of this clause.

(5) If the direction to cease work or the removal of Government personnel results in increased costs to the Contractor, the Contractor shall not be entitled to an adjustment in the contract price or a change in the delivery or performance schedule unless the Contracting Officer later determines that the Contractor had in fact complied with the manual or schedule provisions. If the Contractor is entitled to an equitable adjustment, it shall be made in accordance with the Changes clause of this contract.

(d) Mishaps. If a mishap involving ammunition or explosives occurs, the Contractor shall—

(1) Notify the Contracting Officer immediately;

(2) Conduct an investigation in accordance with other provisions of this contract or as required by the Contracting Officer; and

(3) Submit a written report to the Contracting Officer.

(e) Contractor responsibility for safety. (1) Nothing in this clause, nor any Government action or failure to act in surveillance of this contract, shall relieve the Contractor of its responsibility for the safety of—

(i) The Contractor's personnel and property;

(ii) The Government's personnel and property; or

(iii) The general public.

(2) Nothing in this clause shall relieve the Contractor of its responsibility for complying with applicable Federal, State, and local laws, ordinances, codes, and regulations (including those requiring the obtaining of licenses and permits) in connection with the performance of this contract.

(f) Contractor responsibility for contract performance. (1) Neither the number or frequency of inspections performed by the Government, nor the degree of surveillance exercised by the Government, relieve the Contractor of its responsibility for contract performance.

(2) If the Government acts or fails to act in surveillance or enforcement of the safety requirements of this contract, this does not impose or add to any liability of the Government.

(g) Subcontractors. (1) The Contractor shall insert this clause, including this paragraph (g), in every subcontract that involves ammunition or explosives.

(i) The clause shall include a provision allowing authorized Government safety representatives to evaluate subcontractor safety programs, implementation, and facilities as the Government determines necessary.

(ii) Note: The Government Contracting Officer or authorized representative shall notify the prime Contractor of all findings concerning subcontractor safety and compliance with the manual. The Contracting Officer or authorized representative may furnish copies to the subcontractor. The Contractor in turn shall communicate directly with the subcontractor, substituting its name for references to “the Government”. The Contractor and higher tier subcontractors shall also include provisions to allow direction to cease performance of the subcontract if a serious uncorrected or recurring safety deficiency potentially causes an imminent hazard to DoD personnel, property, or contract performance.

(2) The Contractor agrees to ensure that the subcontractor complies with all contract safety requirements. The Contractor will determine the best method for verifying the adequacy of the subcontractor's compliance.

(3) The Contractor shall ensure that the subcontractor understands and agrees to the Government's right to access to the subcontractor's facilities, personnel, and safety program documentation to perform safety surveys. The Government performs these safety surveys of subcontractor facilities solely to prevent the occurrence of any mishap which would endanger the safety of DoD personnel or otherwise adversely impact upon the Government's contractual interests.

(4) The Contractor shall notify the Contracting Officer or authorized representative before issuing any subcontract when it involves ammunition or explosives. If the proposed subcontract represents a change in the place of performance, the Contractor shall request approval for such change in accordance with the clause of this contract entitled “Change in Place of Performance—Ammunition and Explosives”.

(a) The Offeror shall identify, in the “Place of Performance” provision of this solicitation, the place of performance of all ammunition and explosives work covered by the Safety Precautions for Ammunition and Explosives clause of this solicitation. Failure to furnish this information with the offer may result in rejection of the offer.

(b) The Offeror agrees not to change the place of performance of any portion of the offer covered by the Safety Precautions for Ammunition and Explosives clause contained in this solicitation after the date set for receipt of offers without the written approval of the Contracting Officer. The Contracting Officer shall grant approval only if there is enough time for the Government to perform the necessary safety reviews on the new proposed place of performance.

(c) If a contract results from this offer, the Contractor agrees not to change any place of performance previously cited without the advance written approval of the Contracting Officer.

(a) Definitions. As used in this clause—

Storage means a non-transitory, semi-permanent or permanent holding, placement, or leaving of material. It does not include a temporary accumulation of a limited quantity of a material used in or a waste generated or resulting from authorized activities, such as servicing, maintenance, or repair of Department of Defense (DoD) items, equipment, or facilities.

Toxic or hazardous materials means—

(i) Materials referred to in section 101(14) of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) of 1980 (42 U.S.C. 9601(14)) and materials designated under section 102 of CERCLA (42 U.S.C. 9602) (40 CFR Part 302);

(ii) Materials that are of an explosive, flammable, or pyrotechnic nature; or

(iii) Materials otherwise identified by the Secretary of Defense as specified in DoD regulations.

(b) In accordance with 10 U.S.C. 2692, the Contractor is prohibited from storing, treating, or disposing of toxic or hazardous materials not owned by DoD on a DoD installation, except to the extent authorized by a statutory exception to 10 U.S.C. 2692 or as authorized by the Secretary of Defense. A charge may be assessed for any storage or disposal authorized under any of the exceptions to 10 U.S.C. 2692. If a charge is to be assessed, then such assessment shall be identified elsewhere in the contract with payment to the Government on a reimbursable cost basis.

(c) The Contractor shall include the substance of this clause, including this paragraph (c), in all subcontracts that require, may require, or permit a subcontractor access to a DoD installation, at any subcontract tier.

(a) Definitions. As used in this clause—

Storage means a non-transitory, semi-permanent or permanent holding, placement, or leaving of material. It does not include a temporary accumulation of a limited quantity of a material used in or a waste generated or resulting from authorized activities, such as servicing, maintenance, or repair of Department of Defense (DoD) items, equipment, or facilities.

Toxic or hazardous materials means—

(i) Materials referred to in section 101(14) of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) of 1980 (42 U.S.C. 9601(14)) and materials designated under section 102 of CERCLA (42 U.S.C. 9602) (40 CFR Part 302);

(ii) Materials that are of an explosive, flammable, or pyrotechnic nature; or

(iii) Materials otherwise identified by the Secretary of Defense as specified in DoD regulations.

(b) In accordance with 10 U.S.C. 2692, the Contractor is prohibited from storing, treating, or disposing of toxic or hazardous materials not owned by DoD on a DoD installation, except to the extent authorized by a statutory exception to 10 U.S.C. 2692 or as authorized by the Secretary of Defense. A charge may be assessed for any storage or disposal authorized under any of the exceptions to 10 U.S.C. 2692. If a charge is to be assessed, then such assessment shall be identified elsewhere in the contract with payment to the Government on a reimbursable cost basis.

(c) With respect to treatment or disposal authorized pursuant to DFARS 223.7104(10) (10 U.S.C. 2692(b)(10), and notwithstanding any other provision of the contract, the Contractor assumes all financial and environmental responsibility and liability resulting from any treatment or disposal of toxic or hazardous materials not owned by DoD on a military installation. The Contractor shall indemnify, defend, and hold the Government harmless for all costs, liability, or penalties resulting from the Contractor's treatment or disposal of toxic or hazardous materials not owned by DoD on a military installation.

(d) The Contractor shall include the substance of this clause, including this paragraph (d), in all subcontracts that require, may require, or permit a subcontractor access to a DoD installation, at any tier. Inclusion of the substance of this clause in subcontracts does not relieve the prime Contractor of liability to the Government under paragraph (c) of this clause.

(a) Definition. As used in this clause—Arms, ammunition, and explosives (AA&E) means those items within the scope of DoD Manual 5100.76, Physical Security of Sensitive Conventional Arms, Ammunition, and Explosives.

(b) The requirements of DoD Manual 5100.76 apply to the following items of AA&E being developed, produced, manufactured, or purchased for the Government, or provided to the Contractor as Government-furnished property under this contract:

(c) The Contractor shall comply with the requirements of DoD Manual 5100.76, as specified in the statement of work. The edition of DoD Manual 5100.76 in effect on the date of issuance of the solicitation for this contract shall apply.

(d) The Contractor shall allow representatives of the Defense Counterintelligence and Security Agency (DCSA), and representatives of other appropriate offices of the Government, access at all reasonable times into its facilities and those of its subcontractors, for the purpose of performing surveys, inspections, and investigations necessary to review compliance with the physical security standards applicable to this contract.

(e) The Contractor shall notify the cognizant DCSA field office of any subcontract involving AA&E within 10 days after award of the subcontract.

(f) Subcontracts. The Contractor shall ensure that the requirements of this clause are included in all subcontracts, at every tier—

(1) For the development, production, manufacture, or purchase of AA&E; or

(2) When AA&E will be provided to the subcontractor as Government-furnished property.

(g) Nothing in this clause shall relieve the Contractor of its responsibility for complying with applicable Federal, state, and local laws, ordinances, codes, and regulations (including requirements for obtaining licenses and permits) in connection with the performance of this contract.

(a) Definitions. As used in this clause—

Homogeneous material means a material that cannot be mechanically disjointed into different materials and is of uniform composition throughout.

(1) Examples of homogeneous materials include individual types of plastics, ceramics, glass, metals, alloys, paper, board, resins, and surface coatings.

(2) Homogeneous material does not include conversion coatings that chemically modify the substrate. Mechanically disjointed means that the materials can, in principle, be separated by mechanical actions such as unscrewing, cutting, crushing, grinding, and abrasive processes.

(b) Prohibition. (1) Unless otherwise specified by the Contracting Officer, the Contractor shall not provide any deliverable or construction material under this contract that—

(i) Contains hexavalent chromium in a concentration greater than 0.1 percent by weight in any homogenous material; or

(ii) Requires the removal or reapplication of hexavalent chromium materials during subsequent sustainment phases of the deliverable or construction material.

(2) This prohibition does not apply to hexavalent chromium produced as a by-product of manufacturing processes.

(c) If authorization for incorporation of hexavalent chromium in a deliverable or construction material is required, the Contractor shall submit a request to the Contracting Officer.

(d) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (d), in all subcontracts, including subcontracts for commercial products or commercial services, that are for supplies, maintenance and repair services, or construction materials.

(a) Definitions. As used in this clause, perfluoroalkyl substances and polyfluoroalkyl substances have the meanings given in section 322(f) of the National Defense Authorization Act for Fiscal Year 2020 (Pub. L. 116-92).

(b) Prohibition. The Contractor shall not provide or use under this contract any fire-fighting agent that contains perfluoroalkyl substances or polyfluoroalkyl substances in excess of one part per billion.

(c) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (c), in all subcontracts, including subcontracts for commercial products and commercial services, relating to fire-fighting on a military installation.

(a) Definitions. Commercially available off-the-shelf (COTS) item, component, critical component, critical item, domestic end product, foreign end product, qualifying country, qualifying country end product, and United States, as used in this provision, have the meanings given in the 252.225-7001, Buy American and Balance of Payments Program—Basic clause of this solicitation.

(b) Evaluation. The Government—

(1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) Will evaluate offers of qualifying country end products without regard to the restrictions of the Buy American statute or the Balance of Payments Program.

(c) Certifications and identification of country of origin.

(1) For all line items subject to the Buy American and Balance of Payments Program—Basic clause of this solicitation, the Offeror certifies that—

(i) Each end product, except those listed in paragraphs (c)(2) or (3) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c)(4) of this provision contains a critical component or a critical item; and

(ii) For end products other than COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country. For those end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

(2) The Offeror certifies that the following end products are qualifying country end products:

(3) The following end products are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

(4) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component or a critical item (see Federal Acquisition Regulation 25.105).

Domestic end products containing a critical component or a critical item: Line Item Number [List as necessary]

(a) Definitions. Commercially available off-the-shelf (COTS) item, component, critical component, critical item, domestic end product, foreign end product, qualifying country, qualifying country end product, South Caucasus/Central and South Asian (SC/CASA) state, South Caucasus/Central and South Asian (SC/CASA) state end product, and United States, as used in this provision, have the meanings given in the 252.225-7001, Buy American and Balance of Payments Program—Alternate I clause of this solicitation.

(b) Evaluation. The Government—

(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) Will evaluate offers of qualifying country end products or SC/CASA state end products without regard to the restrictions of the Buy American statute or the Balance of Payments Program.

(c) Certifications and identification of country of origin.

(1) For all line items subject to the Buy American and Balance of Payments Program—Alternate I clause of this solicitation, the Offeror certifies that—

(i) Each end product, except those listed in paragraphs (c)(2) or (3) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c)(4) of this provision contains a critical component or a critical item; and

(ii) For end products other than COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country. For those end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

(2) The Offeror certifies that the following end products are qualifying country end products or SC/CASA state end products:

(3) The following end products are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

(4) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component or a critical item (see Federal Acquisition Regulation 25.105).

Domestic end products containing a critical component or a critical item: Line Item Number [List as necessary].

(a) Definitions. As used in this clause—

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “ commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means a domestic construction material or domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with FAR 25.101(d), or award is made before January 1, 2030, for a foreign end product that exceeds 55 percent domestic content (see Defense Federal Acquisition Regulation Supplement 225.103(b)(ii)). The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) This clause implements 41 U.S.C. chapter 83, Buy American. In accordance with 41 U.S.C. 1907, the component test of the Buy American statute is waived for an end product that is a COTS item (see FAR 12.505(a)(1)). Unless otherwise specified, this clause applies to all line items in the contract.

(c) The Contractor shall deliver only domestic end products unless, in its offer, it specified delivery of other end products in the Buy American —Balance of Payments Program Certificate provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, the Contractor shall deliver a qualifying country end product or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(a) Definitions. As used in this clause—

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means a domestic construction material or domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with FAR 25.101(d), or award is made before January 1, 2030, for a foreign end product that exceeds 55 percent domestic content (see Defense Federal Acquisition Regulation Supplement 225.103(b)(ii)). The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

South Caucasus/Central and South Asian (SC/CASA) state means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

South Caucasus/Central and South Asian (SC/CASA) state end product means an article that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) This clause implements the Balance of Payments Program. Unless otherwise specified, this clause applies to all line items in the contract.

(c) The Contractor shall deliver only domestic end products unless, in its offer, it specified delivery of other end products in the Buy American Balance of Payments Program Certificate provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or an SC/CASA state end product, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

Alternate II. As prescribed in 225.1101(2)(i) and (2)(iv), use the following clause, which includes, in the definitions of “domestic end product” at paragraph (1)(ii)(A) and “qualifying country end product” at paragraph (2)(i), the domestic content threshold that will apply to the entire contract period of performance.

(a) Definitions. As used in this clause—

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means a domestic construction material or domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds, for the entire period of performance for a contract awarded in calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) This clause implements 41 U.S.C. chapter 83, Buy American. In accordance with 41 U.S.C. 1907, the component test of the Buy American statute is waived for an end product that is a COTS item (see FAR 12.505(a)(1)). Unless otherwise specified, this clause applies to all line items in the contract.

(c) The Contractor shall deliver only domestic end products unless, in its offer, it specified delivery of other end products in the Buy American—Balance of Payments Program Certificate provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, the Contractor shall deliver a qualifying country end product or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

Alternate III. As prescribed in 225.1101(2)(i) and (2)(v), use the following clause, which includes, in the definitions of “domestic end product” at paragraph (1)(ii)(A) and “qualifying country end product” at paragraph (2)(i), the domestic content threshold that will apply to the entire contract period of performance; adds “South Caucasus/Central and South Asian (SC/CASA) state” and “South Caucasus/Central and South Asian (SC/CASA) state end product” to paragraph (a); and uses different paragraphs (b) and (c) than the basic clause:

(a) Definitions. As used in this clause—

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means a domestic construction material or domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

South Caucasus/Central and South Asian (SC/CASA) state means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

South Caucasus/Central and South Asian (SC/CASA) state end product means an article that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) This clause implements the Balance of Payments Program. Unless otherwise specified, this clause applies to all line items in the contract.

(c) The Contractor shall deliver only domestic end products unless, in its offer, it specified delivery of other end products in the Buy American—Balance of Payments Program Certificate provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or an SC/CASA state end product, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(a) Definition. Qualifying country, as used in this clause, means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

(b) Subject to the restrictions in section 225.872 of the Defense FAR Supplement, the Contractor shall not preclude qualifying country sources or U.S. sources from competing for subcontracts under this contract.

(a) Definition. United States, as used in this provision, means the 50 States, the District of Columbia, and outlying areas.

(b) The offeror shall submit, with its offer, a report of intended performance outside the United States and Canada if—

(1) The offer exceeds $15 million in value; and

(2) The offeror is aware that the offeror or a first-tier subcontractor intends to perform any part of the contract outside the United States and Canada that—

(i) Exceeds $750,000 in value; and

(ii) Could be performed inside the United States or Canada.

(c) Information to be reported includes that for—

(1) Subcontracts;

(2) Purchases; and

(3) Intracompany transfers when transfers originate in a foreign location.

(d) The offeror shall submit the report using—

(1) DD Form 2139, Report of Contract Performance Outside the United States; or

(2) A computer-generated report that contains all information required by DD Form 2139.

(e) The offeror may obtain a copy of DD Form 2139 from the Contracting Officer or via the Internet at http://www.dtic.mil/whs/directives/infomgt/forms/formsprogram.htm.

(a) Definition. As used in this clause—

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Reporting requirement. The Contractor shall submit a report in accordance with this clause, if the Contractor or a first-tier subcontractor will perform any part of this contract outside the United States and Canada that—

(1) Exceeds the threshold specified in Defense Federal Acquisition Regulation Supplement 225.7201(a) on the date of award of this contract; and

(2) Could be performed inside the United States or Canada.

(c) Submission of reports. The Contractor—

(1) Shall submit a report as soon as practical after the information is known;

(2) To the maximum extent practicable, shall submit a report regarding a first-tier subcontractor at least 30 days before award of the subcontract;

(3) Need not resubmit information submitted with its offer, unless the information changes;

(4) Shall submit all reports to the Contracting Officer; and

(5) Shall submit a copy of each report to: Principal Director, Defense Pricing, Contracting, and Acquisition Policy (Contract Policy), OUSD(A&S) DPCAP/CP, Washington, DC 20301-3060.

(d) Report format. The Contractor—

(1) Shall submit reports using—

(i) DD Form 2139, Report of Contract Performance Outside the United States; or

(ii) A computer-generated report that contains all information required by DD Form 2139; and

(2) May obtain copies of DD Form 2139 from the Contracting Officer or via the Internet at https://www.esd.whs.mil/Directives/forms/.

(a) Definition. United States, as used in this clause, means the 50 States, the District of Columbia, and outlying areas.

(b) This clause applies only if the Contractor is—

(1) A concern incorporated in the United States (including a subsidiary that is incorporated in the United States, even if the parent corporation is not incorporated in the United States); or

(2) An unincorporated concern having its principal place of business in the United States.

(c) On each invoice, voucher, or other request for payment under this contract, the Contractor shall identify that part of the requested payment that represents estimated expenditures in the United States. The identification—

(1) May be expressed either as dollar amounts or as percentages of the total amount of the request for payment;

(2) Should be based on reasonable estimates; and

(3) Shall state the full amount of the payment requested, subdivided into the following categories:

(i) U.S. products—expenditures for material and equipment manufactured or produced in the United States, including end products, components, or construction material, but excluding transportation;

(ii) U.S. services—expenditures for services performed in the United States, including all charges for overhead, other indirect costs, and profit under construction or service contracts;

(iii) Transportation on U.S. carriers—expenditures for transportation furnished by U.S. flag, ocean, surface, and air carriers; and

(iv) Expenditures not identified under paragraphs (c)(3)(i) through (iii) of this clause.

(d) Nothing in this clause requires the establishment or maintenance of detailed accounting records or gives the U.S. Government any right to audit the Contractor's books or records.

(a) Definition. United States, as used in this clause, means the 50 States, the District of Columbia, and outlying areas.

(b) If the Contractor is required to deliver under this contract one or more American flags (Product or Service Code 8345), such flag(s), including the materials and components thereof, shall be manufactured in the United States, consistent with the requirements at 10 U.S.C. 4862 (commonly known as the “Berry Amendment”).

(c) This clause does not apply to the acquisition of any end items or components related to flying or displaying the flag (e.g., flagpoles and accessories).

(a) Definitions. As used in this clause—

600 series of the Commerce Control List means the series of 5-character export control classification numbers (ECCNs) of the Commerce Control List of the Export Administration Regulations in 15 CFR part 774, supplement no. 1, that have a “6” as the third character. The 600 series constitutes the munitions and munitions-related ECCNs within the larger Commerce Control List. (See definition of “600 series” in 15 CFR 772.)

Communist Chinese military company means any entity, regardless of geographic location, that is—

(1) A part of the commercial or defense industrial base of the People's Republic of China (including a subsidiary or affiliate of such entity); or

(2) Owned or controlled by, or affiliated with, an element of the Government or armed forces of the People's Republic of China.

Item means—

(1) A USML defense article, as defined at 22 CFR 120.6;

(2) A USML defense service, as defined at 22 CFR 120.9; or

(3) A 600 series item, as defined at 15 CFR 772.1.

United States Munitions List means the munitions list of the International Traffic in Arms Regulation in 22 CFR part 121.

(b) Any items covered by the United States Munitions List or the 600 series of the Commerce Control List that are delivered under this contract may not be acquired, directly or indirectly, from a Communist Chinese military company.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in all subcontracts for items covered by the United States Munitions List or the 600 series of the Commerce Control List.

(a) Definitions. As used in this clause—

Alloy means a metal consisting of a mixture of a basic metallic element and one or more metallic, or non-metallic, alloying elements.

(i) For alloys named by a single metallic element (e.g., titanium alloy), it means that the alloy contains 50 percent or more of the named metal (by mass).

(ii) If two metals are specified in the name (e.g., nickel-iron alloy), those metals are the two predominant elements in the alloy, and together they constitute 50 percent or more of the alloy (by mass).

Produce means—

(i) Atomization;

(ii) Sputtering; or

(iii) Final consolidation of non-melt derived metal powders.

Specialty metal means—

(i) Steel—

(A) With a maximum alloy content exceeding one or more of the following limits: Manganese, 1.65 percent; silicon, 0.60 percent; or copper, 0.60 percent; or

(B) Containing more than 0.25 percent of any of the following elements: Aluminum, chromium, cobalt, molybdenum, nickel, niobium (columbium), titanium, tungsten, or vanadium;

(ii) Metal alloys consisting of—

(A) Nickel or iron-nickel alloys that contain a total of alloying metals other than nickel and iron in excess of 10 percent; or

(B) Cobalt alloys that contain a total of alloying metals other than cobalt and iron in excess of 10 percent;

(iii) Titanium and titanium alloys; or

(iv) Zirconium and zirconium alloys.

Steel means an iron alloy that includes between .02 and 2 percent carbon and may include other elements.

(b) Any specialty metal delivered under this contract shall be melted or produced in the United States or its outlying areas.

(a) Definitions. As used in this clause—

Alloy means a metal consisting of a mixture of a basic metallic element and one or more metallic, or non-metallic, alloying elements.

(i) For alloys named by a single metallic element (e.g., titanium alloy), it means that the alloy contains 50 percent or more of the named metal (by mass).

(ii) If two metals are specified in the name (e.g., nickel-iron alloy), those metals are the two predominant elements in the alloy, and together they constitute 50 percent or more of the alloy (by mass).

Assembly means an item forming a portion of a system or subsystem that—

(i) Can be provisioned and replaced as an entity; and

(ii) Incorporates multiple, replaceable parts.

Commercial derivative military article means an item acquired by the Department of Defense that is or will be produced using the same production facilities, a common supply chain, and the same or similar production processes that are used for the production of articles predominantly used by the general public or by nongovernmental entities for purposes other than governmental purposes.

Commercially available off-the-shelf item—

(i) Means any item of supply that is—

(A) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation);

(B) Sold in substantial quantities in the commercial marketplace; and

(C) Offered to the Government, under this contract or a subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means any item supplied to the Government as part of an end item or of another component.

Electronic component means an item that operates by controlling the flow of electrons or other electrically charged particles in circuits, using interconnections of electrical devices such as resistors, inductors, capacitors, diodes, switches, transistors, or integrated circuits. The term does not include structural or mechanical parts of an assembly containing an electronic component, and does not include any high performance magnets that may be used in the electronic component.

End item means the final production product when assembled or completed and ready for delivery under a line item of this contract.

High performance magnet means a permanent magnet that obtains a majority of its magnetic properties from rare earth metals (such as samarium).

