Collapse to view only § 7550. Definitions
- § 7521. Emission standards for new motor vehicles or new motor vehicle engines
- § 7522. Prohibited acts
- § 7523. Actions to restrain violations
- § 7524. Civil penalties
- § 7525. Motor vehicle and motor vehicle engine compliance testing and certification
- § 7541. Compliance by vehicles and engines in actual use
- § 7542. Information collection
- § 7543. State standards
- § 7544. State grants
- § 7545. Regulation of fuels
- § 7546. Renewable fuel
- § 7547. Nonroad engines and vehicles
- § 7548. Study of particulate emissions from motor vehicles
- § 7549. High altitude performance adjustments
- § 7550. Definitions
- § 7551. Omitted
- § 7552. Motor vehicle compliance program fees
- § 7553. Prohibition on production of engines requiring leaded gasoline
- § 7554. Urban bus standards
§ 7521. Emission standards for new motor vehicles or new motor vehicle engines
(a) Authority of Administrator to prescribe by regulationExcept as otherwise provided in subsection (b)—
(1) The Administrator shall by regulation prescribe (and from time to time revise) in accordance with the provisions of this section, standards applicable to the emission of any air pollutant from any class or classes of new motor vehicles or new motor vehicle engines, which in his judgment cause, or contribute to, air pollution which may reasonably be anticipated to endanger public health or welfare. Such standards shall be applicable to such vehicles and engines for their useful life (as determined under subsection (d), relating to useful life of vehicles for purposes of certification), whether such vehicles and engines are designed as complete systems or incorporate devices to prevent or control such pollution.
(2) Any regulation prescribed under paragraph (1) of this subsection (and any revision thereof) shall take effect after such period as the Administrator finds necessary to permit the development and application of the requisite technology, giving appropriate consideration to the cost of compliance within such period.
(3)
(A)In general.—
(i) Unless the standard is changed as provided in subparagraph (B), regulations under paragraph (1) of this subsection applicable to emissions of hydrocarbons, carbon monoxide, oxides of nitrogen, and particulate matter from classes or categories of heavy-duty vehicles or engines manufactured during or after model year 1983 shall contain standards which reflect the greatest degree of emission reduction achievable through the application of technology which the Administrator determines will be available for the model year to which such standards apply, giving appropriate consideration to cost, energy, and safety factors associated with the application of such technology.
(ii) In establishing classes or categories of vehicles or engines for purposes of regulations under this paragraph, the Administrator may base such classes or categories on gross vehicle weight, horsepower, type of fuel used, or other appropriate factors.
(B)Revised standards for heavy duty trucks.—
(i) On the basis of information available to the Administrator concerning the effects of air pollutants emitted from heavy-duty vehicles or engines and from other sources of mobile source related pollutants on the public health and welfare, and taking costs into account, the Administrator may promulgate regulations under paragraph (1) of this subsection revising any standard promulgated under, or before the date of, the enactment of the Clean Air Act Amendments of 1990 (or previously revised under this subparagraph) and applicable to classes or categories of heavy-duty vehicles or engines.
(ii) Effective for the model year 1998 and thereafter, the regulations under paragraph (1) of this subsection applicable to emissions of oxides of nitrogen (NOx) from gasoline and diesel-fueled heavy duty trucks shall contain standards which provide that such emissions may not exceed 4.0 grams per brake horsepower hour (gbh).
(C)Lead time and stability.—Any standard promulgated or revised under this paragraph and applicable to classes or categories of heavy-duty vehicles or engines shall apply for a period of no less than 3 model years beginning no earlier than the model year commencing 4 years after such revised standard is promulgated.
(D)Rebuilding practices.—The Administrator shall study the practice of rebuilding heavy-duty engines and the impact rebuilding has on engine emissions. On the basis of that study and other information available to the Administrator, the Administrator may prescribe requirements to control rebuilding practices, including standards applicable to emissions from any rebuilt heavy-duty engines (whether or not the engine is past its statutory useful life), which in the Administrator’s judgment cause, or contribute to, air pollution which may reasonably be anticipated to endanger public health or welfare taking costs into account. Any regulation shall take effect after a period the Administrator finds necessary to permit the development and application of the requisite control measures, giving appropriate consideration to the cost of compliance within the period and energy and safety factors.
