Collapse to view only § 3592. Rules of origin for textile and apparel products

§ 3591. Textile product integration

Not later than 120 days after the date that the WTO Agreement enters into force with respect to the United States, the Secretary of Commerce shall publish in the Federal Register a notice containing the list of products to be integrated in each stage set out in Article 2(8) of the Agreement on Textiles and Clothing referred to in section 3511(d)(4) of this title. After publication of such list, the list may not be changed unless otherwise required by statute or the international obligations of the United States, to correct technical errors, or to reflect reclassifications. Within 30 days after the publication of such list, the Trade Representative shall notify the list to the Textiles Monitoring Body established under Article 8 of the Agreement on Textiles and Clothing.

(Pub. L. 103–465, title III, § 331, Dec. 8, 1994, 108 Stat. 4947; Pub. L. 104–295, § 20(c)(7), Oct. 11, 1996, 110 Stat. 3528.)
§ 3592. Rules of origin for textile and apparel products
(a) Regulatory authority
(b) Principles
(1) In generalExcept as otherwise provided for by statute, a textile or apparel product, for purposes of the customs laws and the administration of quantitative restrictions, originates in a country, territory, or insular possession, and is the growth, product, or manufacture of that country, territory, or insular possession, if—
(A) the product is wholly obtained or produced in that country, territory, or possession;
(B) the product is a yarn, thread, twine, cordage, rope, cable, or braiding and—
(i) the constituent staple fibers are spun in that country, territory, or possession, or
(ii) the continuous filament is extruded in that country, territory, or possession;
(C) the product is a fabric, including a fabric classified under chapter 59 of the HTS, and the constituent fibers, filaments, or yarns are woven, knitted, needled, tufted, felted, entangled, or transformed by any other fabric-making process in that country, territory, or possession; or
(D) the product is any other textile or apparel product that is wholly assembled in that country, territory, or possession from its component pieces.
(2) Special rules
(A) Notwithstanding paragraph (1)(D) and except as provided in subparagraphs (B) and (C)—
(i) the origin of a good that is classified under one of the following HTS headings or subheadings shall be determined under subparagraph (A), (B), or (C) of paragraph (1), as appropriate: 5609, 5807, 5811, 6209.20.50.40, 6213, 6214, 6301, 6302, 6303, 6304, 6305, 6306, 6307.10, 6307.90, 6308, or 9404.90; and
(ii) a textile or apparel product which is knit to shape shall be considered to originate in, and be the growth, product, or manufacture of, the country, territory, or possession in which it is knit.
(B) Notwithstanding paragraph (1)(C), fabric classified under the HTS as of silk, cotton, man-made fiber, or vegetable fiber shall be considered to originate in, and be the growth, product, or manufacture of, the country, territory, or possession in which the fabric is both dyed and printed when accompanied by two or more of the following finishing operations: bleaching, shrinking, fulling, napping, decating, permanent stiffening, weighting, permanent embossing, or moireing.
(C) Notwithstanding paragraph (1)(D), goods classified under HTS span 6117.10, 6213.00, 6214.00, 6302.22, 6302.29, 6302.52, 6302.53, 6302.59, 6302.92, 6302.93, 6302.99, 6303.92, 6303.99, 6304.19, 6304.93, 6304.99, 9404.90.85, or 9404.90.95, except for goods classified under such headings as of cotton or of wool or consisting of fiber blends containing 16 percent or more by weight of cotton, shall be considered to originate in, and be the growth, product, or manufacture of, the country, territory, or possession in which the fabric is both dyed and printed when accompanied by two or more of the following finishing operations: bleaching, shrinking, fulling, napping, decating, permanent stiffening, weighting, permanent embossing, or moireing.
(3) Multicountry ruleIf the origin of a good cannot be determined under paragraph (1) or (2), then that good shall be considered to originate in, and be the growth, product, or manufacture of—
(A) the country, territory, or possession in which the most important assembly or manufacturing process occurs, or
(B) if the origin of the good cannot be determined under subparagraph (A), the last country, territory, or possession in which important assembly or manufacturing occurs.
(4) Components cut in the United States
(A) The value of a component that is cut to shape (but not to length, width, or both) in the United States from foreign fabric and exported to another country, territory, or insular possession for assembly into an article that is then returned to the United States—
(i) shall not be included in the dutiable value of such article, and
(ii) may be applied toward determining the percentage referred to in General Note 7(b)(i)(B) of the HTS, subject to the limitation provided in that note.
(B) No article (except a textile or apparel product) assembled in whole of components described in subparagraph (A), or of such components and components that are products of the United States, in a beneficiary country as defined in General Note 7(a) of the HTS shall be treated as a foreign article, or as subject to duty if—
(i) the components after exportation from the United States, and
(ii) the article itself before importation into the United States
do not enter into the commerce of any foreign country other than such a beneficiary country.
(5) Exception for United States-Israel Free Trade Agreement
(c) Effective dateThis section shall apply to goods entered, or withdrawn from warehouse, for consumption on or after July 1, 1996, except that this section shall not apply to goods if—
(1) the contract for the sale of such goods to the United States is entered into before July 20, 1994;
(2) all of the material terms of sale in such contract, including the price and quantity of the goods, are fixed and determinable before July 20, 1994;
(3) a copy of the contract is filed with the Commissioner of Customs within 60 days after December 8, 1994, together with a certification that the contract meets the requirements of paragraphs (1) and (2); and
(4) the goods are entered, or withdrawn from warehouse, for consumption on or before January 1, 1998.
The origin of goods to which this section does not apply shall be determined in accordance with the applicable rules in effect on July 20, 1994.
(Pub. L. 103–465, title III, § 334, Dec. 8, 1994, 108 Stat. 4949; Pub. L. 104–295, § 20(c)(9), Oct. 11, 1996, 110 Stat. 3528; Pub. L. 106–200, title IV, § 405(a), May 18, 2000, 114 Stat. 292.)