Produce means—

(i) Atomization;

(ii) Sputtering; or

(iii) Final consolidation of non-melt derived metal powders.

Qualifying country means any country listed in the definition of “Qualifying country” at 225.003 of the Defense Federal Acquisition Regulation Supplement (DFARS).

Specialty metal means—

(i) Steel—

(A) With a maximum alloy content exceeding one or more of the following limits: Manganese, 1.65 percent; silicon, 0.60 percent; or copper, 0.60 percent; or

(B) Containing more than 0.25 percent of any of the following elements: Aluminum, chromium, cobalt, molybdenum, nickel, niobium (columbium), titanium, tungsten, or vanadium;

(ii) Metal alloys consisting of—

(A) Nickel or iron-nickel alloys that contain a total of alloying metals other than nickel and iron in excess of 10 percent; or

(B) Cobalt alloys that contain a total of alloying metals other than cobalt and iron in excess of 10 percent;

(iii) Titanium and titanium alloys; or

(iv) Zirconium and zirconium alloys.

Steel means an iron alloy that includes between .02 and 2 percent carbon and may include other elements.

Subsystem means a functional grouping of items that combine to perform a major function within an end item, such as electrical power, attitude control, and propulsion.

(b) Restriction. Except as provided in paragraph (c) of this clause, any specialty metals incorporated in items delivered under this contract shall be melted or produced in the United States, its outlying areas, or a qualifying country.

(c) Exceptions. The restriction in paragraph (b) of this clause does not apply to—

(1) Electronic components.

(2)(i) Commercially available off-the-shelf (COTS) items, other than—

(A) Specialty metal mill products, such as bar, billet, slab, wire, plate, or sheet, that have not been incorporated into COTS end items, subsystems, assemblies, or components;

(B) Forgings or castings of specialty metals, unless the forgings or castings are incorporated into COTS end items, subsystems, or assemblies;

(C) Commercially available high performance magnets that contain specialty metal, unless such high performance magnets are incorporated into COTS end items or subsystems; and

(D) COTS fasteners, unless—

(1) The fasteners are incorporated into COTS end items, subsystems, assemblies, or components; or

(2) The fasteners qualify for the commercial product exception in paragraph (c)(3) of this clause.

(ii) A COTS item is considered to be “without modification” if it is not modified prior to contractual acceptance by the next higher tier in the supply chain.

(A) Specialty metals in a COTS item that was accepted without modification by the next higher tier are excepted from the restriction in paragraph (b) of this clause, and remain excepted, even if a piece of the COTS item subsequently is removed (e.g., the end is removed from a COTS screw or an extra hole is drilled in a COTS bracket).

(B) Specialty metals that were not contained in a COTS item upon acceptance, but are added to the COTS item after acceptance, are subject to the restriction in paragraph (b) of this clause (e.g., a special reinforced handle made of specialty metal is added to a COTS item).

(C) If two or more COTS items are combined in such a way that the resultant item is not a COTS item, only the specialty metals involved in joining the COTS items together are subject to the restriction in paragraph (b) of this clause (e.g., a COTS aircraft is outfitted with a COTS engine that is not the COTS engine normally provided with the aircraft).

(D) For COTS items that are normally sold in the commercial marketplace with various options, items that include such options are also COTS items. However, if a COTS item is offered to the Government with an option that is not normally offered in the commercial marketplace, that option is subject to the restriction in paragraph (b) of this clause (e.g. An aircraft is normally sold to the public with an option for installation kits. The Department of Defense requests a military-unique kit. The aircraft is still a COTS item, but the military-unique kit is not a COTS item and must comply with the restriction in paragraph (b) of this clause unless another exception applies).

(3) Fasteners that are commercial products, if the manufacturer of the fasteners certifies it will purchase, during the relevant calendar year, an amount of domestically melted or produced specialty metal, in the required form, for use in the production of fasteners for sale to the Department of Defense and other customers, that is not less than 50 percent of the total amount of the specialty metal that it will purchase to carry out the production of such fasteners for all customers.

(4) Items manufactured in a qualifying country.

(5) Specialty metals for which the Government has determined in accordance with DFARS 225.7003-3 that specialty metal melted or produced in the United States, its outlying areas, or a qualifying country cannot be acquired as and when needed in—

(i) A satisfactory quality;

(ii) A sufficient quantity; and

(iii) The required form. In accordance with 10 U.S.C. 4863(m)(4), the term “required form” in this clause refers to the form of the mill product, such as bar, billet, wire, slab, plate, or sheet, in the grade appropriate for the production of a finished end item to be delivered to the Government under this contract; or a finished component assembled into an end item to be delivered to the Government under this contract.

(6) End items containing a minimal amount of otherwise noncompliant specialty metals (i.e., specialty metals not melted or produced in the United States, an outlying area, or a qualifying country, that are not covered by one of the other exceptions in this paragraph (c)), if the total weight of such noncompliant metals does not exceed 2 percent of the total weight of all specialty metals in the end item, as estimated in good faith by the Contractor. This exception does not apply to high performance magnets containing specialty metals.

(d) Compliance for commercial derivative military articles. (1) As an alternative to the compliance required in paragraph (b) of this clause, the Contractor may purchase an amount of domestically melted or produced specialty metals in the required form, for use during the period of contract performance in the production of the commercial derivative military article and the related commercial article, if—

(i) The Contracting Officer has notified the Contractor of the items to be delivered under this contract that have been determined by the Government to meet the definition of “commercial derivative military article”; and

(ii) For each item that has been determined by the Government to meet the definition of “commercial derivative military article,” the Contractor has certified, as specified in the provision of the solicitation entitled “Commercial Derivative Military Article—Specialty Metals Compliance Certificate” (DFARS 252.225-7010), that the Contractor and its subcontractor(s) will enter into a contractual agreement or agreements to purchase an amount of domestically melted or produced specialty metal in the required form, for use during the period of contract performance in the production of each commercial derivative military article and the related commercial article, that is not less than the Contractor's good faith estimate of the greater of—

(A) An amount equivalent to 120 percent of the amount of specialty metal that is required to carry out the production of the commercial derivative military article (including the work performed under each subcontract); or

(B) An amount equivalent to 50 percent of the amount of specialty metal that will be purchased by the Contractor and its subcontractors for use during such period in the production of the commercial derivative military article and the related commercial article.

(2) For the purposes of this alternative, the amount of specialty metal that is required to carry out production of the commercial derivative military article includes specialty metal contained in any item, including COTS items.

(e) Subcontracts. (1) The Contractor shall exclude and reserve paragraph (d) and this paragraph (e)(1) when flowing down this clause to subcontracts.

(2) The Contractor shall insert paragraphs (a) through (c) and this paragraph (e)(2) of this clause in subcontracts, including subcontracts for commercial products, that are for items containing specialty metals to ensure compliance of the end products that the Contractor will deliver to the Government. When inserting this clause in subcontracts, the Contractor shall—

(i) Modify paragraph (c)(6) of this clause only as necessary to facilitate management of the minimal content exception at the prime contract level. The minimal content exception does not apply to specialty metals contained in high-performance magnets; and

(ii) Not further alter the clause other than to identify the appropriate parties.

(a) Definitions. Commercial derivative military article, commercially available off-the-shelf item, produce, required form, and specialty metal, as used in this provision, have the meanings given in the clause of this solicitation entitled “Restriction on Acquisition of Certain Articles Containing Specialty Metals” (DFARS 252.225-7009).

(b) The offeror shall list in this paragraph any commercial derivative military articles it intends to deliver under any contract resulting from this solicitation using the alternative compliance for commercial derivative military articles, as specified in paragraph (d) of the clause of this solicitation entitled “Restriction on Acquisition of Certain Articles Containing Specialty Metals” (DFARS 252.225-7009). The offeror's designation of an item as a “commercial derivative military article” will be subject to Government review and approval.

(c) If the offeror has listed any commercial derivative military articles in paragraph (b) of this provision, the offeror certifies that, if awarded a contract as a result of this solicitation, and if the Government approves the designation of the listed item(s) as commercial derivative military articles, the offeror and its subcontractor(s) will demonstrate that individually or collectively they have entered into a contractual agreement or agreements to purchase an amount of domestically melted or produced specialty metal in the required form, for use during the period of contract performance in the production of each commercial derivative military article and the related commercial article, that is not less than the Contractor's good faith estimate of the greater of—

(1) An amount equivalent to 120 percent of the amount of specialty metal that is required to carry out the production of the commercial derivative military article (including the work performed under each subcontract); or

(2) An amount equivalent to 50 percent of the amount of specialty metal that will be purchased by the Contractor and its subcontractors for use during such period in the production of the commercial derivative military article and the related commercial article.

(d) For the purposes of this provision, the amount of specialty metal that is required to carry out the production of the commercial derivative military article includes specialty metal contained in any item, including commercially available off-the-shelf items, incorporated into such commercial derivative military articles.

Supercomputers delivered under this contract shall be manufactured in the United States or its outlying areas.

(a) Definitions. As used in this clause—

Component means any item supplied to the Government as part of an end product or of another component.

End product means supplies delivered under a line item of this contract.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Structural component of a tent—

(1) Means a component that contributes to the form and stability of the tent (e.g., poles, frames, flooring, guy ropes, pegs); and

(2) Does not include equipment such as heating, cooling, or lighting.

United States means the 50 States, the District of Columbia, and outlying areas.

U.S.-flag vessel means a vessel of the United States or belonging to the United States, including any vessel registered or having national status under the laws of the United States.

(b) The Contractor shall deliver under this contract only such of the following items, either as end products or components, that have been grown, reprocessed, reused, or produced in the United States:

(1) Food.

(2) Clothing and the materials and components thereof, other than sensors, electronics, or other items added to, and not normally associated with, clothing and the materials and components thereof. Clothing includes items such as outerwear, headwear, underwear, nightwear, footwear, hosiery, handwear, belts, badges, and insignia.

(3)(i) Tents and structural components of tents;

(ii) Tarpaulins; or

(iii) Covers.

(4) Cotton and other natural fiber products.

(5) Woven silk or woven silk blends.

(6) Spun silk yarn for cartridge cloth.

(7) Synthetic fabric, and coated synthetic fabric, including all textile fibers and yarns that are for use in such fabrics.

(8) Canvas products.

(9) Wool (whether in the form of fiber or yarn or contained in fabrics, materials, or manufactured articles).

(10) Any item of individual equipment (Federal Supply Class 8465) manufactured from or containing fibers, yarns, fabrics, or materials listed in this paragraph (b).

(c) This clause does not apply—

(1) To items listed in section 25.104(a) of the Federal Acquisition Regulation, or other items for which the Government has determined that a satisfactory quality and sufficient quantity cannot be acquired as and when needed at U.S. market prices;

(2) To incidental amounts of cotton, other natural fibers, or wool incorporated in an end product, for which the estimated value of the cotton, other natural fibers, or wool—

(i) Is not more than 10 percent of the total price of the end product; and

(ii) Does not exceed the threshold at Defense Federal Acquisition Regulation Supplement 225.7002-2(a);

(3) To waste and byproducts of cotton or wool fiber for use in the production of propellants and explosives;

(4) To foods, other than fish, shellfish, or seafood, that have been manufactured or processed in the United States, regardless of where the foods (and any component if applicable) were grown or produced. Fish, shellfish, or seafood manufactured or processed in the United States and fish, shellfish, or seafood contained in foods manufactured or processed in the United States shall be provided in accordance with paragraph (d) of this clause;

(5) To chemical warfare protective clothing produced in a qualifying country; or

(6) To fibers and yarns that are for use in synthetic fabric or coated synthetic fabric (but does apply to the synthetic or coated synthetic fabric itself), if—

(i) The fabric is to be used as a component of an end product that is not a textile product. Examples of textile products, made in whole or in part of fabric, include—

(A) Draperies, floor coverings, furnishings, and bedding (Federal Supply Group 72, Household and Commercial Furnishings and Appliances);

(B) Items made in whole or in part of fabric in Federal Supply Group 83, Textile/leather/furs/apparel/findings/ tents/flags, or Federal Supply Group 84, Clothing, Individual Equipment and Insignia;

(C) Upholstered seats (whether for household, office, or other use); and

(D) Parachutes (Federal Supply Class 1670); or

(ii) The fibers and yarns are para-aramid fibers and continuous filament para-aramid yarns manufactured in a qualifying country.

(d)(1) Fish, shellfish, and seafood delivered under this contract, or contained in foods delivered under this contract—

(i) Shall be taken from the sea by U.S.-flag vessels; or

(ii) If not taken from the sea, shall be obtained from fishing within the United States; and

(2) Any processing or manufacturing of the fish, shellfish, or seafood shall be performed on a U.S.-flag vessel or in the United States.

When submitting a request for payment using a cost voucher, the Contractor shall—

(a) Identify the contract line item(s) on the payment request that reasonably reflect contract work performance; and

(b) Separately identify a payment amount for each contract line item included in the payment request.

(a) Definitions. As used in this clause—

“Component” means any item supplied to the Government as part of an end product or of another component.

Customs territory of the United States means the 50 States, the District of Columbia, and Puerto Rico.

Eligible product means—

(1) Designated country end product, as defined in the Trade Agreements (either basic or alternate) clause of this contract;

(2) Free Trade Agreement country end product, other than a Bahraini end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, as defined in the Buy American—Free Trade Agreements—Balance of Payments Program (either basic or alternate II) clause of this contract; or

(3) Free Trade Agreement country end product other than a Bahraini end product, Korean end product, Moroccan end product, Panamanian end product, or Peruvian end product, as defined in the Buy American—Free Trade Agreements—Balance of Payments Program (either alternate IV or alternate V) clause of this contract.

Qualifying country and qualifying country end product have the meanings given in the Trade Agreements clause, the Buy American and Balance of Payments Program clause, or the Buy American —Free Trade Agreements—Balance of Payments Program clause of this contract, basic or alternate.

(b) Except as provided in paragraph (i) of this clause, or unless supplies were imported into the customs territory of the United States before the date of this contract or the applicable subcontract, the price of this contract shall not include any amount for duty on—

(1) End items that are eligible products or qualifying country end products;

(2) Components (including, without limitation, raw materials and intermediate assemblies) produced or made in qualifying countries, that are to be incorporated in U.S.-made end products to be delivered under this contract; or

(3) Other supplies for which the Contractor estimates that duty will exceed $300 per shipment into the customs territory of the United States.

(c) The Contractor shall—

(1) Claim duty-free entry only for supplies that the Contractor intends to deliver to the Government under this contract, either as end items or components of end items; and

(2) Pay duty on supplies, or any portion thereof, that are diverted to nongovernmental use, other than—

(i) Scrap or salvage; or

(ii) Competitive sale made, directed, or authorized by the Contracting Officer.

(d) Except as the Contractor may otherwise agree, the Government will execute duty-free entry certificates and will afford such assistance as appropriate to obtain the duty-free entry of supplies—

(1) For which no duty is included in the contract price in accordance with paragraph (b) of this clause; and

(2) For which shipping documents bear the notation specified in paragraph (e) of this clause.

(e) For foreign supplies for which the Government will issue duty-free entry certificates in accordance with this clause, shipping documents submitted to Customs shall—

(1) Consign the shipments to the appropriate—

(i) Military department in care of the Contractor, including the Contractor's delivery address; or

(ii) Military installation; and

(2) Include the following information:

(i) Prime contract number and, if applicable, delivery order number.

(ii) Number of the subcontract for foreign supplies, if applicable.

(iii) Identification of the carrier.

(iv)(A) For direct shipments to a U.S. military installation, the notation: “UNITED STATES GOVERNMENT, DEPARTMENT OF DEFENSE Duty-Free Entry to be claimed pursuant to Section XXII, Chapter 98, Subchapter VIII, Item 9808.00.30 of the Harmonized Tariff Schedule of the United States. Upon arrival of shipment at the appropriate port of entry, District Director of Customs, please release shipment under 19 CFR part 142 and notify Commander, Defense Contract Management Agency (DCMA), St. Louis, MO, ATTN: Duty Free Entry Team, 1222 Spruce Street, Room 9.300, St. Louis, MO 63103-2812, for execution of Customs Form 7501, 7501A, or 7506 and any required duty-free entry certificates.”

(B) If the shipment will be consigned to other than a military installation, e.g., a domestic contractor's plant, the shipping document notation shall be altered to include the name and address of the contractor, agent, or broker who will notify Commander, DCMA New York, for execution of the duty-free entry certificate. (If the shipment will be consigned to a contractor's plant and no duty-free entry certificate is required due to a trade agreement, the Contractor shall claim duty-free entry under the applicable trade agreement and shall comply with the U.S. Customs Service requirements. No notification to Commander, DCMA New York, is required.)

(v) Gross weight in pounds (if freight is based on space tonnage, state cubic feet in addition to gross shipping weight).

(vi) Estimated value in U.S. dollars.

(vii) Activity address number of the contract administration office administering the prime contract, e.g., for DCMA Dayton, S3605A.

(f) Preparation of customs forms. (1)(i) Except for shipments consigned to a military installation, the Contractor shall—

(A) Prepare any customs forms required for the entry of foreign supplies into the customs territory of the United States in connection with this contract; and

(B) Submit the completed customs forms to the District Director of Customs, with a copy to DCMA NY for execution of any required duty-free entry certificates.

(ii) Shipments consigned directly to a military installation will be released in accordance with sections 10.101 and 10.102 of the U.S. Customs regulations.

(2) For shipments containing both supplies that are to be accorded duty-free entry and supplies that are not, the Contractor shall identify on the customs forms those items that are eligible for duty-free entry.

(g) The Contractor shall—

(1) Prepare (if the Contractor is a foreign supplier), or shall instruct the foreign supplier to prepare, a sufficient number of copies of the bill of lading (or other shipping document) so that at least two of the copies accompanying the shipment will be available for use by the District Director of Customs at the port of entry;

(2) Consign the shipment as specified in paragraph (e) of this clause; and

(3) Mark on the exterior of all packages—

(i) “UNITED STATES GOVERNMENT, DEPARTMENT OF DEFENSE”; and

(ii) The activity address number of the contract administration office administering the prime contract.

(h) The Contractor shall notify the Administrative Contracting Officer (ACO) in writing of any purchase of eligible products or qualifying country supplies to be accorded duty-free entry, that are to be imported into the customs territory of the United States for delivery to the Government or for incorporation in end items to be delivered to the Government. The Contractor shall furnish the notice to the ACO immediately upon award to the supplier and shall include in the notice—

(1) The Contractor's name, address, and Commercial and Government Entity (CAGE) code;

(2) Prime contract number and, if applicable, delivery order number;

(3) Total dollar value of the prime contract or delivery order;

(4) Date of the last scheduled delivery under the prime contract or delivery order;

(5) Foreign supplier's name and address;

(6) Number of the subcontract for foreign supplies;

(7) Total dollar value of the subcontract for foreign supplies;

(8) Date of the last scheduled delivery under the subcontract for foreign supplies;

(9) List of items purchased;

(10) An agreement that the Contractor will pay duty on supplies, or any portion thereof, that are diverted to nongovernmental use other than—

(i) Scrap or salvage; or

(ii) Competitive sale made, directed, or authorized by the Contracting Officer;

(11) Country of origin; and

(12) Scheduled delivery date(s).

(i) This clause does not apply to purchases of eligible products or qualifying country supplies in connection with this contract if—

(1) The supplies are identical in nature to supplies purchased by the Contractor or any subcontractor in connection with its commercial business; and

(2) It is not economical or feasible to account for such supplies so as to ensure that the amount of the supplies for which duty-free entry is claimed does not exceed the amount purchased in connection with this contract.

(j) The Contractor shall—

(1) Insert the substance of this clause, including this paragraph (j), in all subcontracts for—

(i) Qualifying country components; or

(ii) Nonqualifying country components for which the Contractor estimates that duty will exceed $200 per unit;

(2) Require subcontractors to include the number of this contract on all shipping documents submitted to Customs for supplies for which duty-free entry is claimed pursuant to this clause; and

(3) Include in applicable subcontracts—

(i) The name and address of the ACO for this contract;

(ii) The name, address, and activity address number of the contract administration office specified in this contract; and

(iii) The information required by paragraphs (h)(1), (2), and (3) of this clause.

Hand or measuring tools delivered under this contract shall be produced in the United States or its outlying areas.

(a) Definitions. As used in this clause—

(1) Bearing component means the bearing element, retainer, inner race, or outer race.

(2) Component, other than a bearing component, means any item supplied to the Government as part of an end product or of another component.

(3) End product means supplies delivered under a line item of this contract.

(b) Except as provided in paragraph (c) of this clause—

(1) Each ball and roller bearing delivered under this contract shall be manufactured in the United States, its outlying areas, or Canada; and

(2) For each ball or roller bearing, the cost of the bearing components manufactured in the United States, its outlying areas, or Canada shall exceed 50 percent of the total cost of the bearing components of that ball or roller bearing.

(c) The restriction in paragraph (b) of this clause does not apply to ball or roller bearings that are acquired as—

(1) Commercial components of an other than commercial end product; or

(2) Commercial or other than commercial components of a commercial component of an other than commercial end product.

(d) The restriction in paragraph (b) of this clause may be waived upon request from the Contractor in accordance with subsection 225.7009-4 of the Defense Federal Acquisition Regulation Supplement.

(e) If this contract includes DFARS clause 252.225-7009, Restriction on Acquisition of Certain Articles Containing Specialty Metals, all bearings that contain specialty metals, as defined in that clause, must meet the requirements of that clause.

(f) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (f), in all subcontracts, except those for—

(1) Commercial products; or

(2) Items that do not contain ball or roller bearings.

(a) Definitions. As used in this clause—

Bahraini photovoltaic device means a photovoltaic device that—

(1) Is wholly manufactured in Bahrain; or

(2) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of Bahrain.

Caribbean Basin country photovoltaic device means a photovoltaic device that—

(1) Is wholly manufactured in a Caribbean Basin country; or

(2) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of a Caribbean Basin country.

Designated country means—

(1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, North Macedonia, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);

(2) A Free Trade Agreement country (Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).

Designated country photovoltaic device means a WTO GPA country photovoltaic device, a Free Trade Agreement country photovoltaic device, a least developed country photovoltaic device, or a Caribbean Basin country photovoltaic device.

Domestic photovoltaic device means a photovoltaic device that is manufactured in the United States.

Foreign photovoltaic device means a photovoltaic device other than a domestic photovoltaic device.

Free Trade Agreement country means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

Free Trade Agreement country photovoltaic device means a photovoltaic device that—

(1) Is wholly manufactured in a Free Trade Agreement country; or

(2) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of a Free Trade Agreement country.

Korean photovoltaic device means a photovoltaic device that—

(1) Is wholly manufactured in Korea; or

(2) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in Korea (Republic of) into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of Korea (Republic of).

Least developed country photovoltaic device means a photovoltaic device that—

(1) Is wholly manufactured in a least developed country; or

(2) In the case of a photovoltaic device thatconsists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of a least developed country.

Moroccan photovoltaic device means a photovoltaic device that—

(1) Is wholly manufactured in Morocco; or

(2) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of Morocco.

Panamanian photovoltaic device means a photovoltaic device that—

(1) Is wholly manufactured in Panama; or

(2) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of Panama.

Peruvian photovoltaic device means a photovoltaic device that—

(1) Is wholly manufactured in Peru; or

(2) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of Peru.

Photovoltaic device means a device that converts light directly into electricity through a solid-state, semiconductor process.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country photovoltaic device means a photovoltaic device manufactured in a qualifying country.

United States means the 50 States, the District of Columbia, and outlying areas.

U.S.-made photovoltaic device means a photovoltaic device that—

(1) Is manufactured in the United States; or

(2) Is substantially transformed in the United States into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of the United States.

WTO GPA country photovoltaic device means a photovoltaic device that—

(1) Is wholly manufactured in a WTO GPA country; or

(2) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of a WTO GPA country.

(b) This clause implements section 846 of the National Defense Authorization Act for Fiscal Year 2011 (Pub. L. 111-383)).

(c) Restriction. If the Contractor specified in its offer in the Photovoltaic Devices—Certificate provision of the solicitation that the estimated value of the photovoltaic devices to be utilized in performance of this contract would be—

(1) More than the micro-purchase threshold but less than $100,000, then the Contractor shall utilize only domestic photovoltaic devices unless, in its offer, it specified utilization of qualifying country or other foreign photovoltaic devices in paragraph (d)(2) of the Photovoltaic Devices—Certificate provision of the solicitation.