(E)Motorcycles.—For purposes of this paragraph, motorcycles and motorcycle engines shall be treated in the same manner as heavy-duty vehicles and engines (except as otherwise permitted under section 7525(f)(1) 1
1 See References in Text note below.
of this title) unless the Administrator promulgates a rule reclassifying motorcycles as light-duty vehicles within the meaning of this section or unless the Administrator promulgates regulations under subsection (a) applying standards applicable to the emission of air pollutants from motorcycles as a separate class or category. In any case in which such standards are promulgated for such emissions from motorcycles as a separate class or category, the Administrator, in promulgating such standards, shall consider the need to achieve equivalency of emission reductions between motorcycles and other motor vehicles to the maximum extent practicable.(4)
(A) Effective with respect to vehicles and engines manufactured after model year 1978, no emission control device, system, or element of design shall be used in a new motor vehicle or new motor vehicle engine for purposes of complying with requirements prescribed under this subchapter if such device, system, or element of design will cause or contribute to an unreasonable risk to public health, welfare, or safety in its operation or function.
(B) In determining whether an unreasonable risk exists under subparagraph (A), the Administrator shall consider, among other factors, (i) whether and to what extent the use of any device, system, or element of design causes, increases, reduces, or eliminates emissions of any unregulated pollutants; (ii) available methods for reducing or eliminating any risk to public health, welfare, or safety which may be associated with the use of such device, system, or element of design, and (iii) the availability of other devices, systems, or elements of design which may be used to conform to requirements prescribed under this subchapter without causing or contributing to such unreasonable risk. The Administrator shall include in the consideration required by this paragraph all relevant information developed pursuant to section 7548 of this title.
(5)
(A) If the Administrator promulgates final regulations which define the degree of control required and the test procedures by which compliance could be determined for gasoline vapor recovery of uncontrolled emissions from the fueling of motor vehicles, the Administrator shall, after consultation with the Secretary of Transportation with respect to motor vehicle safety, prescribe, by regulation, fill pipe standards for new motor vehicles in order to insure effective connection between such fill pipe and any vapor recovery system which the Administrator determines may be required to comply with such vapor recovery regulations. In promulgating such standards the Administrator shall take into consideration limits on fill pipe diameter, minimum design criteria for nozzle retainer lips, limits on the location of the unleaded fuel restrictors, a minimum access zone surrounding a fill pipe, a minimum pipe or nozzle insertion angle, and such other factors as he deems pertinent.
(B) Regulations prescribing standards under subparagraph (A) shall not become effective until the introduction of the model year for which it would be feasible to implement such standards, taking into consideration the restraints of an adequate leadtime for design and production.
(C) Nothing in subparagraph (A) shall (i) prevent the Administrator from specifying different nozzle and fill neck sizes for gasoline with additives and gasoline without additives or (ii) permit the Administrator to require a specific location, configuration, modeling, or styling of the motor vehicle body with respect to the fuel tank fill neck or fill nozzle clearance envelope.
(D) For the purpose of this paragraph, the term “fill pipe” shall include the fuel tank fill pipe, fill neck, fill inlet, and closure.
(6)Onboard vapor recovery.—Within 1 year after November 15, 1990, the Administrator shall, after consultation with the Secretary of Transportation regarding the safety of vehicle-based (“onboard”) systems for the control of vehicle refueling emissions, promulgate standards under this section requiring that new light-duty vehicles manufactured beginning in the fourth model year after the model year in which the standards are promulgated and thereafter shall be equipped with such systems. The standards required under this paragraph shall apply to a percentage of each manufacturer’s fleet of new light-duty vehicles beginning with the fourth model year after the model year in which the standards are promulgated. The percentage shall be as specified in the following table:
Implementation Schedule for Onboard Vapor Recovery Requirements | Model year commencing after standards promulgated | Percentage* | *Percentages in the table refer to a percentage of the manufacturer’s sales volume. | Fourth | 40 | Fifth | 80 | After Fifth | 100 |
|---|
The standards shall require that such systems provide a minimum evaporative emission capture efficiency of 95 percent. The requirements of section 7511a(b)(3) of this title (relating to stage II gasoline vapor recovery) for areas classified under section 7511 of this title as moderate for ozone shall not apply after promulgation of such standards and the Administrator may, by rule, revise or waive the application of the requirements of such section 7511a(b)(3) of this title for areas classified under section 7511 of this title as Serious, Severe, or Extreme for ozone, as appropriate, after such time as the Administrator determines that onboard emissions control systems required under this paragraph are in widespread use throughout the motor vehicle fleet.