(2) $100,000 or more but less than $102,280, then the Contractor shall utilize under this contract only domestic photovoltaic devices, unless, in its offer, it specified utilization of Free Trade Agreement country photovoltaic devices (other than Bahraini, Korean, Moroccan, Panamanian, or Peruvian photovoltaic devices), qualifying country photovoltaic devices, or other foreign photovoltaic devices in paragraph (d)(4) of the Photovoltaic Devices—Certificate provision of the solicitation. If the Contractor certified in its offer that it will utilize a Free Trade Agreement country photovoltaic device (other than a Bahraini, Korean, Moroccan, Panamanian, or Peruvian photovoltaic device) or a qualifying country photovoltaic device, then the Contractor shall utilize a Free Trade Agreement country photovoltaic device (other than a Bahraini, Korean, Moroccan, Panamanian, or Peruvian photovoltaic device) or a qualifying country photovoltaic device; or, at the Contractor's option, a domestic photovoltaic device;

(3) $100,000 or more but less than $174,000, then the Contractor shall utilize under this contract only domestic photovoltaic devices, unless, in its offer it specified utilization of Free Trade Agreement country photovoltaic devices (other than Bahraini, Moroccan, Panamanian, or Peruvian photovoltaic devices), qualifying country photovoltaic devices, or other foreign photovoltaic devices in paragraph (d)(5) of the Photovoltaic Devices—Certificate provision of the solicitation. If the Contractor certified in its offer that it will utilize a Free Trade Agreement country photovoltaic device (other than a Bahraini, Moroccan, Panamanian, or Peruvian photovoltaic device) or a qualifying country photovoltaic device, then the Contractor shall utilize a Free Trade Agreement country photovoltaic device (other than a Bahraini, Moroccan, Panamanian, or Peruvian photovoltaic device) or a qualifying country photovoltaic device; or, at the Contractor's option, a domestic photovoltaic device; or

(4) $174,000 or more, then the Contractor shall utilize under this contract only U.S.-made, designated country, or qualifying country photovoltaic devices.

(a) Definitions. “Bahraini photovoltaic device,” “Caribbean Basin photovoltaic device,” “designated country,” “designated country photovoltaic device,” “domestic photovoltaic device,” “foreign photovoltaic device,” “Free Trade Agreement country,” “Free Trade Agreement photovoltaic device,” “Korean photovoltaic device,” “least developed country photovoltaic device,” “Moroccan photovoltaic device,” “Panamanian photovoltaic device,” “Peruvian photovoltaic device,” “photovoltaic device,” “qualifying country,” “qualifying country photovoltaic device,” “United States,” “U.S.-made photovoltaic device,” and “WTO GPA country photovoltaic device” have the meanings given in the Photovoltaic Devices clause of this solicitation.

(b) Restrictions. The following restrictions apply, depending on the estimated aggregate value of photovoltaic devices to be utilized under a resultant contract:

(1) If more than the micro-purchase threshold but less than $174,000, then the Government will not accept an offer specifying the use of other foreign photovoltaic devices in paragraph (d)(2)(ii), (d)(3)(ii), (d)(4)(ii), or (d)(5)(ii) of this provision, unless the Offeror documents to the satisfaction of the Contracting Officer that the price of the foreign photovoltaic device plus 50 percent is less than the price of a comparable domestic photovoltaic device.

(2) If $174,000 or more, then the Government will consider only offers that utilize photovoltaic devices that are U.S.-made, qualifying country, or designated country photovoltaic devices.

(c) Country in which a designated country photovoltaic device was wholly manufactured or was substantially transformed. If the estimated value of the photovoltaic devices to be utilized under a resultant contract exceeds $102,280, the Offeror's certification that such photovoltaic device (e.g., solar panel) is a designated country photovoltaic device shall be consistent with country of origin determinations by the U.S. Customs and Border Protection with regard to importation of the same or similar photovoltaic devices into the United States. If the Offeror is uncertain as to what the country of origin would be determined to be by the U.S. Customs and Border Protection, the Offeror shall request a determination from U.S. Customs and Border Protection. (See https://www.cbp.gov/trade/rulings.)

(d) Certification and identification of country of origin. [The Offeror shall check the block and fill in the blank for one of the following paragraphs, based on the estimated value and the country of origin of photovoltaic devices to be utilized in performance of the contract:]

(1) No photovoltaic devices will be utilized in performance of the contract, or such photovoltaic devices have an estimated value that does not exceed the micro-purchase threshold.

(2) If more than the micro-purchase threshold but less than $100,000—

__(i) The Offeror certifies that each photovoltaic device to be utilized in performance of the contract is a domestic photovoltaic device;

__(ii) The Offeror certifies that each photovoltaic device to be utilized in performance of the contract is a qualifying country photovoltaic device [Offeror to specify country of origin___]; or

__(iii) The foreign (other than qualifying country) photovoltaic devices to be utilized in performance of the contract are the product of ___. [Offeror to specify country of origin, if known, and provide documentation that the cost of a domestic photovoltaic device would be unreasonable in comparison to the cost of the proposed foreign photovoltaic device, i.e., that the price of the foreign photovoltaic device plus 50 percent is less than the price of a comparable domestic photovoltaic device.]

(3) If less than $100,000—

__(i) The Offeror certifies that each photovoltaic device to be utilized in performance of the contract is a domestic photovoltaic device;

__(ii) The Offeror certifies that each photovoltaic device to be utilized in performance of the contract is a qualifying country photovoltaic device [Offeror to specify country of origin___]; or

__(iii) The foreign photovoltaic devices to be utilized in performance of the contract are the product of___. [Offeror to specify country of origin, if known, and provide documentation that the cost of a domestic photovoltaic device would be unreasonable in comparison to the cost of the proposed foreign photovoltaic device, i.e., that the price of the foreign photovoltaic device plus 50 percent is less than the price of a comparable domestic photovoltaic device.]

(4) If $100,000 or more but less than $102,280—

__(i) The Offeror certifies that each photovoltaic device to be utilized in performance of the contract is a domestic photovoltaic device;

__(ii) The Offeror certifies that each photovoltaic device to be utilized in performance of the contract is a Free Trade Agreement country photovoltaic device (other than a Bahraini, Korean, Moroccan, Panamanian, or Peruvian photovoltaic device) or a qualifying country photovoltaic device [Offeror to specify country of origin___]; or

__(iii) The offered foreign photovoltaic devices (other than those from countries listed in paragraph (d)(4)(ii) of this provision) are the product of ___. [Offeror to specify country of origin, if known, and provide documentation that the cost of a domestic photovoltaic device would be unreasonable in comparison to the cost of the proposed foreign photovoltaic device, i.e. that the price of the foreign photovoltaic device plus 50 percent is less than the price of a comparable domestic photovoltaic device.]

(5) If $100,000 or more but less than $174,000—

__(i) The Offeror certifies that each photovoltaic device to be utilized in performance of the contract is a domestic photovoltaic device;

__(ii) The Offeror certifies that each photovoltaic device to be utilized in performance of the contract is a Free Trade Agreement country photovoltaic device (other than a Bahraini, Moroccan, Panamanian, or Peruvian photovoltaic device) or a qualifying country photovoltaic device [Offeror to specify country of origin___]; or

__(iii) The offered foreign photovoltaic devices (other than those from countries listed in paragraph (d)(5)(ii) of this provision) are the product of ___. Offeror to specify country of origin, if known, and provide documentation that the cost of a domestic photovoltaic device would be unreasonable in comparison to the cost of the proposed foreign photovoltaic device, i.e., that the price of the foreign photovoltaic device plus 50 percent is less than the price of a comparable domestic photovoltaic device.]

(6) If $174,000 or more, the Offeror certifies that each photovoltaic device to be used in performance of the contract is—

__(i) A U.S.-made photovoltaic device; or

__(ii) A designated country photovoltaic device or a qualifying country photovoltaic device. [Offeror to specify country of origin___.]

(a) Definition. As used in this clause—

Component means an article, material, or supply incorporated directly into an end product.

(b) Welded shipboard anchor and mooring chain delivered under this contract—

(1) Shall be manufactured in the United States or its outlying areas, including cutting, heat treating, quality control, testing, and welding (both forging and shot blasting process); and

(2) The cost of the components manufactured in the United States or its outlying areas shall exceed 50 percent of the total cost of components.

(c) The Contractor may request a waiver of this restriction if adequate domestic supplies meeting the requirements in paragraph (b) of this clause are not available to meet the contract delivery schedule.

(d) The Contractor shall insert the substance of this clause, including this paragraph (d), in all subcontracts for items containing welded shipboard anchor and mooring chain.

(a) Definitions. Designated country end product, nondesignated country end product, qualifying country end product, and U.S.-made end product, as used in this provision have the meanings given in the Trade Agreements—Basic clause of this solicitation.

(b) Evaluation. The Government—

(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) Will consider only offers of end products that are U.S.-made, qualifying country, or designated country end products unless—

(i) There are no offers of such end products;

(ii) The offers of such end products are insufficient to fulfill the Government's requirements; or

(iii) A national interest waiver has been granted.

(c) Certification and identification of country of origin. (1) For all line items subject to the Trade Agreements—Basic of this solicitation, the offeror certifies that each end product to be delivered under this contract, except those listed in paragraph (c)(2) of this provision, is a U.S.-made, qualifying country, or designated country end product.

(2) The following supplies are other nondesignated country end products:

(a) Definitions. Designated country end product, nondesignated country end product, qualifying country end product, South Caucasus/Central and South Asian (SC/CASA) state, South Caucasus/Central and South Asian (SC/CASA) state end product, and U.S.-made end product, as used in this provision, have the meanings given in the Trade Agreements—Alternate I clause of this solicitation.

(b) Evaluation. The Government—

(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) Will consider only offers of end products that are U.S.-made, qualifying country, SC/CASA state, or designated country end products unless—

(i) There are no offers of such end products;

(ii) The offers of such end products are insufficient to fulfill the Government's requirements; or

(iii) A national interest waiver has been granted.

(c) Certification and identification of country of origin.

(1) For all line items subject to the Trade Agreement—Alternate I clause of this solicitation, the offeror certifies that each end product to be delivered under this contract, except those listed in paragraph (c)(2)(ii) of this provision, is a U.S.-made, qualifying country, SC/CASA state, or designated country end product.

(2)(i) The following supplies are SC/CASA state end products:

(ii) The following are other nondesignated country end products:

(a) Definitions. As used in this clause—

Caribbean Basin country end product—

(1) Means an article that—

(i) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself; and

(2) Excludes products, other than petroleum and any product derived from petroleum, that are not granted duty-free treatment under the Caribbean Basin Economic Recovery Act (19 U.S.C. 2703(b)). These exclusions presently consist of—

(i) Textiles, apparel articles, footwear, handbags, luggage, flat goods, work gloves, leather wearing apparel, and handloomed, handmade, or folklore articles that are not granted duty-free status in the Harmonized Tariff Schedule of the United States (HTSUS);

(ii) Tuna, prepared or preserved in any manner in airtight containers; and

(iii) Watches and watch parts (including cases, bracelets, and straps) of whatever type, including, but not limited to, mechanical, quartz digital, or quartz analog, if such watches or watch parts contain any material that is the product of any country to which the HTSUS column 2 rates of duty (HTSUS General Note 3(b)) apply.

Commercially available off-the-shelf (COTS) item. (1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation);

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Designated country means—

(1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, North Macedonia, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);

(2) A Free Trade Agreement country (Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).

Designated country end product means a WTO GPA country end product, a Free Trade Agreement country end product, a least developed country end product, or a Caribbean Basin country end product.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Free Trade Agreement country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Least developed country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a least developed country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Nondesignated country end product means any end product that is not a U.S.-made end product or a designated country end product.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(ii) The end product is a COTS item.

United States means the 50 States, the District of Columbia, and outlying areas.

U.S.-made end product means an article that—

(1) Is mined, produced, or manufactured in the United States; or

(2) Is substantially transformed in the United States into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed.

WTO GPA country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a WTO GPA country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only U.S.-made, qualifying country, or designated country end products unless—

(1) In its offer, the Contractor specified delivery of other nondesignated country end products in the Trade Agreements Certificate provision of the solicitation; and

(2)(i) Offers of U.S.-made, qualifying country, or designated country end products from responsive, responsible offerors are either not received or are insufficient to fill the Government's requirements; or

(ii) A national interest waiver has been granted.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(e) The HTSUS is available at http://www.usitc.gov/tata/hts/bychapter/index.htm. The following sections of the HTSUS provide information regarding duty-free status of articles specified in the definition of “Caribbean Basin country end product” within paragraph (a) of this clause:

(1) General Note 3(c), Products Eligible for Special Tariff Treatment.

(2) General Note 17, Products of Countries Designated as Beneficiary Countries Under the United States-Caribbean Basin Trade Partnership Act of 2000.

(3) Section XXII, Chapter 98, Subchapter II, Articles Exported and Returned, Advanced or Improved Abroad, U.S. Note 7(b).

(4) Section XXII, Chapter 98, Subchapter XX, Goods Eligible for Special Tariff Benefits Under the United States-Caribbean Basin Trade Partnership Act.

(a) Definitions. As used in this clause—Caribbean Basin country end product—

(1) Means an article that—

(i) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself; and

(2) Excludes products, other than petroleum and any product derived from petroleum, that are not granted duty-free treatment under the Caribbean Basin Economic Recovery Act (19 U.S.C. 2703(b)). These exclusions presently consist of—

(i) Textiles, apparel articles, footwear, handbags, luggage, flat goods, work gloves, leather wearing apparel, and handloomed, handmade, or folklore articles that are not granted duty-free status in the Harmonized Tariff Schedule of the United States (HTSUS);

(ii) Tuna, prepared or preserved in any manner in airtight containers; and

(iii) Watches and watch parts (including cases, bracelets, and straps) of whatever type, including, but not limited to, mechanical, quartz digital, or quartz analog, if such watches or watch parts contain any material that is the product of any country to which the HTSUS column 2 rates of duty (HTSUS General Note 3(b)) apply.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of commercial product in section 2.101 of the Federal Acquisition Regulation);

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Designated country means—

(1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, North Macedonia, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);

(2) A Free Trade Agreement country (Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, East Timor, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Maldives, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, Tanzania, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).

Designated country end product means a WTO GPA country end product, a Free Trade Agreement country end product, a least developed country end product, or a Caribbean Basin country end product.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Free Trade Agreement country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Least developed country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a least developed country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Nondesignated country end product means any end product that is not a U.S.-made end product or a designated country end product.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(ii) The end product is a COTS item.

South Caucasus/Central and South Asian (SC/CASA) state means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

South Caucasus/Central and South Asian (SC/CASA) state end product means an article that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

United States means the 50 States, the District of Columbia, and outlying areas.

U.S.-made end product means an article that—

(1) Is mined, produced, or manufactured in the United States; or

(2) Is substantially transformed in the United States into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed.

WTO GPA country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a WTO GPA country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only U.S.-made, qualifying country, SC/CASA state, or designated country end products unless—

(1) In its offer, the Contractor specified delivery of other nondesignated country end products in the Trade Agreements Certificate provision of the solicitation; and

(2)(i) Offers of U.S.-made, qualifying country, SC/CASA state, or designated country end products from responsive, responsible offerors are either not received or are insufficient to fill the Government's requirements; or

(ii) A national interest waiver has been granted.

(d) If the Contractor is from an SC/CASA state, the Contractor shall inform its government of its participation in this acquisition and that it generally will not have such opportunity in the future unless its government provides reciprocal procurement opportunities to U.S. products and services and suppliers of such products and services.

(e) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(f) The HTSUS is available at http://www.usitc.gov/tata/hts/bychapter/index.htm. The following sections of the HTSUS provide information regarding duty-free status of articles specified in the definition of “Caribbean Basin country end product” within paragraph (a) of this clause:

(1) General Note 3(c), Products Eligible for Special Tariff Treatment.

(2) General Note 17, Products of Countries Designated as Beneficiary Countries Under the United States—Caribbean Basin Trade Partnership Act of 2000.

(3) Section XXII, Chapter 98, Subchapter II, Articles Exported and Returned, Advanced or Improved Abroad, U.S. Note 7(b).

(4) Section XXII, Chapter 98, Subchapter XX, Goods Eligible for Special Tariff Benefits Under the United States—Caribbean Basin Trade Partnership Act.

Alternate III. As prescribed in 225.1101(6) and (6)(iii), use the following clause, which includes, in the definition of “qualifying country end product” at paragraph (2)(i), the domestic content threshold that will apply to the entire contract period of performance.

(a) Definitions. As used in this clause—

Caribbean Basin country end product—

(1) Means an article that—

(i) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself; and

(2) Excludes products, other than petroleum and any product derived from petroleum, that are not granted duty-free treatment under the Caribbean Basin Economic Recovery Act (19 U.S.C. 2703(b)). These exclusions presently consist of—

(i) Textiles, apparel articles, footwear, handbags, luggage, flat goods, work gloves, leather wearing apparel, and handloomed, handmade, or folklore articles that are not granted duty-free status in the Harmonized Tariff Schedule of the United States (HTSUS);

(ii) Tuna, prepared or preserved in any manner in airtight containers; and

(iii) Watches and watch parts (including cases, bracelets, and straps) of whatever type, including, but not limited to, mechanical, quartz digital, or quartz analog, if such watches or watch parts contain any material that is the product of any country to which the HTSUS column 2 rates of duty (HTSUS General Note 3(b)) apply.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation);

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

“Designated country” means—

(1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, North Macedonia, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);

(2) A Free Trade Agreement country (Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).

Designated country end product means a WTO GPA country end product, a Free Trade Agreement country end product, a least developed country end product, or a Caribbean Basin country end product.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Free Trade Agreement country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Least developed country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a least developed country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Nondesignated country end product means any end product that is not a U.S.-made end product or a designated country end product.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(ii) The end product is a COTS item.

United States means the 50 States, the District of Columbia, and outlying areas.

U.S.-made end product means an article that—

(1) Is mined, produced, or manufactured in the United States; or

(2) Is substantially transformed in the United States into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed.

WTO GPA country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a WTO GPA country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only U.S.-made, qualifying country, or designated country end products unless—

(1) In its offer, the Contractor specified delivery of other nondesignated country end products in the Trade Agreements Certificate provision of the solicitation; and

(2)(i) Offers of U.S.-made, qualifying country, or designated country end products from responsive, responsible offerors are either not received or are insufficient to fill the Government's requirements; or

(ii) A national interest waiver has been granted.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(e) The HTSUS is available at http://www.usitc.gov/tata/hts/bychapter/index.htm. The following sections of the HTSUS provide information regarding duty-free status of articles specified in the definition of “Caribbean Basin country end product” within paragraph (a) of this clause:

(1) General Note 3(c), Products Eligible for Special Tariff Treatment.

(2) General Note 17, Products of Countries Designated as Beneficiary Countries Under the United States-Caribbean Basin Trade Partnership Act of 2000.

(3) Section XXII, Chapter 98, Subchapter II, Articles Exported and Returned, Advanced or Improved Abroad, U.S. Note 7(b).

(4) Section XXII, Chapter 98, Subchapter XX, Goods Eligible for Special Tariff Benefits Under the United States-Caribbean Basin Trade Partnership Act.

Alternate IV. As prescribed in 225.1101(6) and (6)(iv), use the following clause, which (i) includes, in the definition of “qualifying country end product” at paragraph (2)(i), the domestic content threshold that will apply to the entire contract period of performance; (ii) adds “South Caucasus/Central and South Asian (SC/CASA) state” and “South Caucasus/Central and South Asian (SC/CASA) state end product” to paragraph (a); (iii) uses a different paragraph (c) than the basic clause; (iv) adds a new paragraph (d); and (v) includes paragraphs (e) and (f) which are the same paragraphs (d) and (e) of the basic clause:

(a) Definitions. As used in this clause—

Caribbean Basin country end product—

(1) Means an article that—

(i) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself; and

(2) Excludes products, other than petroleum and any product derived from petroleum, that are not granted duty-free treatment under the Caribbean Basin Economic Recovery Act (19 U.S.C. 2703(b)). These exclusions presently consist of—

(i) Textiles, apparel articles, footwear, handbags, luggage, flat goods, work gloves, leather wearing apparel, and handloomed, handmade, or folklore articles that are not granted duty-free status in the Harmonized Tariff Schedule of the United States (HTSUS);

(ii) Tuna, prepared or preserved in any manner in airtight containers; and

(iii) Watches and watch parts (including cases, bracelets, and straps) of whatever type, including, but not limited to, mechanical, quartz digital, or quartz analog, if such watches or watch parts contain any material that is the product of any country to which the HTSUS column 2 rates of duty (HTSUS General Note 3(b)) apply.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of commercial product in section 2.101 of the Federal Acquisition Regulation);

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Designated country means—

(1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, North Macedonia, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);

(2) A Free Trade Agreement country (Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, East Timor, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Maldives, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, Tanzania, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).

Designated country end product means a WTO GPA country end product, a Free Trade Agreement country end product, a least developed country end product, or a Caribbean Basin country end product.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Free Trade Agreement country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Least developed country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a least developed country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Nondesignated country end product means any end product that is not a U.S.-made end product or a designated country end product.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(ii) The end product is a COTS item.

South Caucasus/Central and South Asian (SC/CASA) state means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

South Caucasus/Central and South Asian (SC/CASA) state end product means an article that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

United States means the 50 States, the District of Columbia, and outlying areas.

U.S.-made end product means an article that—

(1) Is mined, produced, or manufactured in the United States; or

(2) Is substantially transformed in the United States into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed.

WTO GPA country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a WTO GPA country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only U.S.-made, qualifying country, SC/CASA state, or designated country end products unless—

(1) In its offer, the Contractor specified delivery of other nondesignated country end products in the Trade Agreements Certificate provision of the solicitation; and

(2)(i) Offers of U.S.-made, qualifying country, SC/CASA state, or designated country end products from responsive, responsible offerors are either not received or are insufficient to fill the Government's requirements; or

(ii) A national interest waiver has been granted.

(d) If the Contractor is from an SC/CASA state, the Contractor shall inform its government of its participation in this acquisition and that it generally will not have such opportunity in the future unless its government provides reciprocal procurement opportunities to U.S. products and services and suppliers of such products and services.

(e) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(f) The HTSUS is available at http://www.usitc.gov/tata/hts/bychapter/index.htm. The following sections of the HTSUS provide information regarding duty-free status of articles specified in the definition of “Caribbean Basin country end product” within paragraph (a) of this clause:

(1) General Note 3(c), Products Eligible for Special Tariff Treatment.

(2) General Note 17, Products of Countries Designated as Beneficiary Countries Under the United States—Caribbean Basin Trade Partnership Act of 2000.

(3) Section XXII, Chapter 98, Subchapter II, Articles Exported and Returned, Advanced or Improved Abroad, U.S. Note 7(b).

(4) Section XXII, Chapter 98, Subchapter XX, Goods Eligible for Special Tariff Benefits Under the United States—Caribbean Basin Trade Partnership Act.

(a) Definitions. “Product from Afghanistan” and “service from Afghanistan,” as used in this provision, are defined in the clause of this solicitation entitled “Requirement for Products or Services from Afghanistan” (DFARS 252.225-7024).

(b) Representation. The offeror represents that all products or services to be delivered under a contract resulting from this solicitation are products from Afghanistan or services from Afghanistan, except those listed in—

(1) Paragraph (c) of this provision; or

(2) Paragraph (c)(2) of the provision entitled “Trade Agreements Certificate,” if included in this solicitation.

(c) Other products or services. The following offered products or services are not products from Afghanistan or services from Afghanistan:

(d) Evaluation. For the purpose of evaluating competitive offers, the Contracting Officer will increase by 50 percent the prices of offers of products or services that are not products or services from Afghanistan.

Substitute the following paragraphs (b), (d), and (e) for paragraphs (b) and (d) of the provision at FAR 52.204-8:

(b)(1) If the provision at FAR 52.204-7, System for Award Management, is included in this solicitation, paragraph (e) of this provision applies.

(2) If the provision at FAR 52.204-7, System for Award Management, is not included in this solicitation, and the Offeror has an active registration in the System for Award Management (SAM), the Offeror may choose to use paragraph (e) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The Offeror shall indicate which option applies by checking one of the following boxes:

____ (i) Paragraph (e) applies.

____ (ii) Paragraph (e) does not apply and the Offeror has completed the individual representations and certifications in the solicitation.

(d)(1) The following representations or certifications in the SAM database are applicable to this solicitation as indicated:

(i) 252.204-7016, Covered Defense Telecommunications Equipment or Services—Representation. Applies to all solicitations.

(ii) 252.216-7008, Economic Price Adjustment—Wage Rates or Material Prices Controlled by a Foreign Government. Applies to solicitations for fixed-price supply and service contracts when the contract is to be performed wholly or in part in a foreign country, and a foreign government controls wage rates or material prices and may during contract performance impose a mandatory change in wages or prices of materials.

(iii) 252.225-7042, Authorization to Perform. Applies to all solicitations when performance will be wholly or in part in a foreign country.

(iv) 252.225-7049, Prohibition on Acquisition of Certain Foreign Commercial Satellite Services—Representations. Applies to solicitations for the acquisition of commercial satellite services.

(v) 252.225-7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism. Applies to all solicitations expected to result in contracts of $150,000 or more.

(vi) 252.229-7012, Tax Exemptions (Italy)—Representation. Applies to solicitations when contract performance will be in Italy.

(vii) 252.229-7013, Tax Exemptions (Spain)—Representation. Applies to solicitations when contract performance will be in Spain.

(2) The following representations or certifications in SAM are applicable to this solicitation as indicated by the Contracting Officer: [Contracting Officer check as appropriate.]

(e) The Offeror has completed the annual representations and certifications electronically via the SAM website at https://www.sam.gov After reviewing the SAM database information, the Offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in FAR 52.204-8(c) and paragraph (d) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer, and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [Offeror to insert changes, identifying change by provision number, title, date]. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the Offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications located in the SAM database.

(a) Definitions. As used in this clause—

(1) “Product from Afghanistan” means a product that is mined, produced, or manufactured in Afghanistan.

(2) “Service from Afghanistan” means a service including construction that is performed in Afghanistan predominantly by citizens or permanent resident aliens of Afghanistan.

(b) The Contractor shall provide only products from Afghanistan or services from Afghanistan under this contract, unless, in its offer, it specified that it would provide products or services other than products from Afghanistan or services from Afghanistan.

(a) Definitions. As used in this clause—

(1) Component means any item supplied to the Government as part of an end product or of another component.

(2) Domestic manufacture means manufactured in the United States, its outlying areas, or Canada.

(3) Forging items means—

(b) End products and their components delivered under this contract shall contain forging items that are of domestic manufacture only.

(c) The restriction in paragraph (b) of this clause may be waived upon request from the Contractor in accordance with subsection 225.7102-3 of the Defense Federal Acquisition Regulation Supplement.

(d) The Contractor shall retain records showing compliance with the restriction in paragraph (b) of this clause until 3 years after final payment and shall make the records available upon request of the Contracting Officer.

(e) The Contractor shall insert the substance of this clause, including this paragraph (e), in subcontracts for forging items or for other items that contain forging items.

(a) Definitions. As used in this clause—

(1) “Product from Afghanistan” means a product that is mined, produced, or manufactured in Afghanistan.

(2) “Service from Afghanistan” means a service including construction that is performed in Afghanistan predominantly by citizens or permanent resident aliens of Afghanistan.

(b) The Contractor shall provide only products from Afghanistan or services from Afghanistan under this contract.

(a) Except as provided in paragraph (b) of this clause, contingent fees, as defined in the Covenant Against Contingent Fees clause of this contract, are generally an allowable cost, provided the fees are paid to—

(1) A bona fide employee of the Contractor; or

(2) A bona fide established commercial or selling agency maintained by the Contractor for the purpose of securing business.

(b) For foreign military sales, unless the contingent fees have been identified and payment approved in writing by the foreign customer before contract award, the following contingent fees are unallowable under this contract:

(1) For sales to the Government(s) of ____________________________, contingent fees in any amount.

(2) For sales to Governments not listed in paragraph (b)(1) of this clause, contingent fees exceeding $50,000 per foreign military sale case.

The Contractor and its subcontractors shall not take into account the exclusionary policies or practices of any foreign government in employing or assigning personnel, if—

(a) The personnel will perform functions required by this contract, either in the United States or abroad; and

(b) The exclusionary policies or practices of the foreign government are based on race, religion, national origin, or sex.

(a) Definitions. As used in this clause—

“Textile component” means any item consisting of fibers, yarns, or fabric, supplied for incorporation into a uniform or a component of a uniform. It does not include items that do not contain fibers, yarns, or fabric, such as the metallic or plastic elements of buttons, zippers, or other clothing fasteners.

“United States” means the 50 States, the District of Columbia, and outlying areas.

(b) As required by section 826 of the National Defense Authorization Act for Fiscal Year 2013 (Pub. L. 112-239), the Contractor shall deliver under this contract only textile components that have been produced in the United States.

(c) There are no exceptions or waivers to this requirement.

(a) Carbon, alloy, and armor steel plate shall be melted and rolled in the United States or Canada if the carbon, alloy, or armor steel plate—

(1) Is in Federal Supply Class 9515 or is described by specifications of the American Society for Testing Materials or the American Iron and Steel Institute; and

(2)(i) Will be delivered to the Government for use in a Government-owned facility or a facility under the control of the Department of Defense; or

(ii) Will be purchased by the Contractor for use in a Government-owned facility or a facility under the control of the Department of Defense.

(b) This restriction—

(1) Applies to the acquisition of carbon, alloy, or armor steel plate as a finished steel mill product that may be used “as is” or may be used as an intermediate material for the fabrication of an end product; and

(2) Does not apply to the acquisition of an end product (e.g., a machine tool), to be used in the facility, that contains carbon, alloy, or armor steel plate as a component.

(a) Definitions. As used in this provision—

(1) Foreign person means any person (including any individual, partnership, corporation, or other form of association) other than a United States person.

(2) United States means the 50 States, the District of Columbia, outlying areas, and the outer Continental Shelf as defined in 43 U.S.C. 1331.

(3) United States person is defined in 50 U.S.C. App. 2415(2) and means—

(i) Any United States resident or national (other than an individual resident outside the United States who is employed by other than a United States person);

(ii) Any domestic concern (including any permanent domestic establishment of any foreign concern); and

(iii) Any foreign subsidiary or affiliate (including any permanent foreign establishment) of any domestic concern that is controlled in fact by such domestic concern.

(b) Certification. If the offeror is a foreign person, the offeror certifies, by submission of an offer, that it—

(1) Does not comply with the Secondary Arab Boycott of Israel; and

(2) Is not taking or knowingly agreeing to take any action, with respect to the Secondary Boycott of Israel by Arab countries, which 50 U.S.C. App. 2407(a) prohibits a United States person from taking.

(a) Offered prices for contracts or subcontracts with United Kingdom (U.K.) firms may contain commercial exploitation levies assessed by the Government of the U.K. The offeror shall identify to the Contracting Officer all levies included in the offered price by describing—

(1) The name of the U.K. firm;

(2) The item to which the levy applies and the item quantity; and

(3) The amount of levy plus any associated indirect costs and profit or fee.

(b) In the event of difficulty in identifying levies included in a price from a prospective subcontractor, the offeror may seek advice through the Director of Procurement, United Kingdom Defence Procurement Office, British Embassy, 3100 Massachusetts Avenue NW., Washington, DC 20006.

(c) The U.S. Government may attempt to obtain a waiver of levies pursuant to the U.S./U.K. reciprocal waiver agreement of July 1987.

(1) If the U.K. waives levies before award of a contract, the Contracting Officer will evaluate the offer without the levy.

(2) If levies are identified but not waived before award of a contract, the Contracting Officer will evaluate the offer inclusive of the levies.

(3) If the U.K. grants a waiver of levies after award of a contract, the U.S. Government reserves the right to reduce the contract price by the amount of the levy waived plus associated indirect costs and profit or fee.

(a) Definitions. As used in this provision—

Controlled technical information, covered contractor information system, covered defense information, cyber incident, information system, and technical information are defined in clause 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting.

(b) The security requirements required by contract clause 252.204-7012, shall be implemented for all covered defense information on all covered contractor information systems that support the performance of this contract.

(c) For covered contractor information systems that are not part of an information technology service or system operated on behalf of the Government (see 252.204-7012(b)(2))—

(1) By submission of this offer, the Offeror represents that it will implement the security requirements specified by National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171, “Protecting Controlled Unclassified Information in Nonfederal Information Systems and Organizations” (see http://dx.doi.org/10.6028/NIST.SP.800-171)that are in effect at the time the solicitation is issued or as authorized by the contracting officer, not later than December 31, 2017.

(2)(i) If the Offeror proposes to vary from any of the security requirements specified by NIST SP 800-171 that are in effect at the time the solicitation is issued or as authorized by the Contracting Officer, the Offeror shall submit to the Contracting Officer, for consideration by the DoD Chief Information Officer (CIO), a written explanation of—

(A) Why a particular security requirement is not applicable; or

(B) How an alternative but equally effective, security measure is used to compensate for the inability to satisfy a particular requirement and achieve equivalent protection.

(ii) An authorized representative of the DoD CIO will adjudicate offeror requests to vary from NIST SP 800-171 requirements in writing prior to contract award. Any accepted variance from NIST SP 800-171 shall be incorporated into the resulting contract.

(a) The U.S. Government may attempt to obtain a waiver of any commercial exploitation levies included in the price of this contract, pursuant to the U.S./United Kingdom (U.K.) reciprocal waiver agreement of July 1987. If the U.K. grants a waiver of levies included in the price of this contract, the U.S. Government reserves the right to reduce the contract price by the amount of the levy waived plus associated indirect costs and profit or fee.

(b) If the Contractor contemplates award of a subcontract exceeding $1 million to a U.K. firm, the Contractor shall provide the following information to the Contracting Officer before award of the subcontract:

(1) Name of the U.K. firm.

(2) Prime contract number.

(3) Description of item to which the levy applies.

(4) Quantity being acquired.

(5) Amount of levy plus any associated indirect costs and profit or fee.

(c) In the event of difficulty in identifying levies included in a price from a prospective subcontractor, the Contractor may seek advice through the Director of Procurement, United Kingdom Defence Procurement Office, British Embassy, 3100 Massachusetts Avenue NW., Washington, DC 20006.

(d) The Contractor shall insert the substance of this clause, including this paragraph (d), in any subcontract for supplies where a lower-tier subcontract exceeding $1 million with a U.K. firm is anticipated.

(a) Definitions. “Bahraini end product,” “commercially available off-the-shelf (COTS) item,” “component,” “critical component,” “critical item,” “domestic end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “foreign end product,” “Moroccan end product,” “Panamanian end product,” “Peruvian end product,” “qualifying country end product,” and “United States,” as used in this provision, have the meanings given in the “252.225-7036, Buy American”—Free Trade Agreements—Balance of Payments Program—Basic clause of this solicitation.

(b) Evaluation. The Government—

(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) For line items subject to Buy American—Free Trade Agreements—Balance of Payments Program—Basic clause of this solicitation, will evaluate offers of qualifying country end products or Free Trade Agreement country end products other than Bahraini end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American or the Balance of Payments Program.

(c) Certifications and identification of country of origin.

(1) For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Basic clause of this solicitation, the Offeror certifies that—

(i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product;

(ii) Each domestic end product listed in paragraph (c)(3) of this provision contains a critical component or a critical item; and

(iii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

(2) The Offeror shall identify all end products that are not domestic end products.

(i) The Offeror certifies that the following supplies are qualifying country (except Australian) end products:

(ii) The Offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahraini end products, Moroccan end products, Panamanian end products or Peruvian end products:

(iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

(3) The Offeror shall list the line item numbers of domestic end products that contain a critical component or a critical item (see section 25.105 of the Federal Acquisition Regulation).

(a) Definitions. Commercially available off-the-shelf (COTS) item, component, critical component, critical item, domestic end product, foreign end product, qualifying country end product, and United States, as used in this provision, have the meanings given in the 252.225-7036, Buy American—Free Trade Agreements—Balance of Payments Program—Alternate I clause of this solicitation.

(b) Evaluation. The Government—

(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate I clause of this solicitation, will evaluate offers of qualifying country end products without regard to the restrictions of the Buy American or the Balance of Payments Program.

(c) Certifications and identification of country of origin.

(1) For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate I clause of this solicitation, the Offeror certifies that—

(i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product;

(ii) Each domestic end product listed in paragraph (c)(3) of this provision contains a critical component or a critical item; and

(iii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

(2) The Offeror shall identify all end products that are not domestic end products.

(i) The Offeror certifies that the following supplies are qualifying country end products:

(ii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except those that are COTS items that are mined, produced, or manufactured in the United States. If the percentage of the domestic content is unknown, select “no”.

(3) The Offeror shall list the line item numbers of domestic end products that contain a critical component or a critical item (see section 25.105 of the Federal Acquisition Regulation).

Alternate II. As prescribed in 225.1101(9) and (9)(iii), use the following provision, which adds South Caucasus/Central and South Asian (SC/CASA) state and South Caucasus/Central and South Asian (SC/CASA) state end product to paragraph (a), and uses different paragraphs (b)(2) and (c)(2)(i) than the basic provision:

(a) Definitions. Bahraini end product, commercially available off-the-shelf (COTS) item, component, critical component, critical item, domestic end product, Free Trade Agreement country, Free Trade Agreement country end product, foreign end product, Moroccan end product, Panamanian end product, Peruvian end product, qualifying country end product, South Caucasus/Central and South Asian (SC/CASA) state, South Caucasus/Central and South Asian (SC/CASA) state end product, and United States, as used in this provision, have the meanings given in the 252.225-7036, Buy American—Free Trade Agreements—Balance of Payments Program—Alternate II clause of this solicitation.

(b) Evaluation. The Government—

(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate II clause of this solicitation, will evaluate offers of qualifying country end products, SC/CASA state end products, or Free Trade Agreement country end products other than Bahraini end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American or the Balance of Payments Program.

(c) Certifications and identification of country of origin.

(1) For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate II clause of this solicitation, the Offeror certifies that—

(i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product;

(ii) Each domestic end product listed in paragraph (c)(3) of this provision contains a critical component or a critical item; and

(iii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

(2) The Offeror shall identify all end products that are not domestic end products.

(i) The Offeror certifies that the following supplies are qualifying country (except Australian) or SC/CASA state end products:

(ii) The Offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahraini end products, Moroccan end products, Panamanian end products, or Peruvian end products:

(iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

(3) The Offeror shall list the line item numbers of domestic end products that contain a critical component or a critical item (see section 25.105 of the Federal Acquisition Regulation).

(a) Definitions. Commercially available off-the-shelf (COTS) item, domestic end product, foreign end product, qualifying country end product, South Caucasus/Central and South Asian (SC/CASA) state end product, and United States, as used in this provision have the meanings given in the 252.225-7036, Buy American—Free Trade Agreements—Balance of Payments Program—Alternate III clause of this solicitation.

(b) Evaluation. The Government—

(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate III clause of this solicitation, will evaluate offers of qualifying country end products or SC/CASA state end products without regard to the restrictions of the Buy American or the Balance of Payments Program.

(c) Certifications and identification of country of origin.

(1) For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate III clause of this solicitation, the Offeror certifies that—

(i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product;

(ii) Each domestic end product listed in paragraph (c)(3) of this provision contains a critical component or a critical item; and

(iii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

(2) The Offeror shall identify all end products that are not domestic end products.

(i) The Offeror certifies that the following supplies are qualifying country or SC/CASA state end products:

(ii) The Offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahraini end products, Moroccan end products, Panamanian end products, or Peruvian end products:

(iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

(3) The Offeror shall list the line item numbers of domestic end products that contain a critical component or a critical item (see section 25.105 of the Federal Acquisition Regulation).

Alternate IV. As prescribed in 225.1101(9) and (9)(v), use the following provision, which adds Korean end product to paragraph (a); and uses “Free Trade Agreement country end products other than Bahraini end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products” in paragraphs (b)(2) and (c)(2)(ii), rather than “Free Trade Agreement country end products other than Bahraini end products, Moroccan end products, Panamanian end products, or Peruvian end products” in paragraphs (b)(2) and (c)(2)(ii) of the basic provision:

(a) Definitions. Bahraini end product, commercially available off-the-shelf (COTS) item, component, domestic end product, Free Trade Agreement country, Free Trade Agreement country end product, foreign end product, Korean end product, Moroccan end product, Panamanian end product, Peruvian end product, qualifying country end product, and United States, as used in this provision, have the meanings given in the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate IV clause of this solicitation.

(b) Evaluation. The Government—

(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate IV clause of this solicitation, will evaluate offers of qualifying country end products or Free Trade Agreement country end products other than Bahraini end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American or the Balance of Payments Program.

(c) Certifications and identification of country of origin.

(1) For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate IV clause of this solicitation, the Offeror certifies that—

(i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product;

(ii) Each domestic end product listed in paragraph (c)(3) of this provision contains a critical component or a critical item; and

(iii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

(2) The Offeror shall identify all end products that are not domestic end products.

(i) The Offeror certifies that the following supplies are qualifying country (except Australian) end products:

(ii) The Offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahraini end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products:

(iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

(3) The Offeror shall list the line item numbers of domestic end products that contain a critical component or a critical item (see section 25.105 of the Federal Acquisition Regulation).

Alternate V. As prescribed in 225.1101(9) and (9)(vi), use the following provision, which uses different paragraphs (a), (b)(2), (c)(2)(i), and (c)(2)(ii) than the basic provision:

(a) Definitions. Bahraini end product, commercially available off-the-shelf (COTS) item, component, critical component, critical item, domestic end product, “Free Trade Agreement country, Free Trade Agreement country end product, foreign end product, Korean end product, Moroccan end product, Panamanian end product, Peruvian end product, qualifying country end product, South Caucasus/Central and South Asian (SC/CASA) state end product, and United States, as used in this provision, have the meanings given in the 252.225-7036, Buy American—Free Trade Agreements—Balance of Payments Program—Alternate V clause of this solicitation.

(b) Evaluation. The Government—

(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate V clause of this solicitation, will evaluate offers of qualifying country end products, SC/CASA state end products, or Free Trade Agreement end products other than Bahraini end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American statute or the Balance of Payments Program.

(c) Certifications and identification of country of origin.

(1) For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate V clause of this solicitation, the Offeror certifies that—

(i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product;

(ii) Each domestic end product listed in paragraph (c)(3) of this provision contains a critical component or a critical item; and

(iii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

(2) The Offeror shall identify all end products that are not domestic end products.

(i) The Offeror certifies that the following supplies are qualifying country (except Australian) or SC/CASA state end products:

(ii) The Offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahraini end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products:

(iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

(3) The Offeror shall list the line item numbers of domestic end products that contain a critical component or a critical item (see section 25.105 of the Federal Acquisition Regulation).

(a) Definitions. As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 225.101(d); or award is made before January 1, 2030, for a foreign end product that exceeds 55 percent domestic content (see DFARS 225.103(b)(ii)). The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Free Trade Agreement country means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

Free Trade Agreement country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Moroccan end product means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Panamanian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Peruvian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, Free Trade Agreement country end products other than Bahraini end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Basic provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or a Free Trade Agreement country end product other than a Bahraini end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, a Free Trade Agreement country end product other than a Bahraini end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(a) Definitions. As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of commercial product in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 225.101(d); or award is made before January 1, 2030, for a foreign end product that exceeds 55 percent domestic content (see DFARS 225.103(b)(ii)). The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Free Trade Agreement country means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

Free Trade Agreement country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Moroccan end product means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Panamanian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Peruvian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate I provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, the Contractor shall deliver a qualifying country end product or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(a) Definitions. As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of commercial product in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 225.101(d); or award is made before January 1, 2030, for a foreign end product that exceeds 55 percent domestic content (see DFARS 225.103(b)(ii)). The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Free Trade Agreement country means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

Free Trade Agreement country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Moroccan end product means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Panamanian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Peruvian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

South Caucasus/Central and South Asian (SC/CASA) state means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

South Caucasus/Central and South Asian (SC/CASA) state end product means an article that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, SC/CASA state end products, Free Trade Agreement country end products other than Bahraini end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate II provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, SC/CASA state end products, or a Free Trade Agreement country end product other than a Bahraini end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, a Free Trade Agreement country end product other than a Bahraini end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(a) Definitions. As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of commercial product in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 225.101(d); or award is made before January 1, 2030, for a foreign end product that exceeds 55 percent domestic content (see DFARS 225.103(b)(ii)). The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron and steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Free Trade Agreement country means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

Free Trade Agreement country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Moroccan end product means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Panamanian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Peruvian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

South Caucasus/Central and South Asian (SC/CASA) state means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

South Caucasus/Central and South Asian (SC/CASA) state end product means an article that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, SC/CASA state end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate III provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or SC/CASA state end products, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(a) Definitions. As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of commercial product in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 225.101(d); or award is made before January 1, 2030, for a foreign end product that exceeds 55 percent domestic content (see DFARS 225.103(b)(ii)). The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Free Trade Agreement country means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

Free Trade Agreement country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Korean end product means an article that—

(1) Is wholly the growth, product, or manufacture of Korea; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Korea (Republic of) into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Moroccan end product means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Panamanian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Peruvian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, Free Trade Agreement country end products other than Bahraini end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate IV provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or a Free Trade Agreement country end product other than a Bahraini end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, a Free Trade Agreement country end product other than a Bahraini end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(a) Definitions. As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of commercial product in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 225.101(d); or award is made before January 1, 2030, for a foreign end product that exceeds 55 percent domestic content (see DFARS 225.103(b)(ii)). The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Free Trade Agreement country means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

Free Trade Agreement country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Korean end product means an article that—

(1) Is wholly the growth, product, or manufacture of Korea; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Korea (Republic of) into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Moroccan end product means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Panamanian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Peruvian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

South Caucasus/Central and South Asian (SC/CASA) state means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

South Caucasus/Central and South Asian (SC/CASA) state end product means an article that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, SC/CASA state end products, Free Trade Agreement country end products other than Bahraini end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate V provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, SC/CASA state end products, or a Free Trade Agreement country end product other than a Bahraini end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, a Free Trade Agreement country end product other than a Bahraini end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(a) Definitions. As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Free Trade Agreement country means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

Free Trade Agreement country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Moroccan end product means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Panamanian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Peruvian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, Free Trade Agreement country end products other than Bahraini end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Basic provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or a Free Trade Agreement country end product other than a Bahraini end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, a Free Trade Agreement country end product other than a Bahraini end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(a) Definitions. As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Free Trade Agreement country means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

Free Trade Agreement country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Moroccan end product means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Panamanian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Peruvian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate I provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, the Contractor shall deliver a qualifying country end product or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(a) Definitions. As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Free Trade Agreement country means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

Free Trade Agreement country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Moroccan end product means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Panamanian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Peruvian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

South Caucasus/Central and South Asian (SC/CASA) state means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

South Caucasus/Central and South Asian (SC/CASA) state end product means an article that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, SC/CASA state end products, Free Trade Agreement country end products other than Bahraini end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate II provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, SC/CASA state end products, or a Free Trade Agreement country end product other than a Bahraini end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, a Free Trade Agreement country end product other than a Bahraini end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(a) Definitions. As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron and steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Free Trade Agreement country means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

Free Trade Agreement country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Moroccan end product means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Panamanian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Peruvian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

South Caucasus/Central and South Asian (SC/CASA) state means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

South Caucasus/Central and South Asian (SC/CASA) state end product means an article that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, SC/CASA state end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate III provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or SC/CASA state end products, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(a) Definitions. As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Free Trade Agreement country means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

Free Trade Agreement country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Korean end product means an article that—

(1) Is wholly the growth, product, or manufacture of Korea; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Korea (Republic of) into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Moroccan end product means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Panamanian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Peruvian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, Free Trade Agreement country end products other than Bahraini end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate IV provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or a Free Trade Agreement country end product other than a Bahraini end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, a Free Trade Agreement country end product other than a Bahraini end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(a) Definitions. As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means an article, material, or supply incorporated directly into an end product.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic end product means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

End product means those articles, materials, and supplies to be acquired under this contract for public use.