(b) Emissions of carbon monoxide, hydrocarbons, and oxides of nitrogen; annual report to Congress; waiver of emission standards; research objectives
(1)
(A) The regulations under subsection (a) applicable to emissions of carbon monoxide and hydrocarbons from light-duty vehicles and engines manufactured during model years 1977 through 1979 shall contain standards which provide that such emissions from such vehicles and engines may not exceed 1.5 grams per vehicle mile of hydrocarbons and 15.0 grams per vehicle mile of carbon monoxide. The regulations under subsection (a) applicable to emissions of carbon monoxide from light-duty vehicles and engines manufactured during the model year 1980 shall contain standards which provide that such emissions may not exceed 7.0 grams per vehicle mile. The regulations under subsection (a) applicable to emissions of hydrocarbons from light-duty vehicles and engines manufactured during or after model year 1980 shall contain standards which require a reduction of at least 90 percent from emissions of such pollutant allowable under the standards under this section applicable to light-duty vehicles and engines manufactured in model year 1970. Unless waived as provided in paragraph (5),1 regulations under subsection (a) applicable to emissions of carbon monoxide from light-duty vehicles and engines manufactured during or after the model year 1981 shall contain standards which require a reduction of at least 90 percent from emissions of such pollutant allowable under the standards under this section applicable to light-duty vehicles and engines manufactured in model year 1970.
(B) The regulations under subsection (a) applicable to emissions of oxides of nitrogen from light-duty vehicles and engines manufactured during model years 1977 through 1980 shall contain standards which provide that such emissions from such vehicles and engines may not exceed 2.0 grams per vehicle mile. The regulations under subsection (a) applicable to emissions of oxides of nitrogen from light-duty vehicles and engines manufactured during the model year 1981 and thereafter shall contain standards which provide that such emissions from such vehicles and engines may not exceed 1.0 gram per vehicle mile. The Administrator shall prescribe standards in lieu of those required by the preceding sentence, which provide that emissions of oxides of nitrogen may not exceed 2.0 grams per vehicle mile for any light-duty vehicle manufactured during model years 1981 and 1982 by any manufacturer whose production, by corporate identity, for calendar year 1976 was less than three hundred thousand light-duty motor vehicles worldwide if the Administrator determines that—
(i) the ability of such manufacturer to meet emission standards in the 1975 and subsequent model years was, and is, primarily dependent upon technology developed by other manufacturers and purchased from such manufacturers; and
(ii) such manufacturer lacks the financial resources and technological ability to develop such technology.
(C) The Administrator may promulgate regulations under subsection (a)(1) revising any standard prescribed or previously revised under this subsection, as needed to protect public health or welfare, taking costs, energy, and safety into account. Any revised standard shall require a reduction of emissions from the standard that was previously applicable. Any such revision under this subchapter may provide for a phase-in of the standard. It is the intent of Congress that the numerical emission standards specified in subsections (a)(3)(B)(ii), (g), (h), and (i) shall not be modified by the Administrator after November 15, 1990, for any model year before the model year 2004.
(2) Emission standards under paragraph (1), and measurement techniques on which such standards are based (if not promulgated prior to November 15, 1990), shall be promulgated by regulation within 180 days after November 15, 1990.
(3) For purposes of this part—
(A)
(i) The term “model year” with reference to any specific calendar year means the manufacturer’s annual production period (as determined by the Administrator) which includes January 1 of such calendar year. If the manufacturer has no annual production period, the term “model year” shall mean the calendar year.
(ii) For the purpose of assuring that vehicles and engines manufactured before the beginning of a model year were not manufactured for purposes of circumventing the effective date of a standard required to be prescribed by subsection (b), the Administrator may prescribe regulations defining “model year” otherwise than as provided in clause (i).
(B) Repealed. Pub. L. 101–549, title II, § 230(1), Nov. 15, 1990, 104 Stat. 2529.
(C) The term “heavy duty vehicle” means a truck, bus, or other vehicle manufactured primarily for use on the public streets, roads, and highways (not including any vehicle operated exclusively on a rail or rails) which has a gross vehicle weight (as determined under regulations promulgated by the Administrator) in excess of six thousand pounds. Such term includes any such vehicle which has special features enabling off-street or off-highway operation and use.