Foreign end product means an end product other than a domestic end product.

Free Trade Agreement country means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

Free Trade Agreement country end product means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Korean end product means an article that—

(1) Is wholly the growth, product, or manufacture of Korea; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Korea (Republic of) into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Moroccan end product means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Panamanian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Peruvian end product means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Qualifying country means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Qualifying country component means a component mined, produced, or manufactured in a qualifying country.

Qualifying country end product means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

South Caucasus/Central and South Asian (SC/CASA) state means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

South Caucasus/Central and South Asian (SC/CASA) state end product means an article that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, SC/CASA state end products, Free Trade Agreement country end products other than Bahraini end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate V provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, SC/CASA state end products, or a Free Trade Agreement country end product other than a Bahraini end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, a Free Trade Agreement country end product other than a Bahraini end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(a) Definitions. As used in this clause—

Full cooperation—(1) Means disclosure to the Government of the information sufficient to identify the nature and extent of the incident and the individuals responsible for the conduct. It includes providing timely and complete response to Government auditors' and investigators' requests for documents and access to employees with information;

(2) Does not foreclose any contractor rights arising in law, the FAR or the terms of the contract. It does not require—

(i) The contractor to waive its attorney-client privilege or the protections afforded by the attorney work product doctrine; or

(ii) Any officer, director, owner, or employee of the contractor, including a sole proprietor, to waive his or her attorney-client privilege or Fifth Amendment rights; and

(3) Does not restrict the contractor from—

(i) Conducting an internal investigation; or

(ii) Defending a proceeding or dispute arising under the contract or related to a potential or disclosed violation.

Private security functions means the following activities engaged in by a contractor:

(1) Guarding of personnel, facilities, designated sites or property of a Federal agency, the contractor or subcontractor, or a third party.

(2) Any other activity for which personnel are required to carry weapons in the performance of their duties in accordance with the terms of this contract.

(b) Applicability. If this contract is performed both in a designated area and in an area that is not designated, the clause only applies to performance in the designated area. Designated areas are areas outside the United States of—

(1) Contingency operations;

(2) Combat operations, as designated by the Secretary of Defense;

(3) Other significant military operations (as defined in 32 CFR part 159), designated by the Secretary of Defense upon agreement of the Secretary of State;

(4) Peace operations, consistent with Joint Publication 3-07.3; or

(5) Other military operations or military exercises, when designated by the Combatant Commander.

(c) Requirements. The Contractor shall—

(1) Ensure that all Contractor personnel who are responsible for performing private security functions under this contract comply with 32 CFR part 159 and any orders, directives, or instructions to contractors performing private security functions that are identified in the contract for—

(i) Registering, processing, accounting for, managing, overseeing and keeping appropriate records of personnel performing private security functions;

(ii) Authorizing, accounting for and registering in Synchronized Predeployment and Operational Tracker (SPOT), weapons to be carried by or available to be used by personnel performing private security functions;

(iii) Identifying and registering in SPOT armored vehicles, helicopters and other military vehicles operated by Contractors performing private security functions; and

(iv) In accordance with orders and instructions established by the applicable Combatant Commander, reporting incidents in which—

(A) A weapon is discharged by personnel performing private security functions;

(B) Personnel performing private security functions are attacked, killed, or injured;

(C) Persons are killed or injured or property is destroyed as a result of conduct by Contractor personnel;

(D) A weapon is discharged against personnel performing private security functions or personnel performing such functions believe a weapon was so discharged; or

(E) Active, non-lethal countermeasures (other than the discharge of a weapon) are employed by personnel performing private security functions in response to a perceived immediate threat;

(2) Ensure that Contractor personnel who are responsible for performing private security functions under this contract are briefed on and understand their obligation to comply with—

(i) Qualification, training, screening (including, if applicable, thorough background checks) and security requirements established by 32 CFR part 159;

(ii) Applicable laws and regulations of the United States and the host country and applicable treaties and international agreements regarding performance of private security functions;

(iii) Orders, directives, and instructions issued by the applicable Combatant Commander or relevant Chief of Mission relating to weapons, equipment, force protection, security, health, safety, or relations and interaction with locals; and

(iv) Rules on the use of force issued by the applicable Combatant Commander or relevant Chief of Mission for personnel performing private security functions;

(3) Provide full cooperation with any Government-authorized investigation of incidents reported pursuant to paragraph (c)(1)(iv) of this clause and incidents of alleged misconduct by personnel performing private security functions under this contract by providing—

(i) Access to employees performing private security functions; and

(ii) Relevant information in the possession of the Contractor regarding the incident concerned; and

(4) Comply with ANSI/ASIS PSC.1-2012, American National Standard, Management System for Quality of Private Security Company Operations—Requirements with Guidance or the International Standard ISO 18788, Management System for Private Security Operations—Requirements with Guidance (located at http://www.acq.osd.mil/log/PS/psc.html).

(d) Remedies. In addition to other remedies available to the Government—

(1) The Contracting Officer may direct the Contractor, at its own expense, to remove and replace any Contractor or subcontractor personnel performing private security functions who fail to comply with or violate applicable requirements of this clause or 32 CFR part 159. Such action may be taken at the Government's discretion without prejudice to its rights under any other provision of this contract;

(2) The Contractor's failure to comply with the requirements of this clause will be included in appropriate databases of past performance and considered in any responsibility determination or evaluation of past performance; and

(3) If this is an award-fee contract, the Contractor's failure to comply with the requirements of this clause shall be considered in the evaluation of the Contractor's performance during the relevant evaluation period, and the Contracting Officer may treat such failure to comply as a basis for reducing or denying award fees for such period or for recovering all or part of award fees previously paid for such period.

(e) Rule of construction. The duty of the Contractor to comply with the requirements of this clause shall not be reduced or diminished by the failure of a higher- or lower-tier Contractor or subcontractor to comply with the clause requirements or by a failure of the contracting activity to provide required oversight.

(f) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (f), in subcontracts, including subcontracts for commercial products or commercial services, when private security functions will be performed outside the United States in areas of—

(1) Contingency operations;

(2) Combat operations, as designated by the Secretary of Defense;

(3) Other significant military operations (as defined in 32 CFR part 159), designated by the Secretary of Defense upon agreement of the Secretary of State;

(4) Peace operations, consistent with Joint Publication 3-07.3; or

(5) Other military operations or military exercises, when designated by the Combatant Commander.

(a) Definitions. As used in this clause—

Combatant Commander means the commander of a unified or specified combatant command established in accordance with 10 U.S.C. 161.

Contractors authorized to accompany the Force, or CAAF, means contractor personnel, including all tiers of subcontractor personnel, who are authorized to accompany U.S. Armed Forces in applicable operations and have been afforded CAAF status through a letter of authorization. CAAF generally include all U.S. citizen and third-country national employees not normally residing within the operational area whose area of performance is in the direct vicinity of U.S. Armed Forces and who routinely are collocated with the U.S. Armed Forces (especially in non-permissive environments). Personnel collocated with U.S. Armed Forces shall be afforded CAAF status through a letter of authorization. In some cases, Combatant Commander subordinate commanders may designate mission-essential host nation or local national contractor employees (e.g., interpreters) as CAAF. CAAF includes contractors previously identified as contractors deploying with the U.S. Armed Forces. CAAF status does not apply to contractor personnel in support of applicable operations within the boundaries and territories of the United States.

Designated operational area means a geographic area designated by the combatant commander or subordinate joint force commander for the conduct or support of specified military operations.

Designated reception site means the designated place for the reception, staging, integration, and onward movement of contractors deploying during a contingency. The designated reception site includes assigned joint reception centers and other Service or private reception sites.

Law of war means that part of international law that regulates the conduct of armed hostilities. The law of war encompasses all international law for the conduct of hostilities binding on the United States or its individual citizens, including treaties and international agreements to which the United States is a party, and applicable customary international law.

Non-CAAF means personnel who are not designated as CAAF, such as local national (LN) employees and non-LN employees who are permanent residents in the operational area or third-country nationals not routinely residing with U.S. Armed Forces (and third-country national expatriates who are permanent residents in the operational area) who perform support functions away from the close proximity of, and do not reside with, U.S. Armed Forces. Government-furnished support to non-CAAF is typically limited to force protection, emergency medical care, and basic human needs (e.g., bottled water, latrine facilities, security, and food when necessary) when performing their jobs in the direct vicinity of U.S. Armed Forces. Non-CAAF status does not apply to contractor personnel in support of applicable operations within the boundaries and territories of the United States.

Subordinate joint force commander means a sub-unified commander or joint task force commander.

(b) General. (1) This clause applies to both CAAF and non-CAAF when performing in a designated operational area outside the United States to support U.S. Armed Forces deployed outside the United States in—

(i) Contingency operations;

(ii) Peace operations, consistent with Joint Publication 3-07.3; or

(iii) Other military operations or military exercises, when designated by the Combatant Commander or as directed by the Secretary of Defense.

(2) Contract performance in support of U.S. Armed Forces deployed outside the United States may require work in dangerous or austere conditions. Except as otherwise provided in the contract, the Contractor accepts the risks associated with required contract performance in such operations.

(3) When authorized in accordance with paragraph (j) of this clause to carry arms for personal protection, Contractor personnel are only authorized to use force for individual self-defense.

(4) Unless immune from host nation jurisdiction by virtue of an international agreement or international law, inappropriate use of force by contractor personnel supporting the U.S. Armed Forces can subject such personnel to United States or host nation prosecution and civil liability (see paragraphs (d) and (j)(3) of this clause).

(5) Service performed by Contractor personnel subject to this clause is not active duty or service under 38 U.S.C. 106 note.

(c) Support. (1)(i) The Combatant Commander will develop a security plan for protection of Contractor personnel in locations where there is not sufficient or legitimate civil authority, when the Combatant Commander decides it is in the interests of the Government to provide security because—

(A) The Contractor cannot obtain effective security services;

(B) Effective security services are unavailable at a reasonable cost; or

(C) Threat conditions necessitate security through military means.

(ii) In appropriate cases, the Combatant Commander may provide security through military means, commensurate with the level of security provided DoD civilians.

(2)(i) Generally, CAAF will be afforded emergency medical and dental care if injured while supporting applicable operations. Additionally, non-CAAF employees who are injured while in the vicinity of U.S. Armed Forces will normally receive emergency medical and dental care. Emergency medical and dental care includes medical care situations in which life, limb, or eyesight is jeopardized. Examples of emergency medical and dental care include examination and initial treatment of victims of sexual assault; refills of prescriptions for life-dependent drugs; repair of broken bones, lacerations, infections; and traumatic injuries to the dentition. Hospitalization will be limited to stabilization and short-term medical treatment with an emphasis on return to duty or placement in the patient movement system.

(ii) When the Government provides medical treatment or transportation of Contractor personnel to a selected civilian facility, the Contractor shall ensure that the Government is reimbursed for any costs associated with such treatment or transportation.

(iii) Medical or dental care beyond this standard is not authorized.

(3) Contractor personnel must have a Synchronized Predeployment and Operational Tracker (SPOT)-generated letter of authorization signed by the Contracting Officer in order to process through a deployment center or to travel to, from, or within the designated operational area. The letter of authorization also will identify any additional authorizations, privileges, or Government support that Contractor personnel are entitled to under this contract. Contractor personnel who are issued a letter of authorization shall carry it with them at all times while deployed.

(4) Unless specified elsewhere in this contract, the Contractor is responsible for all other support required for its personnel engaged in the designated operational area under this contract.

(d) Compliance with laws and regulations. (1) The Contractor shall comply with, and shall ensure that its personnel supporting U.S. Armed Forces deployed outside the United States as specified in paragraph (b)(1) of this clause are familiar with and comply with, all applicable—

(i) United States, host country, and third country national laws;

(ii) Provisions of the law of war, as well as any other applicable treaties and international agreements;

(iii) United States regulations, directives, instructions, policies, and procedures; and

(iv) Orders, directives, and instructions issued by the Combatant Commander, including those relating to force protection, security, health, safety, or relations and interaction with local nationals.

(2) The Contractor shall institute and implement an effective program to prevent violations of the law of war by its employees and subcontractors, including law of war training in accordance with paragraph (e)(1)(vii) of this clause.

(3) The Contractor shall ensure that CAAF and non-CAAF are aware—

(i) Of the DoD definition of “sexual assault” in DoDD Directive 6495.01, Sexual Assault Prevention and Response Program;

(ii) That many of the offenses addressed by the definition are covered under the Uniform Code of Military Justice (see paragraph (e)(2)(iv) of this clause). Other sexual misconduct may constitute offenses under the Uniform Code of Military Justice, Federal law, such as the Military Extraterritorial Jurisdiction Act, or host nation laws;

(iii) That the offenses not covered by the Uniform Code of Military Justice may nevertheless have consequences to the contractor employees (see paragraph (h)(1) of this clause).

(4) The Contractor shall report to the appropriate investigative authorities, identified in paragraph (d)(6) of this clause, any alleged offenses under—

(i) The Uniform Code of Military Justice (chapter 47 of title 10, United States Code) (applicable to contractors serving with or accompanying an armed force in the field during a declared war or contingency operations); or

(ii) The Military Extraterritorial Jurisdiction Act (chapter 212 of title 18, United States Code).

(5) The Contractor shall provide to all contractor personnel who will perform work on a contract in the deployed area, before beginning such work, information on the following:

(i) How and where to report an alleged crime described in paragraph (d)(4) of this clause.

(ii) Where to seek victim and witness protection and assistance available to contractor personnel in connection with an alleged offense described in paragraph (d)(4) of this clause.

(iii) That this section does not create any rights or privileges that are not authorized by law or DoD policy.

(6) The appropriate investigative authorities to which suspected crimes shall be reported include the following—

(i) US Army Criminal Investigation Command at http://www.cid.army.mil/reportacrime.html;

(ii) Air Force Office of Special Investigations at http://www.osi.andrews.af.mil/library/factsheets/factsheet.asp?id=14522;

(iii) Navy Criminal Investigative Service at http://www.ncis.navy.mil/Pages/publicdefault.aspx;

(iv) Defense Criminal Investigative Service at http://www.dodig.mil/HOTLINE/index.html;

(v) To any command of any supported military element or the command of any base.

(7) Personnel seeking whistleblower protection from reprisals for reporting criminal acts shall seek guidance through the DoD Inspector General hotline at 800-424-9098 or www.dodig.mil/HOTLINE/index.html. Personnel seeking other forms of victim or witness protections should contact the nearest military law enforcement office.

(8)(i) The Contractor shall ensure that Contractor employees supporting the U.S. Armed Forces are aware of their rights to—

(A) Hold their own identity or immigration documents, such as passport or driver's license, regardless of the documents' issuing authority;

(B) Receive agreed upon wages on time;

(C) Take lunch and work-breaks;

(D) Elect to terminate employment at any time;

(E) Identify grievances without fear of reprisal;

(F) Have a copy of their employment contract in a language they understand;

(G) Receive wages that are not below the legal host-country minimum wage;

(H) Be notified of their rights, wages, and prohibited activities prior to signing their employment contract; and

(I) If housing is provided, live in housing that meets host-country housing and safety standards.

(ii) The Contractor shall post these rights in employee work spaces in English and in any foreign language(s) spoken by a significant portion of the workforce.

(iii) The Contractor shall enforce the rights of Contractor personnel supporting the U.S. Armed Forces.

(e) Preliminary personnel requirements. (1) The Contractor shall ensure that the following requirements are met prior to deploying CAAF (specific requirements for each category will be specified in the statement of work or elsewhere in the contract):

(i) All required security and background checks are complete and acceptable.

(ii) All CAAF deploying in support of an applicable operation—

(A) Are medically, dentally, and psychologically fit for deployment and performance of their contracted duties;

(B) Meet the minimum medical screening requirements, including theater-specific medical qualifications as established by the geographic Combatant Commander (as posted to the Geographic Combatant Commander's Web site or other venue); and

(C) Have received all required immunizations as specified in the contract.

(1) During predeployment processing, the Government will provide, at no cost to the Contractor, any military-specific immunizations and/or medications not available to the general public.

(2) All other immunizations shall be obtained prior to arrival at the deployment center.

(3) All CAAF and selected non-CAAF, as specified in the statement of work, shall bring to the designated operational area a copy of the U.S. Centers for Disease Control and Prevention (CDC) Form 731, International Certificate of Vaccination or Prophylaxis as Approved by the World Health Organization, (also known as “shot record” or “Yellow Card”) that shows vaccinations are current.

(iii) Deploying personnel have all necessary passports, visas, and other documents required to enter and exit a designated operational area and have a Geneva Conventions identification card, or other appropriate DoD identity credential, from the deployment center.

(iv) Special area, country, and theater clearance is obtained for all personnel deploying. Clearance requirements are inDoD Directive 4500.54E, DoD Foreign Clearance Program. For this purpose, CAAF are considered non-DoD contractor personnel traveling under DoD sponsorship.

(v) All deploying personnel have received personal security training. At a minimum, the training shall—

(A) Cover safety and security issues facing employees overseas;

(B) Identify safety and security contingency planning activities; and

(C) Identify ways to utilize safety and security personnel and other resources appropriately.

(vi) All personnel have received isolated personnel training, if specified in the contract, in accordance with DoD Instruction 1300.23, Isolated Personnel Training for DoD Civilian and Contractors.

(vii) Personnel have received law of war training as follows:

(A) Basic training is required for all CAAF deployed outside the United States. The basic training will be provided through—

(1) A military-run training center; or

(2) A web-based source, if specified in the contract or approved by the Contracting Officer.

(B) Advanced training, commensurate with their duties and responsibilities, may be required for some Contractor personnel as specified in the contract.

(2) The Contractor shall notify all personnel who are not a host country national, or who are not ordinarily resident in the host country, that—

(i) Such employees, and dependents residing with such employees, who engage in conduct outside the United States that would constitute an offense punishable by imprisonment for more than one year if the conduct had been engaged in within the special maritime and territorial jurisdiction of the United States, may potentially be subject to the criminal jurisdiction of the United States in accordance with the Military Extraterritorial Jurisdiction Act of 2000 (18 U.S.C. 3621, et seq.);

(ii) Pursuant to the War Crimes Act (18 U.S.C. 2441), Federal criminal jurisdiction also extends to conduct that is determined to constitute a war crime when committed by a civilian national of the United States;

(iii) Other laws may provide for prosecution of U.S. nationals who commit offenses on the premises of U.S. diplomatic, consular, military or other U.S. Government missions outside the United States (18 U.S.C. 7(9)); and

(iv) In time of declared war or a contingency operation, CAAF are subject to the jurisdiction of the Uniform Code of Military Justice under 10 U.S.C. 802(a)(10).

(v) Such employees are required to report offenses alleged to have been committed by or against Contractor personnel to appropriate investigative authorities.

(vi) Such employees will be provided victim and witness protection and assistance.

(f) Processing and departure points. CAAF shall—

(1) Process through the deployment center designated in the contract, or as otherwise directed by the Contracting Officer, prior to deploying. The deployment center will conduct deployment processing to ensure visibility and accountability of Contractor personnel and to ensure that all deployment requirements are met, including the requirements specified in paragraph (e)(1) of this clause;

(2) Use the point of departure and transportation mode directed by the Contracting Officer; and

(3) Process through a designated reception site (DRS) upon arrival at the deployed location. The DRS will validate personnel accountability, ensure that specific designated operational area entrance requirements are met, and brief Contractor personnel on theater-specific policies and procedures.

(g) Personnel data. (1) The Contractor shall use the Synchronized Predeployment and Operational Tracker (SPOT) web-based system, to enter and maintain the data for all CAAF and, as designated by the Under Secretary of Defense (Acquisition and Sustainment) or the Combatant Commander, non-CAAF supporting U.S. Armed Forces deployed outside the United States as specified in paragraph (b)(1) of this clause.

(2) The Contractor shall enter the required information about their contractor personnel prior to deployment and shall continue to use the SPOT web-based system at https://spot.dmdc.mil to maintain accurate, up-to-date information throughout the deployment for all Contractor personnel. Changes to status of individual Contractor personnel relating to their in-theater arrival date and their duty location, to include closing out the deployment with their proper status (e.g., mission complete, killed, wounded) shall be annotated within the SPOT database in accordance with the timelines established in the SPOT Business Rules at http://www.acq.osd.mil/log/PS/ctr_mgt_accountability.html.

(h) Contractor personnel. (1) The Contracting Officer may direct the Contractor, at its own expense, to remove and replace any Contractor personnel who jeopardize or interfere with mission accomplishment or who fail to comply with or violate applicable requirements of this contract. Such action may be taken at the Government's discretion without prejudice to its rights under any other provision of this contract, including the Termination for Default clause.

(2) The Contractor shall identify all personnel who occupy a position designated as mission essential and ensure the continuity of essential Contractor services during designated operations, unless, after consultation with the Contracting Officer, Contracting Officer's representative, or local commander, the Contracting Officer directs withdrawal due to security conditions.

(3) The Contractor shall ensure that Contractor personnel follow the guidance at paragraph (e)(2)(v) of this clause and any specific Combatant Commander guidance on reporting offenses alleged to have been committed by or against Contractor personnel to appropriate investigative authorities.

(4) Contractor personnel shall return all U.S. Government-issued identification, to include the Common Access Card, to appropriate U.S. Government authorities at the end of their deployment (or, for non-CAAF, at the end of their employment under this contract).

(i) Military clothing and protective equipment. (1) Contractor personnel are prohibited from wearing military clothing unless specifically authorized in writing by the Combatant Commander. If authorized to wear military clothing, Contractor personnel must—

(i) Wear distinctive patches, arm bands, nametags, or headgear, in order to be distinguishable from military personnel, consistent with force protection measures; and

(ii) Carry the written authorization with them at all times.

(2) Contractor personnel may wear military-unique organizational clothing and individual equipment (OCIE) required for safety and security, such as ballistic, nuclear, biological, or chemical protective equipment.

(3) The deployment center, or the Combatant Commander, shall issue OCIE and shall provide training, if necessary, to ensure the safety and security of Contractor personnel.

(4) The Contractor shall ensure that all issued OCIE is returned to the point of issue, unless otherwise directed by the Contracting Officer.

(j) Weapons. (1) If the Contractor requests that its personnel performing in the designated operational area be authorized to carry weapons for individual self-defense, the request shall be made through the Contracting Officer to the Combatant Commander, in accordance with DoD Instruction 3020.41, Operational Contractor Support. The Combatant Commander will determine whether to authorize in-theater Contractor personnel to carry weapons and what weapons and ammunition will be allowed.

(2) If Contractor personnel are authorized to carry weapons in accordance with paragraph (j)(1) of this clause, the Contracting Officer will notify the Contractor what weapons and ammunition are authorized.

(3) The Contractor shall ensure that its personnel who are authorized to carry weapons—

(i) Are adequately trained to carry and use them—

(A) Safely;

(B) With full understanding of, and adherence to, the rules of the use of force issued by the Combatant Commander; and

(C) In compliance with applicable agency policies, agreements, rules, regulations, and other applicable law;

(ii) Are not barred from possession of a firearm by 18 U.S.C. 922;

(iii) Adhere to all guidance and orders issued by the Combatant Commander regarding possession, use, safety, and accountability of weapons and ammunition;

(iv) Comply with applicable Combatant Commander and local commander force-protection policies; and

(v) Understand that the inappropriate use of force could subject them to U.S. or host-nation prosecution and civil liability.

(4) Whether or not weapons are Government-furnished, all liability for the use of any weapon by Contractor personnel rests solely with the Contractor and the Contractor employee using such weapon.

(5) Upon redeployment or revocation by the Combatant Commander of the Contractor's authorization to issue firearms, the Contractor shall ensure that all Government-issued weapons and unexpended ammunition are returned as directed by the Contracting Officer.

(k) Vehicle or equipment licenses. Contractor personnel shall possess the required licenses to operate all vehicles or equipment necessary to perform the contract in the designated operational area.

(l) Purchase of scarce goods and services. If the Combatant Commander has established an organization for the designated operational area whose function is to determine that certain items are scarce goods or services, the Contractor shall coordinate with that organization local purchases of goods and services designated as scarce, in accordance with instructions provided by the Contracting Officer.

(m) Evacuation. (1) If the Combatant Commander orders a mandatory evacuation of some or all personnel, the Government will provide assistance, to the extent available, to United States and third country national Contractor personnel.

(2) In the event of a non-mandatory evacuation order, unless authorized in writing by the Contracting Officer, the Contractor shall maintain personnel on location sufficient to meet obligations under this contract.

(n) Next of kin notification and personnel recovery. (1) The Contractor shall be responsible for notification of the employee-designated next of kin in the event an employee dies, requires evacuation due to an injury, or is isolated, missing, detained, captured, or abducted.

(2) In the case of isolated, missing, detained, captured, or abducted Contractor personnel, the Government will assist in personnel recovery actions in accordance with DoD Directive 3002.01E, Personnel Recovery in the Department of Defense.

(o) Mortuary affairs. Contractor personnel who die while in support of the U.S. Armed Forces shall be covered by the DoD mortuary affairs program as described in DoD Directive 1300.22, Mortuary Affairs Policy, and DoD Instruction 3020.41, Operational Contractor Support.

(p) Changes. In addition to the changes otherwise authorized by the Changes clause of this contract, the Contracting Officer may, at any time, by written order identified as a change order, make changes in the place of performance or Government-furnished facilities, equipment, material, services, or site. Any change order issued in accordance with this paragraph (p) shall be subject to the provisions of the Changes clause of this contract.

(q) Subcontracts. The Contractor shall incorporate the substance of this clause, including this paragraph (q), in all subcontracts when subcontractor personnel are supporting U.S. Armed Forces deployed outside the United States in—

(1) Contingency operations;

(2) Peace operations consistent with Joint Publication 3-07.3; or

(3) Other military operations or military exercises, when designated by the Combatant Commander or as directed by the Secretary of Defense.

The Contractor shall ensure that all contract correspondence that is addressed to the United States Government is submitted in English or with an English translation.

The offeror represents that it has been duly authorized to operate and to do business in the country or countries in which the contract is to be performed.

Definition. United States, as used in this clause, means, the 50 States, the District of Columbia, and outlying areas.

(b) Except as provided in paragraph (c) of this clause, the Contractor and its subcontractors, if performing or traveling outside the United States under this contract, shall—

(1) Affiliate with the Overseas Security Advisory Council, if the Contractor or subcontractor is a U.S. entity;

(2) Ensure that Contractor and subcontractor personnel who are U.S. nationals and are in-country on a non-transitory basis, register with the U.S. Embassy, and that Contractor and subcontractor personnel who are third country nationals comply with any security related requirements of the Embassy of their nationality;

(3) Provide, to Contractor and subcontractor personnel, antiterrorism/force protection awareness information commensurate with that which the Department of Defense (DoD) provides to its military and civilian personnel and their families, to the extent such information can be made available prior to travel outside the United States; and

(4) Obtain and comply with the most current antiterrorism/force protection guidance for Contractor and subcontractor personnel.

(c) The requirements of this clause do not apply to any subcontractor that is—

(1) A foreign government;

(2) A representative of a foreign government; or

(3) A foreign corporation wholly owned by a foreign government.

(d) Information and guidance pertaining to DoD antiterrorism/force protection can be obtained from [Contracting Officer to insert applicable information cited in PGI 225.372-1].

(a) Definitions. As used in this clause—

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means any article, material, or supply incorporated directly into construction material.

Construction material means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

Cost of components means—

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic construction material means—

(1) For construction material that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured construction material mined or produced in the United States; or

(ii) A construction material manufactured in the United States, if—

(A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with FAR 25.201(c). Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic. Components of unknown origin are treated as foreign; or

(B) The construction material is a COTS item; or

(2) For construction material that consists wholly or predominantly of iron or steel or a combination of both, a construction material manufactured in the United States if the cost of iron and steel not produced in the United States (excluding fasteners) as estimated in good faith by the contractor, constitutes less than 5 percent of the cost of all the components used in such construction material (produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the construction material contains multiple components, the cost of all the materials used in such construction material is calculated in accordance with the definition of “cost of components” in this clause.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Domestic preference. This clause implements the Balance of Payments Program by providing a preference for domestic construction material. The Contractor shall use only domestic construction material in performing this contract, except for—

(1) Construction material valued at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation;

(2) Information technology that is a commercial product; or

(3) The construction material or components listed by the Government as follows:

(a) Definitions. As used in this clause—

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of commercial product in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means any article, material, or supply incorporated directly into construction material.

Construction material means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

Cost of components means—

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic construction material means—

(1) For construction material that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured construction material mined or produced in the United States; or

(ii) A construction material manufactured in the United States, if—

(A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with FAR 25.201(c). Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic. Components of unknown origin are treated as foreign; or

(B) The construction material is a COTS item; or

(2) For construction material that consists wholly or predominantly of iron or steel or a combination of both, a construction material manufactured in the United States if the cost of iron and steel not produced in the United States (excluding fasteners) as estimated in good faith by the contractor, constitutes less than 5 percent of the cost of all the components used in such construction material (produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States, utilized in the manufacture of the construction material and a good faith estimate of the cost of all iron or steel components not produced in the United States, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the construction material contains multiple components, the cost of all the materials used in such construction material is calculated in accordance with the definition of “cost of components” in this clause.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

South Caucasus/Central and South Asian (SC/CASA) state means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

SC/CASA state construction material means construction material that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different construction material distinct from the material from which it was transformed.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Domestic preference. This clause implements the Balance of Payments Program by providing a preference for domestic construction material. The Contractor shall use only domestic construction material or SC/CASA state construction material in performing this contract, except for—

(1) Construction material valued at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation;

(2) Information technology that is a commercial product; or

(3) The construction material or components listed by the Government as follows:

Alternate II. As prescribed in 225.7503(a) and (a)(3), use the following clause, which includes, in the definition of “domestic construction material” at paragraph (1)(ii)(A), the domestic content threshold that will apply to the entire contract period of performance:

(a) Definitions. As used in this clause—

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means any article, material, or supply incorporated directly into construction material.

Construction material means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

Cost of components means—

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic construction material means—

(1) For construction material that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured construction material mined or produced in the United States; or

(ii) A construction material manufactured in the United States, if—

(A) The cost of its components mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic. Components of unknown origin are treated as foreign; or

(B) The construction material is a COTS item; or

(2) For construction material that consists wholly or predominantly of iron or steel or a combination of both, a construction material manufactured in the United States if the cost of iron and steel not produced in the United States (excluding fasteners) as estimated in good faith by the contractor, constitutes less than 5 percent of the cost of all the components used in such construction material (produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the construction material contains multiple components, the cost of all the materials used in such construction material is calculated in accordance with the definition of “cost of components” in this clause.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Domestic preference. This clause implements the Balance of Payments Program by providing a preference for domestic construction material. The Contractor shall use only domestic construction material in performing this contract, except for—

(1) Construction material valued at or below the simplified acquisition threshold in FAR part 2;

(2) Information technology that is a commercial product; or

(3) The construction material or components listed by the Government as follows:

[Contracting Officer to list applicable excepted materials or indicate “none”].

(a) Definitions. As used in this clause—

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means any article, material, or supply incorporated directly into construction material.

Construction material means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

Cost of components means—

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Domestic construction material means—

(1) For construction material that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured construction material mined or produced in the United States; or

(ii) A construction material manufactured in the United States, if—

(A) The cost of its components mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic. Components of unknown origin are treated as foreign; or

(B) The construction material is a COTS item; or

(2) For construction material that consists wholly or predominantly of iron or steel or a combination of both, a construction material manufactured in the United States if the cost of iron and steel not produced in the United States (excluding fasteners) as estimated in good faith by the contractor, constitutes less than 5 percent of the cost of all the components used in such construction material (produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States, utilized in the manufacture of the construction material and a good faith estimate of the cost of all iron or steel components not produced in the United States, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the construction material contains multiple components, the cost of all the materials used in such construction material is calculated in accordance with the definition of “cost of components” in this clause.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

South Caucasus/Central and South Asian (SC/CASA) state means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

SC/CASA state construction material means construction material that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different construction material distinct from the material from which it was transformed.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

(b) Domestic preference. This clause implements the Balance of Payments Program by providing a preference for domestic construction material. The Contractor shall use only domestic construction material or SC/CASA state construction material in performing this contract, except for—

(1) Construction material valued at or below the simplified acquisition threshold in FAR part 2;

(2) Information technology that is a commercial product; or

(3) The construction material or components listed by the Government as follows:

[Contracting Officer to list applicable excepted materials or indicate “none”].

(a) Definitions. As used in this clause—

Compromise means disclosure of information to unauthorized persons, or a violation of the security policy of a system, in which unauthorized intentional or unintentional disclosure, modification, destruction, or loss of an object, or the copying of information to unauthorized media may have occurred.

Controlled technical information means technical information with military or space application that is subject to controls on the access, use, reproduction, modification, performance, display, release, disclosure, or dissemination. Controlled technical information would meet the criteria, if disseminated, for distribution statements B through F using the criteria set forth in DoD Instruction 5230.24, Distribution Statements on Technical Documents. The term does not include information that is lawfully publicly available without restrictions.

Covered defense information means unclassified controlled technical information or other information (as described in the Controlled Unclassified Information (CUI) Registry at http://www.archives.gov/cui/registry/category-list.html) that requires safeguarding or dissemination controls pursuant to and consistent with law, regulations, and Governmentwide policies, and is—

(1) Marked or otherwise identified in the contract, task order, or delivery order and provided to the contractor by or on behalf of DoD in support of the performance of the contract; or

(2) Collected, developed, received, transmitted, used, or stored by or on behalf of the contractor in support of the performance of the contract.

Cyber incident means actions taken through the use of computer networks that result in a compromise or an actual or potentially adverse effect on an information system and/or the information residing therein.

Information system means a discrete set of information resources organized for the collection, processing, maintenance, use, sharing, dissemination, or disposition of information.

Media means physical devices or writing surfaces including, but is not limited to, magnetic tapes, optical disks, magnetic disks, large-scale integration memory chips, and printouts onto which covered defense information is recorded, stored, or printed within a covered contractor information system.

Technical information means technical data or computer software, as those terms are defined in the clause at DFARS 252.227-7013, Rights in Technical Data—Other Than Commercial Products and Commercial Services, regardless of whether or not the clause is incorporated in this solicitation or contract. Examples of technical information include research and engineering data, engineering drawings, and associated lists, specifications, standards, process sheets, manuals, technical reports, technical orders, catalog-item identifications, data sets, studies and analyses and related information, and computer software executable code and source code.

(b) Restrictions. The Contractor agrees that the following conditions apply to any information it receives or creates in the performance of this contract that is information obtained from a third-party's reporting of a cyber incident pursuant to DFARS clause 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting (or derived from such information obtained under that clause):

(1) The Contractor shall access and use the information only for the purpose of furnishing advice or technical assistance directly to the Government in support of the Government's activities related to clause 252.204-7012, and shall not be used for any other purpose.

(2) The Contractor shall protect the information against unauthorized release or disclosure.

(3) The Contractor shall ensure that its employees are subject to use and non-disclosure obligations consistent with this clause prior to the employees being provided access to or use of the information.

(4) The third-party contractor that reported the cyber incident is a third-party beneficiary of the non-disclosure agreement between the Government and Contractor, as required by paragraph (b)(3) of this clause.

(5) A breach of these obligations or restrictions may subject the Contractor to—

(i) Criminal, civil, administrative, and contractual actions in law and equity for penalties, damages, and other appropriate remedies by the United States; and

(ii) Civil actions for damages and other appropriate remedies by the third party that reported the cyber incident, as a third party beneficiary of this clause.

(c) Subcontracts. The Contractor shall include this clause, including this paragraph (c), in subcontracts, or similar contractual instruments, for services that include support for the Government's activities related to safeguarding covered defense information and cyber incident reporting, including subcontracts for commercial products and commercial services, without alteration, except to identify the parties.

(a) Definitions. As used in this clause—

Caribbean Basin country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different construction material distinct from the materials from which it was transformed.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in section 3 of the Shipping Act of 1984 (46 U.S.C. 40102), such as agricultural products and petroleum products.

Component means any article, material, or supply incorporated directly into construction material.

Construction material means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

Cost of components means—

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Designated country means—

(1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, North Macedonia, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);

(2) A Free Trade Agreement country (Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).

Designated country construction material means a construction material that is a WTO GPA country construction material, a Free Trade Agreement country construction material, a least developed country construction material, or a Caribbean Basin country construction material.

Domestic construction material means—

(1) For construction material that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured construction material mined or produced in the United States; or

(ii) A construction material manufactured in the United States, if—

(A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with FAR 25.201(c). Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic. Components of unknown origin are treated as foreign; or

(B) The construction material is a COTS item; or

(2) For construction material that consists wholly or predominantly of iron or steel or a combination of both, a construction material manufactured in the United States if the cost of iron and steel not produced in the United States (excluding fasteners) as estimated in good faith by the contractor, constitutes less than 5 percent of the cost of all the components used in such construction material (produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States, utilized in the manufacture of the construction material and a good faith estimate of the cost of all iron or steel components not produced in the United States, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the construction material contains multiple components, the cost of all the materials used in such construction material is calculated in accordance with the definition of “cost of components” in this clause.

Free Trade Agreement country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different construction material distinct from the material from which it was transformed.

Least developed country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a least developed country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country has been substantially transformed in a least developed country into a new and different construction material distinct from the materials from which it was transformed.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

WTO GPA country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a WTO GPA country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different construction material distinct from the materials from which it was transformed.

(b) This clause implements the Balance of Payments Program by providing a preference for domestic construction material. In addition, the Contracting Officer has determined that the WTO GPA and Free Trade Agreements apply to this acquisition. Therefore, the Balance of Payments Program restrictions are waived for designated country construction materials.

(c) The Contractor shall use only domestic or designated country construction material in performing this contract, except for—

(1) Construction material valued at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation;

(2) Information technology that is a commercial product; or

(3) The construction material or components listed by the Government as follows:

[Contracting Officer to list applicable excepted materials or indicate “none”]

(a) Definitions. As used in this clause—

Bahraini or Mexican construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of Bahrain or Mexico; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain or Mexico into a new and different construction material distinct from the materials from which it was transformed.

Caribbean Basin country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different construction material distinct from the materials from which it was transformed.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of commercial product in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in section 3 of the Shipping Act of 1984 (46 U.S.C. 40102), such as agricultural products and petroleum products.

Component means any article, material, or supply incorporated directly into construction material.

Construction material means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

Cost of components means—

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Designated country means—

(1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, North Macedonia, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);

(2) A Free Trade Agreement country (Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).

Designated country construction material means a construction material that is a WTO GPA country construction material, a Free Trade Agreement country construction material, a least developed country construction material, or a Caribbean Basin country construction material.

Domestic construction material means—

(1) For construction material that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured construction material mined or produced in the United States; or

(ii) A construction material manufactured in the United States, if—

(A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with FAR 25.201(c). Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic. Components of unknown origin are treated as foreign; or

(B) The construction material is a COTS item; or

(2) For construction material that consists wholly or predominantly of iron or steel or a combination of both, a construction material manufactured in the United States if the cost of iron and steel not produced in the United States (excluding fasteners) as estimated in good faith by the contractor, constitutes less than 5 percent of the cost of all the components used in such construction material (produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States, utilized in the manufacture of the construction material and a good faith estimate of the cost of all iron or steel components not produced in the United States, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the construction material contains multiple components, the cost of all the materials used in such construction material is calculated in accordance with the definition of “cost of components” in this clause.

Free Trade Agreement country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different construction material distinct from the material from which it was transformed.

Least developed country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a least developed country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different construction material distinct from the materials from which it was transformed.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

WTO GPA country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a WTO GPA country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different construction material distinct from the materials from which it was transformed.

(b) This clause implements the Balance of Payments Program by providing a preference for domestic construction material. In addition, the Contracting Officer has determined that the WTO GPA and all Free Trade Agreements except United States-Mexico-Canada Agreement and the Bahrain Free Trade Agreement apply to this acquisition. Therefore, the Balance of Payments Program restrictions are waived for designated country construction material other than Bahraini or Mexican construction material.

(c) The Contractor shall use only domestic or designated country construction material other than Bahraini or Mexican construction material in performing this contract, except for—

(1) Construction material valued at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation; or

(2) Information technology that is a commercial product; or

(3) The construction material or components listed by the Government as follows:

(a) Definitions. As used in this clause—

Caribbean Basin country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different construction material distinct from the materials from which it was transformed.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of commercial product in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in section 3 of the Shipping Act of 1984 (46 U.S.C. 40102), such as agricultural products and petroleum products.

Component means any article, material, or supply incorporated directly into construction material.

Construction material means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

Cost of components means—

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Designated country means—

(1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, North Macedonia, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);

(2) A Free Trade Agreement country (Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).

Designated country construction material means a construction material that is a WTO GPA country construction material, a Free Trade Agreement country construction material, a least developed country construction material, or a Caribbean Basin country construction material.

Domestic construction material means—

(1) For construction material that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured construction material mined or produced in the United States; or

(ii) A construction material manufactured in the United States, if—

(A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with FAR 25.201(c). Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic. Components of unknown origin are treated as foreign; or

(B) The construction material is a COTS item; or

(2) For construction material that consists wholly or predominantly of iron or steel or a combination of both, a construction material manufactured in the United States if the cost of iron and steel not produced in the United States (excluding fasteners) as estimated in good faith by the contractor, constitutes less than 5 percent of the cost of all the components used in such construction material (produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States, utilized in the manufacture of the construction material and a good faith estimate of the cost of all iron or steel components not produced in the United States, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the construction material contains multiple components, the cost of all the materials used in such construction material is calculated in accordance with the definition of “cost of components” in this clause.

Free Trade Agreement country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different construction material distinct from the material from which it was transformed.

Least developed country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a least developed country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different construction material distinct from the materials from which it was transformed.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

South Caucasus/Central and South Asian (SC/CASA) state means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

SC/CASA state construction material means construction material that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different construction material distinct from the material from which it was transformed.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

WTO GPA country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a WTO GPA country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different construction material distinct from the materials from which it was transformed.

(b) This clause implements the Balance of Payments Program by providing a preference for domestic construction material. In addition, the Contracting Officer has determined that the WTO GPA, Free Trade Agreements, and other waivers relating to acquisitions in support of operations in Afghanistan apply to this acquisition. Therefore, the Balance of Payments Program restrictions are waived for SC/CASA state and designated country construction materials.

(c) The Contractor shall use only domestic, SC/CASA state, or designated country construction material in performing this contract, except for—

(1) Construction material valued at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation;

(2) Information technology that is a commercial product; or

(3) The construction material or components listed by the Government as follows:

(d) If the Contractor is from an SC/CASA state, the Contractor shall inform its government of its participation in this acquisition and that it generally will not have such opportunity in the future unless its government provides reciprocal procurement opportunities to U.S. products and services and suppliers of such products and services.

(a) Definitions. As used in this clause—

Caribbean Basin country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different construction material distinct from the materials from which it was transformed.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of commercial product in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in section 3 of the Shipping Act of 1984 (46 U.S.C. 40102), such as agricultural products and petroleum products.

Component means any article, material, or supply incorporated directly into construction material.

Construction material means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

Cost of components means—

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Designated country means—

(1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, North Macedonia, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);

(2) A Free Trade Agreement country (Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).

Designated country construction material means a construction material that is a WTO GPA country construction material, a Free Trade Agreement country construction material, a least developed country construction material, or a Caribbean Basin country construction material.

Domestic construction material means—

(1) For construction material that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured construction material mined or produced in the United States; or

(ii) A construction material manufactured in the United States, if—

(A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with FAR 25.201(c). Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic. Components of unknown origin are treated as foreign; or

(B) The construction material is a COTS item; or

(2) For construction material that consists wholly or predominantly of iron or steel or a combination of both, a construction material manufactured in the United States if the cost of iron and steel not produced in the United States (excluding fasteners) as estimated in good faith by the contractor, constitutes less than 5 percent of the cost of all the components used in such construction material (produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States, utilized in the manufacture of the construction material and a good faith estimate of the cost of iron or steel components not produced in the United States, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the construction material contains multiple components, the cost of all the materials used in such construction material is calculated in accordance with the definition of “cost of components” in this clause.

Free Trade Agreement country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different construction material distinct from the material from which it was transformed.

Least developed country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a least developed country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different construction material distinct from the materials from which it was transformed.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

South Caucasus/Central and South Asian (SC/CASA) state means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

SC/CASA state construction material means construction material that—

(1) Is wholly the growth, product, or manufacture of An SC/CASA state; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different construction material distinct from the material from which it was transformed.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

WTO GPA country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a WTO GPA country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different construction material distinct from the materials from which it was transformed.

(b) This clause implements the Balance of Payments Program by providing a preference for domestic construction material. In addition, the Contracting Officer has determined that the WTO GPA, all Free Trade Agreements except United States-Mexico-Canada Agreement and the Bahrain Free Trade Agreement, and other waivers relating to acquisitions in support of operations in Afghanistan apply to this acquisition. Therefore, the Balance of Payments Program restrictions are waived for SC/CASA state and designated country construction material other than Bahraini or Mexican construction material.

(c) The Contractor shall use only domestic, SC/CASA state, or designated country construction material other than Bahraini or Mexican construction material in performing this contract, except for—

(1) Construction material valued at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation;

(2) Information technology that is a commercial product; or

(3) The construction material or components listed by the Government as follows:

(d) If the Contractor is from an SC/CASA state, the Contractor shall inform its government of its participation in this acquisition and that it generally will not have such opportunity in the future unless its government provides reciprocal procurement opportunities to U.S. products and services and suppliers of such products and services.

Alternate IV. As prescribed in 225.7503(b) and (b)(5), use the following clause, which includes, in the definition of “domestic construction material” at paragraph (1)(ii)(A), the domestic content threshold that will apply to the entire contract period of performance:

(a) Definitions. As used in this clause—

Caribbean Basin country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different construction material distinct from the materials from which it was transformed.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in section 3 of the Shipping Act of 1984 (46 U.S.C. 40102), such as agricultural products and petroleum products.

Component means any article, material, or supply incorporated directly into construction material.

Construction material means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

Cost of components means—

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Designated country means—

(1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, North Macedonia, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);

(2) A Free Trade Agreement country (Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).

Designated country construction material means a construction material that is a WTO GPA country construction material, a Free Trade Agreement country construction material, a least developed country construction material, or a Caribbean Basin country construction material.

Domestic construction material means—

(1) For construction material that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured construction material mined or produced in the United States; or

(ii) A construction material manufactured in the United States, if—

(A) The cost of its components mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic. Components of unknown origin are treated as foreign; or

(B) The construction material is a COTS item; or

(2) For construction material that consists wholly or predominantly of iron or steel or a combination of both, a construction material manufactured in the United States if the cost of iron and steel not produced in the United States (excluding fasteners) as estimated in good faith by the contractor, constitutes less than 5 percent of the cost of all the components used in such construction material (produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States, utilized in the manufacture of the construction material and a good faith estimate of the cost of all iron or steel components not produced in the United States, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the construction material contains multiple components, the cost of all the materials used in such construction material is calculated in accordance with the definition of “cost of components” in this clause.

Free Trade Agreement country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different construction material distinct from the material from which it was transformed.

Least developed country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a least developed country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country has been substantially transformed in a least developed country into a new and different construction material distinct from the materials from which it was transformed.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

WTO GPA country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a WTO GPA country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different construction material distinct from the materials from which it was transformed.

(b) This clause implements the Balance of Payments Program by providing a preference for domestic construction material. In addition, the Contracting Officer has determined that the WTO GPA and Free Trade Agreements apply to this acquisition. Therefore, the Balance of Payments Program restrictions are waived for designated country construction materials.

(c) The Contractor shall use only domestic or designated country construction material in performing this contract, except for—

(1) Construction material valued at or below the simplified acquisition threshold in FAR part 2;

(2) Information technology that is a commercial product; or

(3) The construction material or components listed by the Government as follows:

[Contracting Officer to list applicable excepted materials or indicate “none”].

(a) Definitions. As used in this clause—

Bahraini or Mexican construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of Bahrain or Mexico; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain or Mexico into a new and different construction material distinct from the materials from which it was transformed.

Caribbean Basin country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different construction material distinct from the materials from which it was transformed.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in section 3 of the Shipping Act of 1984 (46 U.S.C. 40102), such as agricultural products and petroleum products.

Component means any article, material, or supply incorporated directly into construction material.

Construction material means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

Cost of components means—

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Designated country means—

(1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, North Macedonia, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);

(2) A Free Trade Agreement country (Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).

Designated country construction material means a construction material that is a WTO GPA country construction material, a Free Trade Agreement country construction material, a least developed country construction material, or a Caribbean Basin country construction material.

Domestic construction material means—

(1) For construction material that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured construction material mined or produced in the United States; or

(ii) A construction material manufactured in the United States, if—

(A) The cost of its components mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic. Components of unknown origin are treated as foreign; or

(B) The construction material is a COTS item; or

(2) For construction material that consists wholly or predominantly of iron or steel or a combination of both, a construction material manufactured in the United States if the cost of iron and steel not produced in the United States (excluding fasteners) as estimated in good faith by the contractor, constitutes less than 5 percent of the cost of all the components used in such construction material (produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States, utilized in the manufacture of the construction material and a good faith estimate of the cost of all iron or steel components not produced in the United States, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the construction material contains multiple components, the cost of all the materials used in such construction material is calculated in accordance with the definition of “cost of components” in this clause.

Free Trade Agreement country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different construction material distinct from the material from which it was transformed.

Least developed country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a least developed country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country has been substantially transformed in a least developed country into a new and different construction material distinct from the materials from which it was transformed.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

WTO GPA country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a WTO GPA country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different construction material distinct from the materials from which it was transformed.

(b) This clause implements the Balance of Payments Program by providing a preference for domestic construction material. In addition, the Contracting Officer has determined that the WTO GPA and all Free Trade Agreements except United States-Mexico-Canada Agreement and the Bahrain Free Trade Agreement apply to this acquisition. Therefore, the Balance of Payments Program restrictions are waived for designated country construction material other than Bahraini or Mexican construction material.

(c) The Contractor shall use only domestic or designated country construction material other than Bahraini or Mexican construction material in performing this contract, except for—

(1) Construction material valued at or below the simplified acquisition threshold in FAR part 2; or

(2) Information technology that is a commercial product; or

(3) The construction material or components listed by the Government as follows:

[Contracting Officer to list applicable excepted materials or indicate “none”].

(a) Definitions. As used in this clause—

Caribbean Basin country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different construction material distinct from the materials from which it was transformed.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in section 3 of the Shipping Act of 1984 (46 U.S.C. 40102), such as agricultural products and petroleum products.

Component means any article, material, or supply incorporated directly into construction material.

Construction material means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

Cost of components means—

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Designated country means—

(1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, North Macedonia, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);

(2) A Free Trade Agreement country (Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).

Designated country construction material means a construction material that is a WTO GPA country construction material, a Free Trade Agreement country construction material, a least developed country construction material, or a Caribbean Basin country construction material.

Domestic construction material means—

(1) For construction material that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured construction material mined or produced in the United States; or

(ii) A construction material manufactured in the United States, if—

(A) The cost of its components mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic. Components of unknown origin are treated as foreign; or

(B) The construction material is a COTS item; or

(2) For construction material that consists wholly or predominantly of iron or steel or a combination of both, a construction material manufactured in the United States if the cost of iron and steel not produced in the United States (excluding fasteners) as estimated in good faith by the contractor, constitutes less than 5 percent of the cost of all the components used in such construction material (produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States, utilized in the manufacture of the construction material and a good faith estimate of the cost of all iron or steel components not produced in the United States, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the construction material contains multiple components, the cost of all the materials used in such construction material is calculated in accordance with the definition of “cost of components” in this clause.

Free Trade Agreement country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different construction material distinct from the material from which it was transformed.

Least developed country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a least developed country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different construction material distinct from the materials from which it was transformed.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

South Caucasus/Central and South Asian (SC/CASA) state means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

SC/CASA state construction material means construction material that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different construction material distinct from the material from which it was transformed.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

WTO GPA country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a WTO GPA country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different construction material distinct from the materials from which it was transformed.

(b) This clause implements the Balance of Payments Program by providing a preference for domestic construction material. In addition, the Contracting Officer has determined that the WTO GPA, Free Trade Agreements, and other waivers relating to acquisitions in support of operations in Afghanistan apply to this acquisition. Therefore, the Balance of Payments Program restrictions are waived for SC/CASA state and designated country construction materials.

(c) The Contractor shall use only domestic, SC/CASA state, or designated country construction material in performing this contract, except for—

(1) Construction material valued at or below the simplified acquisition threshold in FAR part 2;

(2) Information technology that is a commercial product; or

(3) The construction material or components listed by the Government as follows:

[Contracting Officer to list applicable excepted materials or indicate “none”].

(d) If the Contractor is from an SC/CASA state, the Contractor shall inform its government of its participation in this acquisition and that it generally will not have such opportunity in the future unless its government provides reciprocal procurement opportunities to U.S. products and services and suppliers of such products and services.

(a) Definitions. As used in this clause—

Caribbean Basin country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different construction material distinct from the materials from which it was transformed.

Commercially available off-the-shelf (COTS) item—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in section 3 of the Shipping Act of 1984 (46 U.S.C. 40102), such as agricultural products and petroleum products.

Component means any article, material, or supply incorporated directly into construction material.

Construction material means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

Cost of components means—

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

Critical item means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

Designated country means—

(1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, North Macedonia, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);

(2) A Free Trade Agreement country (Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).

Designated country construction material means a construction material that is a WTO GPA country construction material, a Free Trade Agreement country construction material, a least developed country construction material, or a Caribbean Basin country construction material.

Domestic construction material means—

(1) For construction material that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured construction material mined or produced in the United States; or

(ii) A construction material manufactured in the United States, if—

(A) The cost of its components mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic. Components of unknown origin are treated as foreign; or

(B) The construction material is a COTS item; or

(2) For construction material that consists wholly or predominantly of iron or steel or a combination of both, a construction material manufactured in the United States if the cost of iron and steel not produced in the United States (excluding fasteners) as estimated in good faith by the contractor, constitutes less than 5 percent of the cost of all the components used in such construction material (produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States, utilized in the manufacture of the construction material and a good faith estimate of the cost of iron or steel components not produced in the United States, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the construction material contains multiple components, the cost of all the materials used in such construction material is calculated in accordance with the definition of “cost of components” in this clause.

Free Trade Agreement country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different construction material distinct from the material from which it was transformed.

Least developed country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a least developed country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different construction material distinct from the materials from which it was transformed.

Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

South Caucasus/Central and South Asian (SC/CASA) state means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

SC/CASA state construction material means construction material that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different construction material distinct from the material from which it was transformed.

Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

United States means the 50 States, the District of Columbia, and outlying areas.

WTO GPA country construction material means a construction material that—

(1) Is wholly the growth, product, or manufacture of a WTO GPA country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different construction material distinct from the materials from which it was transformed.

(b) This clause implements the Balance of Payments Program by providing a preference for domestic construction material. In addition, the Contracting Officer has determined that the WTO GPA, all Free Trade Agreements except United States-Mexico-Canada Agreement and the Bahrain Free Trade Agreement, and other waivers relating to acquisitions in support of operations in Afghanistan apply to this acquisition. Therefore, the Balance of Payments Program restrictions are waived for SC/CASA state and designated country construction material other than Bahraini or Mexican construction material.

(c) The Contractor shall use only domestic, SC/CASA state, or designated country construction material other than Bahraini or Mexican construction material in performing this contract, except for—

(1) Construction material valued at or below the simplified acquisition threshold in FAR part 2;

(2) Information technology that is a commercial product; or

(3) The construction material or components listed by the Government as follows:

[Contracting Officer to list applicable excepted materials or indicate “none”].

(d) If the Contractor is from an SC/CASA state, the Contractor shall inform its government of its participation in this acquisition and that it generally will not have such opportunity in the future unless its government provides reciprocal procurement opportunities to U.S. products and services and suppliers of such products and services.

(a) Definitions. The definitions of “Approved Community”, “defense articles”, “Defense Trade Cooperation (DTC) Treaty”, “export”, “Implementing Arrangement”, “qualifying defense articles”, “transfer”, and “U.S. DoD Treaty-eligible requirements” in DFARS clause 252.225-7047 apply to this provision.

(b) All contract line items in the contemplated contract, except any identified in this paragraph, are intended to satisfy U.S. DoD Treaty-eligible requirements. Specific defense articles that are not U.S. DoD Treaty-eligible will be identified as such in those contract line items that are otherwise U.S. DoD Treaty-eligible.

(c) Approved Community members responding to the solicitation may only export or transfer defense articles that specifically respond to the stated requirements of the solicitation.

(d) Subject to the other terms and conditions of the solicitation and the contemplated contract that affect the acceptability of foreign sources or foreign end products, components, parts, or materials, Approved Community members are permitted, but not required, to use the DTC Treaties for exports or transfers of qualifying defense articles in preparing a response to this solicitation.

(e) Any conduct by an offeror responding to this solicitation that falls outside the scope of the DTC Treaties, the Implementing Arrangements, and the implementing regulations of the Department of State in 22 CFR 126.16 (Australia), 22 CFR 126.17 (United Kingdom), and 22 CFR 126 Supplement No. 1 (exempted technologies list) is subject to all applicable International Traffic in Arms Regulations (ITAR) requirements, including any criminal, civil, and administrative penalties or sanctions, as well as all other United States statutory and regulatory requirements outside of ITAR.

(f) If the offeror uses the procedures established pursuant to the DTC Treaties, the offeror agrees that, with regard to the export or transfer of a qualifying defense article associated with responding to the solicitation, the offeror shall—

(1) Comply with the requirements and provisions of the applicable DTC Treaties, the Implementing Arrangements, and corresponding regulations (including the ITAR) of the U.S. Government and the government of Australia or of the United Kingdom, as applicable; and

(2) Prior to the export or transfer of a qualifying defense article—

(i) Mark, identify, transmit, store, and handle any defense articles provided for the purpose of responding to such solicitations, as well as any defense articles provided with or developed pursuant to their responses to such solicitations, in accordance with the DTC Treaties, the Implementing Arrangements, and corresponding regulations of the United States Government and the government of Australia or the government of the United Kingdom, as applicable, including, but not limited to, the marking and classification requirements described in the applicable regulations;

(ii) Comply with the re-transfer or re-export provisions of the DTC Treaties, the Implementing Arrangements, and corresponding regulations of the United States Government and the government of Australia or the government of the United Kingdom, as applicable, including, but not limited to, the re-transfer and re-export requirements described in the applicable regulations; and

(iii) Acknowledge that any conduct that falls outside or in violation of the DTC Treaties, Implementing Arrangements, and implementing regulations of the applicable government including, but not limited to, unauthorized re-transfer or re-export in violation of the procedures established in the applicable Implementing Arrangement and implementing regulations, remains subject to applicable licensing requirements of the government of Australia, the government of the United Kingdom, and the United States Government, as applicable, including any criminal, civil, and administrative penalties or sanctions contained therein.

(g) Representation. The offeror shall check one of the following boxes and sign the representation:

□ The offeror represents that export(s) or transfer(s) of qualifying defense articles were made in preparing its response to this solicitation and that such export(s) or transfer(s) complied with the requirements of this provision.

□ The offeror represents that no export(s) or transfer(s) of qualifying defense articles were made in preparing its response to this solicitation.

(h) Subcontracts. The offeror shall flow down the substance of this provision, including this paragraph (h), but excluding the representation at paragraph (g), to any subcontractor at any tier intending to use the DTC Treaties in responding to this solicitation.

(a) Definitions. As used in this clause—

“Approved Community” means the U.S. Government, U.S. entities that are registered and eligible exporters, and certain government and industry facilities in Australia or the United Kingdom that are approved and listed by the U.S. Government.

“Australia Community member” means an Australian government authority or nongovernmental entity or facility on the Australia Community list accessible at http://pmddtc.state.gov/treaties/index.html.

“Defense articles” means articles, services, and related technical data, including software, in tangible or intangible form, listed on the United States Munitions List of the International Traffic in Arms Regulations (ITAR), as modified or amended.

“Defense Trade Cooperation (DTC) Treaty” means—

(1) The Treaty Between the Government of the United States of America and the government of the United Kingdom of Great Britain and Northern Ireland concerning Defense Trade Cooperation, signed at Washington and London on June 21 and 26, 2007; or

(2) The Treaty Between the Government of the United States of America and the Government of Australia Concerning Defense Trade Cooperation, signed at Sydney on September 5, 2007].

“Export” means the initial movement of defense articles from the United States Community to the United Kingdom Community and the Australia Community.

“Implementing Arrangement” means—

(1) The Implementing Arrangement Pursuant to the Treaty between the Government of the United States of America and the Government of the United Kingdom of Great Britain and Northern Ireland Concerning Defense Trade Cooperation, signed on February 14, 2008; or

(2) The Implementing Arrangement Pursuant to the Treaty between the Government of the United States of America and the Government of Australia Concerning Defense Trade Cooperation, signed on March 14, 2008.

“Qualifying defense articles” means defense articles that are not exempt from the scope of the DTC Treaties as defined in 22 CFR 126.16(g) and 22 CFR 126.17(g).

“Transfer” means the movement of previously exported defense articles within the Approved Community.

“United Kingdom Community member” means a United Kingdom government authority or nongovernmental entity or facility on the United Kingdom Community list accessible at http://pmddtc.state.gov.

“United States Community” means—

(1) Departments and agencies of the U.S. Government, including their personnel, with, as appropriate, security accreditation and a need-to-know; and

(2) Nongovernmental U.S. entities registered with the Department of State and eligible to export defense articles under U.S. law and regulation, including their employees, with, as appropriate, security accreditation and a need-to-know.

“U.S. DoD Treaty-eligible requirements” means any defense article acquired by the DoD for use in a combined military or counterterrorism operation, cooperative research, development, production or support program, or DoD end use, as described in Article 3 of the U.S.-U.K. DTC Treaty and sections 2 and 3 of the associated Implementing Arrangement; and Article 3 of the U.S.-Australia DTC Treaty and sections 2 and 3 of the associated Implementing Arrangement.

(b) All contract line items in this contract, except any identified in this paragraph, are intended to satisfy U.S. DoD Treaty-eligible requirements. Specific defense articles that are not U.S. DoD Treaty-eligible will be identified as such in those contract line items that are otherwise U.S. DoD Treaty-eligible.

(c) Subject to the other terms and conditions of this contract that affect the acceptability of foreign sources or foreign end products, components, parts, or materials, Approved Community members are permitted, but not required, to use the DTC Treaties for exports or transfers of qualifying defense articles in performance of the contract.

(d) Any conduct by the Contractor that falls outside the scope of the DTC Treaties, the Implementing Arrangements, and 22 CFR 126.16(g) and 22 CFR 126.17(g) is subject to all applicable ITAR requirements, including any criminal, civil, and administrative penalties or sanctions, as well as all other United States statutory and regulatory requirements outside of ITAR, including, but not limited to, regulations issued by the Bureau of Alcohol, Tobacco, Firearms and Explosives found at 27 CFR parts 447, 478, and 479, which are unaffected by the DTC Treaties.

(e) If the Contractor is an Approved Community member, the Contractor agrees that—

(1) The Contractor shall comply with the requirements of the DTC Treaties, the Implementing Arrangements, the ITAR, and corresponding regulations of the U.S. Government and the government of Australia or the government of the United Kingdom, as applicable; and

(2) Prior to the export or transfer of a qualifying defense article the Contractor—

(i) Shall mark, identify, transmit, store, and handle any defense articles provided for the purpose of responding to such solicitations, as well as any defense articles provided with or developed pursuant to their responses to such solicitations, in accordance with the DTC Treaties, the Implementing Arrangements, and corresponding regulations of the United States Government and the government of Australia or the government of the United Kingdom, as applicable, including, but not limited to, the marking and classification requirements described in the applicable regulations;

(ii) Shall comply with the re-transfer or re-export provisions of the DTC Treaties, the Implementing Arrangements, and corresponding regulations of the United States Government and the government of Australia or the government of the United Kingdom, as applicable, including, but not limited to, the re-transfer and re-export requirements described in the applicable regulations; and

(iii) Shall acknowledge that any conduct that falls outside or in violation of the DTC Treaties, Implementing Arrangements, and implementing regulations of the applicable government including, but not limited to, unauthorized re-transfer or re-export in violation of the procedures established in the applicable Implementing Arrangement and implementing regulations, remains subject to applicable licensing requirements of the government of Australia, the government of the United Kingdom, and the United States Government, including any criminal, civil, and administrative penalties or sanctions contained therein.

(f) The contractor shall include the substance of this clause, including this paragraph (f), in all subcontracts that may require exports or transfers of qualifying defense articles in connection with deliveries under the contract.

(a) Definition. “Export-controlled items,” as used in this clause, means items subject to the Export Administration Regulations (EAR) (15 CFR Parts 730-774) or the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120-130). The term includes—

(1) “Defense items,” defined in the Arms Export Control Act, 22 U.S.C. 2778(j)(4)(A), as defense articles, defense services, and related technical data, and further defined in the ITAR, 22 CFR Part 120; and

(2) “Items,” defined in the EAR as “commodities”, “software”, and “technology,” terms that are also defined in the EAR, 15 CFR 772.1.

(b) The Contractor shall comply with all applicable laws and regulations regarding export-controlled items, including, but not limited to, the requirement for contractors to register with the Department of State in accordance with the ITAR. The Contractor shall consult with the Department of State regarding any questions relating to compliance with the ITAR and shall consult with the Department of Commerce regarding any questions relating to compliance with the EAR.

(c) The Contractor's responsibility to comply with all applicable laws and regulations regarding export-controlled items exists independent of, and is not established or limited by, the information provided by this clause.

(d) Nothing in the terms of this contract adds, changes, supersedes, or waives any of the requirements of applicable Federal laws, Executive orders, and regulations, including but not limited to—

(1) The Export Administration Act of 1979, as amended (50 U.S.C. App. 2401, et seq.);

(2) The Arms Export Control Act (22 U.S.C. 2751, et seq.);

(3) The International Emergency Economic Powers Act (50 U.S.C. 1701, et seq.);

(4) The Export Administration Regulations (15 CFR Parts 730-774);

(5) The International Traffic in Arms Regulations (22 CFR Parts 120-130); and

(6) Executive Order 13222, as extended.

(e) The Contractor shall include the substance of this clause, including this paragraph (e), in all subcontracts.

(a) Definitions. As used in this provision—

Covered foreign country, foreign entity, government of a covered foreign country, launch vehicle, satellite services, and state sponsor of terrorism are defined in the clause at Defense Federal Acquisition Regulation Supplement (DFARS) 252.225-7051, Prohibition on Acquisition of Certain Commercial Satellite Services.

Cybersecurity risk means threats to and vulnerabilities of information or information systems and any related consequences caused by or resulting from unauthorized access, use, disclosure, degradation, disruption, modification, or destruction of such information or information systems, including such related consequences caused by an act of terrorism. (10 U.S.C. 2279)]

(b) Prohibition on award. In accordance with 10 U.S.C. 2279, unless an exception is determined to apply in accordance with DFARS 225.772-4, no contract for commercial satellite services may be awarded to—

(1)(i) A foreign entity if the Under Secretary of Defense for Acquisition and Sustainment or the Under Secretary of Defense for Policy reasonably believes that—

(A) The foreign entity is an entity in which the government of a covered foreign country has an ownership interest that enables the government to affect satellite operations;

(B) The foreign entity plans to, or is expected to, provide satellite services under the contract from a covered foreign country; or

(C) Entering into such contract would create an unacceptable cybersecurity risk for DoD; or

(ii) An offeror that is offering to provide the commercial satellite services of a foreign entity as described in paragraph (b)(1) of this provision; or

(2)(i) Any entity, except as provided in paragraph (b)(2)(ii) of this provision, for a launch that occurs on or after December 31, 2022, if the Under Secretary of Defense for Acquisition and Sustainment or the Under Secretary of Defense for Policy reasonably believes that such satellite service will be provided using satellites that will be—

(A) Designed or manufactured—

(1) In a covered foreign country; or

(2) By an entity controlled in whole or in part by, or acting on behalf of, the government of a covered foreign country; or

(B) Launched outside the United States using a launch vehicle that is—

(1) Designed or manufactured in a covered foreign country; or

(2) Provided by—

(i) The government of a covered foreign country; or

(ii) An entity controlled in whole or in part by, or acting on behalf of, the government of a covered foreign country.

(ii) The prohibition in paragraph (b)(2)(i)(B) of this provision does not apply with respect to launch vehicles for which the satellite service provider has a contract or other agreement relating to launch services that, prior to June 10, 2018, was either fully paid for by the satellite service provider or covered by a legally binding commitment of the satellite service provider to pay for such services.

(c) Representations. The Offeror represents that—

(1) It [ ] is, [ ] is not a foreign entity in which the government of a covered foreign country has an ownership interest that enables the government to affect satellite operations. If affirmative, identify the covered foreign country: ________;

(2) It [ ] is, [ ] is not a foreign entity that plans to provide satellite services under the contract from a covered foreign country. If affirmative, identify the covered foreign country: ________;

(3) It [ ] is, [ ] is not offering commercial satellite services provided by a foreign entity in which the government of a covered foreign country has an ownership interest that enables the government to affect satellite operations. If affirmative, identify the foreign entity and the covered foreign country: ________;

(4) It [ ] is, [ ] is not offering commercial satellite services provided by a foreign entity that plans to or is expected to provide satellite services under the contract from a covered foreign country. If affirmative, identify the foreign entity and the covered foreign country: ________;

(5) It [ ] is, [ ] is not offering commercial satellite services that will use satellites, launched on or after December 31, 2022, that will be designed or manufactured in a covered foreign country. If affirmative, identify the covered foreign country: ________;

(6) It [ ] is, [ ] is not offering commercial satellite services that will use satellites, launched on or after December 31, 2022, that will be designed or manufactured by an entity controlled in whole or in part by, or acting on behalf of, the government of a covered foreign country. If affirmative, identify the entity, the covered foreign country, and the relationship of the entity to the government of the covered foreign country: ________;

(7) It [ ] is, [ ] is not offering commercial satellite services that will use satellites, launched outside the United States on or after December 31, 2022, using a launch vehicle that is designed or manufactured in a covered foreign country. If affirmative, identify the covered foreign country: ________;

(8) It [ ] is, [ ] is not offering commercial satellite services that will use satellites, launched outside the United States on or after December 31, 2022, using a launch vehicle that is provided by the government of a covered foreign country. If affirmative, identify the covered foreign country: ________; and

(9) It [ ] is, [ ] is not offering commercial satellite services that will use satellites, launched outside the United States on or after December 31, 2022, using a launch vehicle that is provided by an entity controlled in whole or in part by, or acting on behalf of, the government of a covered foreign country. If affirmative, identify the entity, the covered foreign country, and the relationship of the entity to the government of the covered foreign country: ________;

(d) If the Offeror has responded affirmatively to any representation in paragraphs (c)(7) through (9) of this provision, and if such launches are covered in whole or in part by a contract or other agreement relating to launch services that, prior to June 10, 2018, was either fully paid for by the satellite service provider or covered by a legally binding commitment of the satellite service provider to pay for such services, provide the following information:

(1) The entity awarded the contract or other agreement: ________.

(2) The date the contract or other agreement was awarded: ________.

(3) The period of performance for the contract or other agreement: ________.

(e) The representations in paragraph (c) of this provision are a material representation of fact upon which reliance will be placed when making award. If it is later determined that the Offeror knowingly rendered an erroneous representation, in addition to other remedies available to the Government, the Contracting Officer may terminate the contract resulting from this solicitation for default.

(a) Definitions. As used in this provision—

Government of a country that is a state sponsor of terrorism includes the state and the government of a country that is a state sponsor of terrorism, as well as any political subdivision, agency, or instrumentality thereof.

Significant interest means—

(1) Ownership of or beneficial interest in 5 percent or more of the firm's or subsidiary's securities. Beneficial interest includes holding 5 percent or more of any class of the firm's securities in “nominee shares,” “street names,” or some other method of holding securities that does not disclose the beneficial owner;

(2) Holding a management position in the firm, such as a director or officer;

(3) Ability to control or influence the election, appointment, or tenure of directors or officers in the firm;

(4) Ownership of 10 percent or more of the assets of a firm such as equipment, buildings, real estate, or other tangible assets of the firm; or

(5) Holding 50 percent or more of the indebtedness of a firm.

State sponsor of terrorism means a country determined by the Secretary of State, under section 1754(c)(1)(A)(i) of the Export Control Reform Act of 2018 (Title XVII, Subtitle B, of the National Defense Authorization Act for Fiscal Year 2019, Pub. L. 115-232), to be a country the government of which has repeatedly provided support for acts of international terrorism. As of the date of this provision, state sponsors of terrorism include Iran, North Korea, and Syria.

(b) Prohibition on award. In accordance with 10 U.S.C. 4871, unless a waiver is granted by the Secretary of Defense, no contract may be awarded to a firm if the government of a country that is a state sponsor of terrorism owns or controls a significant interest in—

(1) The firm;

(2) A subsidiary of the firm; or

(3) Any other firm that owns or controls the firm.

(c) Representation. Unless the Offeror submits with its offer the disclosure required in paragraph (d) of this provision, the Offeror represents, by submission of its offer, that the government of a country that is a state sponsor of terrorism does not own or control a significant interest in—

(1) The Offeror;

(2) A subsidiary of the Offeror; or

(3) Any other firm that owns or controls the Offeror.

(d) Disclosure. (1) The Offeror shall disclose in an attachment to its offer if the government of a country that is a state sponsor of terrorism owns or controls a significant interest in the Offeror; a subsidiary of the Offeror; or any other firm that owns or controls the Offeror.

(2) The disclosure shall include—

(i) Identification of each government holding a significant interest; and

(ii) A description of the significant interest held by each government.

(a) Definitions. As used in this clause—

Covered foreign country means—

(1) The People's Republic of China;

(2) North Korea;

(3) The Russian Federation; or

(4) Any country that is a state sponsor of terrorism. (10 U.S.C. 2279)

Foreign entity means—

(1) Any branch, partnership, group or sub-group, association, estate, trust, corporation or division of a corporation, or organization organized under the laws of a foreign state if either its principal place of business is outside the United States or its equity securities are primarily traded on one or more foreign exchanges.

(2) Notwithstanding paragraph (1) of this definition, any branch, partnership, group or sub-group, association, estate, trust, corporation or division of a corporation, or organization that demonstrates that a majority of the equity interest in such entity is ultimately owned by U.S. nationals is not a foreign entity. (31 CFR 800.212)

Government of a covered foreign country includes the state and the government of a covered foreign country, as well as any political subdivision, agency, or instrumentality thereof.

Launch vehicle means a fully integrated space launch vehicle. (10 U.S.C. 2279)

Satellite services means communications capabilities that utilize an on-orbit satellite for transmitting the signal from one location to another.

State sponsor of terrorism means a country determined by the Secretary of State, under section 1754(c)(1)(A)(i) of the Export Control Reform Act of 2018 (Title XVII, Subtitle B, of the National Defense Authorization Act for Fiscal Year 2019, Pub. L. 115-232), to be a country the government of which has repeatedly provided support for acts of international terrorism. As of the date of this provision, state sponsors of terrorism include Iran, North Korea, and Syria. (10 U.S.C. 4871)

(b) Limitation. Unless specified in its offer, the Contractor shall not provide satellite services under this contract that—

(1) Are from a covered foreign country; or

(2) Except as provided in paragraph (c) of this provision, use satellites that will be—

(i) Designed or manufactured—

(A) In a covered foreign country; or

(B) By an entity controlled in whole or in part by, or acting on behalf of, the government of a covered foreign country; or

(ii) Launched outside the United States using a launch vehicle that is designed or manufactured—

(A) In a covered foreign country; or

(B) Provided by—

(1) The government of a covered foreign country; or

(2) An entity controlled in whole or in part by, or acting on behalf of, the government of a covered foreign country.

(c) Exception. The limitation in paragraph (b)(2) of this provision shall not apply with respect to—

(1) A launch that occurs prior to December 31, 2022; or

(2) A satellite service provider that has a contract or other agreement relating to launch services that, prior to June 10, 2018, was either fully paid for by the satellite service provider or covered by a legally binding commitment of the satellite service provider to pay for such services.

(a) Definitions. As used in this clause—

Assembly means an item forming a portion of a system or subsystem that—

(1) Can be provisioned and replaced as an entity; and

(2) Incorporates multiple, replaceable parts.

Commercially available off-the-shelf item—

(1) Means any item of supply that is—

(i) A commercial products (as defined in paragraph (1) of the definition of “commercial products” in section 2.101 of the Federal Acquisition Regulation);

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under this contract or a subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

Component means any item supplied to the Government as part of an end item or of another component.

Covered country means—

(1) The Democratic People's Republic of North Korea;

(2) The People's Republic of China;

(3) The Russian Federation; and

(4) The Islamic Republic of Iran.

Covered material means—

(1) Samarium-cobalt magnets;

(2) Neodymium-iron-boron magnets;

(3) Tantalum metals and alloys;

(4) Tungsten metal powder; and

(5) Tungsten heavy alloy or any finished or semi-finished component containing tungsten heavy alloy.

Electronic device means an item that operates by controlling the flow of electrons or other electrically charged particles in circuits, using interconnections such as resistors, inductors, capacitors, diodes, switches, transistors, or integrated circuits.

End item means the final production product when assembled or completed and ready for delivery under a line item of this contract.

Subsystem means a functional grouping of items that combine to perform a major function within an end item, such as electrical power, attitude control, and propulsion.

Tungsten heavy alloy means a tungsten base pseudo alloy that—

(1) Meets the specifications of ASTM B777 or SAE-AMS-T-21014 for a particular class of tungsten heavy alloy; or

(2) Contains at least 90 percent tungsten in a matrix of other metals (such as nickel-iron or nickel-copper) and has density of at least 16.5 g/cm3).

(b) Restriction. (1) Except as provided in paragraph (c) of this clause—

(i) Effective through December 31, 2026, the Contractor shall not deliver under this contract any covered material melted or produced in any covered country, or any end item, manufactured in any covered country, that contains a covered material; and

(ii) Effective January 1, 2027, the Contractor shall not deliver under this contract any covered material mined, refined, separated, melted, or produced in any covered country, or any end item, manufactured in any covered country, that contains a covered material (section 854, Pub. L. 118-31; 10 U.S.C. 4872).

(2)(i)(A) Effective through December 31, 2026, for samarium-cobalt magnets and neodymium-iron-boron magnets, this restriction includes—

(1) Melting samarium with cobalt to produce the samarium-cobalt alloy or melting neodymium with iron and boron to produce the neodymium-iron-boron alloy; and

(2) All subsequent phases of production of the magnets, such as powder formation, pressing, sintering or bonding, and magnetization.

(B) Effective January 1, 2027, for samarium-cobalt magnets this restriction includes the entire supply chain from mining or production of a cobalt and samarium ore or feedstock, including recycled material, through production of finished magnets.

(ii) The restriction on melting and producing of samarium-cobalt magnets is in addition to any applicable restrictions on melting of specialty metals if the clause at 252.225-7009, Restriction on Acquisition of Certain Articles Containing Specialty Metals, is included in the contract.

(3) Effective January 1, 2027, for neodymium-iron-boron magnets, this restriction includes entire supply chain from mining of neodymium, iron, and boron through production of finished magnets.

(4)(i) Effective through December 31, 2026, for production of tantalum metals of any kind and alloys, this restriction includes the reduction or melting of any form of tantalum to create tantalum metal including unwrought, powder, mill products, and alloys. The restriction also covers all subsequent phases of production of tantalum metals and alloys.

(ii) Effective January 1, 2027, for production of tantalum metals of any kind and alloys, this restriction includes mining or production of a tantalum ore or feedstock, including recycled material, through production of metals of any kind and alloys.

(5)(i) Effective through December 31, 2026, for production of tungsten metal powder and tungsten heavy alloy, this restriction includes—

(A) Atomization;

(B) Calcination and reduction into powder;

(C) Final consolidation of non-melt derived metal powders; and

(D) All subsequent phases of production of tungsten metal powder, tungsten heavy alloy, or any finished or semi-finished component containing tungsten heavy alloy.

(ii) Effective January 1, 2027, for production of tungsten metal powder, tungsten heavy alloy, or any finished or semi-finished component containing tungsten heavy alloy, this restriction includes mining or production of a tungsten ore or feedstock, including recycled material, through production of tungsten metal powders, tungsten heavy alloy, or any finished or semi-finished component containing tungsten heavy alloy.

(c) Exceptions. This clause does not apply—

(1) To an end item containing a covered material that is—

(i) A commercially available off-the-shelf item, other than—

(A) A commercially available off-the-shelf item that is—

(1) 50 percent or more tungsten by weight effective through December 31, 2026; or

(2) 50 percent or more covered material by weight effective January 1, 2027;

(B) Effective through December 31, 2026, a tantalum metal, tantalum alloy, or tungsten heavy alloy mill product, such as bar, billet, slab, wire, cube, sphere, block, blank, plate, or sheet, that has not been incorporated into an end item, subsystem, assembly, or component;

(ii) Effective January 1, 2027, a covered material that is a mill product such as bar, billet, slab, wire, cube, sphere, block, blank, plate, or sheet, that has not been incorporated into an end item, subsystem, assembly, or component;

(iii) An electronic device, unless otherwise specified in the contract; or

(iv) A neodymium-iron-boron magnet manufactured from recycled material if the milling of the recycled material and sintering of the final magnet takes place in the United States.

(2) If the authorized agency official concerned has made a nonavailability determination, in accordance with section 225.7018-4 of the Defense Federal Acquisition Regulation Supplement, that compliant covered materials of satisfactory quality and quantity, in the required form, cannot be procured as and when needed at a reasonable price.

(i) For tantalum metal, tantalum alloy, or tungsten heavy alloy, the term “required form” refers to the form of the mill product, such as bar, billet, wire, slab, plate, or sheet, in the grade appropriate for the production of a finished end item to be delivered to the Government under this contract; or a finished component assembled into an end item to be delivered to the Government under the contract.

(ii) For samarium-cobalt magnets or neodymium-iron-boron magnets, the term “required form” refers to the form and properties of the magnets.

(d) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (d), in subcontracts and other contractual instruments that are for items containing a covered material, including subcontracts and other contractual instruments for commercial products, unless an exception in paragraph (c) of this clause applies. The Contractor shall not alter this clause other than to identify the appropriate parties.

(a) Definitions. As used in this provision—

Covered military installation means a military installation in Europe identified by DoD as a main operating base.

Furnished energy means energy furnished to a covered military installation in any form and for any purpose, including heating, cooling, and electricity.

Main operating base means a facility outside the United States and its territories with permanently stationed operating forces and robust infrastructure.

(b) Prohibition. In accordance with section 2821 of the National Defense Authorization Act for Fiscal Year 2020 (Pub. L. 116-92), contracts for the acquisition of furnished energy for a covered military installation shall not use any energy sourced from inside the Russian Federation as a means of generating the furnished energy for the covered military installation, unless a waiver is approved. The prohibition—

(1) Applies to all forms of energy that are furnished to a covered military installation; and

(2) Does not apply to energy converted by a third party into another form of energy and not directly delivered to a covered military installation.

(c) Representation. By submission of its offer, the Offeror represents that the Offeror will not use or provide any energy sourced from inside the Russian Federation as a means of generating the furnished energy for the covered military installation in the performance of any contract, subcontract, or other contractual instrument resulting from this solicitation.

(a) Definitions. As used in this clause—

Covered military installation means a military installation in Europe identified by DoD as a main operating base.

Furnished energy means energy furnished to a covered military installation in any form and for any purpose, including heating, cooling, and electricity.

Main operating base means a facility outside the United States and its territories with permanently stationed operating forces and robust infrastructure.

(b) Prohibition. In accordance with section 2821 of the National Defense Authorization Act for Fiscal Year 2020 (Pub. L. 116-92), the Contractor shall not use in the performance of this contract any energy sourced from inside the Russian Federation as a means of generating the furnished energy for the covered military installation unless a waiver is approved. The prohibition—

(1) Applies to all forms of energy that are furnished to a covered military installation; and

(2) Does not apply to energy converted by a third party into another form of energy and not directly delivered to a covered military installation.

(c) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts and other commercial instruments that are for furnished energy at a covered military installation, including subcontracts and commercial instruments for commercial products .

(a) If the Contractor is required to report any of its activities in accordance with Department of Commerce regulations (15 CFR part 781 et seq.) or Nuclear Regulatory Commission regulations (10 CFR part 75) in order to implement the declarations required by the U.S.-International Atomic Energy Agency Additional Protocol (U.S.-IAEA AP), the Contractor shall—

(1) Immediately provide written notification to the following DoD Program Manager:

[Contracting Officer to insert Program Manager's name, mailing address, e-mail address, telephone number, and facsimile number];

(2) Include in the notification—

(i) Where DoD contract activities or information are located relative to the activities or information to be declared to the Department of Commerce or the Nuclear Regulatory Commission; and

(ii) If or when any current or former DoD contract activities and the activities to be declared to the Department of Commerce or the Nuclear Regulatory Commission have been or will be co-located or located near enough to one another to result in disclosure of the DoD activities during an IAEA inspection or visit; and

(3) Provide a copy of the notification to the Contracting Officer.

(b) After receipt of a notification submitted in accordance with paragraph (a) of this clause, the DoD Program Manager will—

(1) Conduct a security assessment to determine if and by what means access may be granted to the IAEA; or

(2) Provide written justification to the component or agency treaty office for a national security exclusion, in accordance with DoD Instruction 2060.03, Application of the National Security Exclusion to the Agreements Between the United States of America and the International Atomic Energy Agency for the Application of Safeguards in the United States of America. DoD will notify the Contractor if a national security exclusion is applied at the Contractor's location to prohibit access by the IAEA.

(c) If the DoD Program Manager determines that a security assessment is required—

(1) DoD will, at a minimum—

(i) Notify the Contractor that DoD officials intend to conduct an assessment of vulnerabilities to IAEA inspections or visits;

(ii) Notify the Contractor of the time at which the assessment will be conducted, at least 30 days prior to the assessment;

(iii) Provide the Contractor with advance notice of the credentials of the DoD officials who will conduct the assessment; and

(iv) To the maximum extent practicable, conduct the assessment in a manner that does not impede or delay operations at the Contractor's facility; and

(2) The Contractor shall provide access to the site and shall cooperate with DoD officials in the assessment of vulnerabilities to IAEA inspections or visits.

(d) Following a security assessment of the Contractor's facility, DoD officials will notify the Contractor as to—

(1) Whether the Contractor's facility has any vulnerabilities where potentially declarable activities under the U.S.-IAEA AP are taking place;

(2) Whether additional security measures are needed; and

(3) Whether DoD will apply a national security exclusion.

(e) If DoD applies a national security exclusion, the Contractor shall not grant access to IAEA inspectors.

(f) If DoD does not apply a national security exclusion, the Contractor shall apply managed access to prevent disclosure of program activities, locations, or information in the U.S. declaration.

(g) The Contractor shall not delay submission of any reports required by the Department of Commerce or the Nuclear Regulatory Commission while awaiting a DoD response to a notification provided in accordance with this clause.

(h) The Contractor shall incorporate the substance of this clause, including this paragraph (h), in all subcontracts that are subject to the provisions of the U.S.-IAEA AP.

(a) Definitions. As used in this provision—

Agency or instrumentality of the government of Venezuela, business operations, government of Venezuela, and person have the meaning given in the clause 252.225-7056, Prohibition Regarding Business Operations with the Maduro Regime, of this solicitation.

(b) Prohibition. In accordance with section 890 of the National Defense Authorization Act for Fiscal Year 2020 (Pub. L. 116-92), DoD is prohibited from entering into a contract for the procurement of products or services with any person that has business operations with an authority of the government of Venezuela that is not recognized as the legitimate government of Venezuela by the U.S. Government, unless the person has a valid license to operate in Venezuela issued by the Office of Foreign Assets Control of the Department of the Treasury.

(c) Representation. By submission of its offer, the Offeror represents that the Offeror is a person that—

(1) Does not have any business operations with an authority of the Maduro regime or the government of Venezuela that is not recognized as the legitimate government of Venezuela by the U.S. Government; or

(2) Has a valid license to operate in Venezuela issued by the Office of Foreign Assets Control of the Department of the Treasury.

(a) Definitions. As used in this clause—

Agency or instrumentality of the government of Venezuela means an agency or instrumentality of a foreign state as defined in 28 U.S.C. 1603(b), with each reference in section 1603(b) to a foreign state deemed to be a reference to Venezuela.

Business operations means engaging in commerce in any form, including acquiring, developing, maintaining, owning, selling, possessing, leasing, or operating equipment, facilities, personnel, products, services, personal property, real property, or any other apparatus of business or commerce.

Government of Venezuela means the government of any political subdivision of Venezuela, and any agency or instrumentality of the government of Venezuela.

Person means—

(1) A natural person, corporation, company, business association, partnership, society, trust, or any other nongovernmental entity, organization, or group;

(2) Any governmental entity or instrumentality of a government, including a multilateral development institution (as defined in section 1701(c)(3) of the International Financial Institutions Act (22 U.S.C. 262r(c)(3)); and

(3) Any successor, subunit, parent entity, or subsidiary of, or any entity under common ownership or control with, any entity described in paragraph (1) or (2) of this definition.

(b) Prohibition. In accordance with section 890 of the National Defense Authorization Act for Fiscal Year 2020 (Pub. L. 116-92), DoD is prohibited from entering into a contract for the procurement of products or services with any person that has business operations with an authority of the government of Venezuela that is not recognized as the legitimate government of Venezuela by the U.S. Government, unless the person has a valid license to operate in Venezuela issued by the Office of Foreign Assets Control of the Department of the Treasury.

(c) The Contractor shall—

(1) Not have any business operations with an authority of the Maduro regime or the government of Venezuela that is not recognized as the legitimate government of Venezuela by the U.S. Government; or

(2) Have a valid license to operate in Venezuela issued by the Office of Foreign Assets Control of the Department of the Treasury.

(d) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (d), in all subcontracts, including subcontracts for the acquisition of commercial products.

(a) Definitions. As used in this provision—

Covered contract and covered entity have the meaning given in the clause 252.225-7058, Postaward Disclosure of Employment of Individuals Who Work in the People's Republic of China.

(b) Prohibition on award. In accordance with section 855 of the National Defense Authorization Act for Fiscal Year 2022 (Pub. L. 117-81, 10 U.S.C. 4651 note prec.), DoD may not award a contract to the Offeror if it is a covered entity and proposes to employ one or more individuals who will perform work in the People's Republic of China on a covered contract, unless the Offeror has disclosed its use of workforce and facilities in the People's Republic of China.

(c) Preaward disclosure requirement. At the time of submission of an offer for a covered contract, an Offeror that is a covered entity shall provide disclosures to include—

(1) The proposed use of workforce on a covered contract or subcontract, if the Offeror employs one or more individuals who perform work in the People's Republic of China;

(2) The total number of such individuals who will perform work in the People's Republic of China; and

(3) A description of the physical presence, including street address or addresses, in the People's Republic of China, where work on the covered contract will be performed.

(a) Definitions. As used in this clause—

Covered contract means any DoD contract or subcontract with a value in excess of $5 million, not including contracts for commercial products and commercial services.

Covered entity means any corporation, company, limited liability company, limited partnership, business trust, business association, or other similar entity, including any subsidiary thereof, performing work on a covered contract in the People's Republic of China, including by leasing or owning real property used in the performance of the covered contract in the People's Republic of China.

(b) Disclosure requirement. (1) In accordance with section 855 of the National Defense Authorization Act for Fiscal Year 2022 (Pub. L. 117-81, 10 U.S.C. 4651 note prec.), DoD may not award, extend, or exercise an option on a covered contract with a covered entity unless such covered entity submits each required disclosure of its use of workforce and facilities in the People's Republic of China, if it employs one or more individuals who perform work in the People's Republic of China on a covered contract.

(2) If the Contractor is a covered entity, the Contractor shall disclose for the Government's fiscal years 2023 and 2024, the Contractor's employment of one or more individuals who perform work in the People's Republic of China on any covered contract. The disclosures shall include—

(i) The total number of such individuals who perform work in the People's Republic of China on the covered contracts funded by DoD; and

(ii) A description of the physical presence, including street address or addresses in the People's Republic of China, where work on the covered contract is performed.

(c) Subcontracts. The Contractor shall insert this clause, including this paragraph (c), without alteration other than to identify the appropriate parties, in all subcontracts that meet the definition of a covered contract.

(a) Definitions. Forced labor, and XUAR, as used in this provision, have the meaning given in the 252.225-7060, Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region, clause of this solicitation.

(b) Prohibition. DoD may not knowingly procure any products mined, produced, or manufactured wholly or in part by forced labor from XUAR or from an entity that has used labor from within or transferred from XUAR as part of any forced labor programs, as specified in paragraph (b) of the 252.225-7060, Prohibition on certain procurements from the Xinjiang Uyghur Autonomous Region, clause of this solicitation.

(c) Representation. By submission of its offer, the Offeror represents that it has made a good faith effort to determine that forced labor from XUAR will not be used in the performance of a contract resulting from this solicitation.

(a) Definitions. As used in this clause—

Forced labor means any work or service that is exacted from any person under the menace of any penalty for nonperformance and that the worker does not offer to perform (10 U.S.C. 2496).

XUAR means the Xinjiang Uyghur Autonomous Region of the People's Republic of China (10 U.S.C. 2496).

(b) Prohibition. In accordance with 10 U.S.C. 4661, none of the funds appropriated or otherwise made available for DoD may be used to knowingly procure any products mined, produced, or manufactured wholly or in part by forced labor from XUAR or from an entity that has used labor from within or transferred from XUAR. The Contractor shall make a good faith effort to determine that forced labor from XUAR will not be used in the performance of this contract (section 855, Pub. L. 117-263).

(c) Subcontracts. The Contractor shall insert this clause, including this paragraph (c), without alteration other than to identify the appropriate parties, in subcontracts including subcontracts for commercial products, commercial services, and commercially available off-the-shelf items.

(a) Definitions. As used in this clause—

Covered country means—

(1) The Democratic People's Republic of North Korea;

(2) The People's Republic of China;

(3) The Russian Federation; and

(4) The Islamic Republic of Iran.

Covered item means an article or item of—

(1) Personal protective equipment for use in preventing spread of disease, such as by exposure to infected individuals or contamination or infection by infectious material, including—

(i) Nitrile and vinyl gloves;

(ii) Surgical masks;

(iii) Respirator masks and powered air purifying respirators and required filters;

(iv) Face shields and protective eyewear;

(v) Surgical and isolation gowns and head and foot coverings; or

(vi) Clothing; and

(vii) The materials and components thereof, other than sensors, electronics, or other items added to and not normally associated with such personal protective equipment or clothing; or

(2) Sanitizing and disinfecting wipes, testing swabs, gauze, and bandages.

(b) Restriction. The Contractor shall not deliver under this contract a covered item from a covered country (10 U.S.C. 4875).

(c) Subcontracts. The Contractor shall insert this clause, including this paragraph (c), without alteration other than to identify the appropriate parties, in subcontracts valued above $150,000 that are for the acquisition of covered items, including subcontracts for commercial products, including commercially available off-the-shelf items, and commercial services.

(a) Definition. As used in this clause—

Large medium-speed diesel engines means diesel engines whose revolutions per minute (RPM) fall between 300 and 1500 RPM with a displacement greater than 1500 cubic inches per cylinder.

(b) Restriction. As required by 10 U.S.C. 4864, the Contractor shall deliver under this contract large medium-speed diesel engines manufactured in the United States, Australia, Canada, New Zealand, or the United Kingdom.

(c) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (c), in subcontracts that exceed the simplified acquisition threshold, including subcontracts for commercial products and commercial services, that require large medium-speed diesel engines for new construction of auxiliary ships.