(3)2
2 So in original. Probably should be “(4)”.
Upon the petition of any manufacturer, the Administrator, after notice and opportunity for public hearing, may waive the standard required under subparagraph (B) of paragraph (1) to not exceed 1.5 grams of oxides of nitrogen per vehicle mile for any class or category of light-duty vehicles or engines manufactured by such manufacturer during any period of up to four model years beginning after the model year 1980 if the manufacturer demonstrates that such waiver is necessary to permit the use of an innovative power train technology, or innovative emission control device or system, in such class or category of vehicles or engines and that such technology or system was not utilized by more than 1 percent of the light-duty vehicles sold in the United States in the 1975 model year. Such waiver may be granted only if the Administrator determines—(A) that such waiver would not endanger public health,
(B) that there is a substantial likelihood that the vehicles or engines will be able to comply with the applicable standard under this section at the expiration of the waiver, and
(C) that the technology or system has a potential for long-term air quality benefit and has the potential to meet or exceed the average fuel economy standard applicable under the Energy Policy and Conservation Act [42 U.S.C. 6201 et seq.] upon the expiration of the waiver.
No waiver under this subparagraph 3
3 So in original. Probably should be “paragraph”.
granted to any manufacturer shall apply to more than 5 percent of such manufacturer’s production or more than fifty thousand vehicles or engines, whichever is greater.(c) Feasibility study and investigation by National Academy of Sciences; reports to Administrator and Congress; availability of information
(1) The Administrator shall undertake to enter into appropriate arrangements with the National Academy of Sciences to conduct a comprehensive study and investigation of the technological feasibility of meeting the emissions standards required to be prescribed by the Administrator by subsection (b) of this section.
(2) Of the funds authorized to be appropriated to the Administrator by this chapter, such amounts as are required shall be available to carry out the study and investigation authorized by paragraph (1) of this subsection.
(3) In entering into any arrangement with the National Academy of Sciences for conducting the study and investigation authorized by paragraph (1) of this subsection, the Administrator shall request the National Academy of Sciences to submit semiannual reports on the progress of its study and investigation to the Administrator and the Congress, beginning not later than July 1, 1971, and continuing until such study and investigation is completed.
(4) The Administrator shall furnish to such Academy at its request any information which the Academy deems necessary for the purpose of conducting the investigation and study authorized by paragraph (1) of this subsection. For the purpose of furnishing such information, the Administrator may use any authority he has under this chapter (A) to obtain information from any person, and (B) to require such person to conduct such tests, keep such records, and make such reports respecting research or other activities conducted by such person as may be reasonably necessary to carry out this subsection.
(d) Useful life of vehiclesThe Administrator shall prescribe regulations under which the useful life of vehicles and engines shall be determined for purposes of subsection (a)(1) of this section and section 7541 of this title. Such regulations shall provide that except where a different useful life period is specified in this subchapter useful life shall—
(1) in the case of light duty vehicles and light duty vehicle engines and light-duty trucks up to 3,750 lbs. LVW and up to 6,000 lbs. GVWR, be a period of use of five years or fifty thousand miles (or the equivalent), whichever first occurs, except that in the case of any requirement of this section which first becomes applicable after November 15, 1990, where the useful life period is not otherwise specified for such vehicles and engines, the period shall be 10 years or 100,000 miles (or the equivalent), whichever first occurs, with testing for purposes of in-use compliance under section 7541 of this title up to (but not beyond) 7 years or 75,000 miles (or the equivalent), whichever first occurs;
(2) in the case of any other motor vehicle or motor vehicle engine (other than motorcycles or motorcycle engines), be a period of use set forth in paragraph (1) unless the Administrator determines that a period of use of greater duration or mileage is appropriate; and
(3) in the case of any motorcycle or motorcycle engine, be a period of use the Administrator shall determine.
(e) New power sources or propulsion systems
(f)4
4 Another subsec. (f) is set out after subsec. (m).
High altitude regulations(1) The high altitude regulation in effect with respect to model year 1977 motor vehicles shall not apply to the manufacture, distribution, or sale of 1978 and later model year motor vehicles. Any future regulation affecting the sale or distribution of motor vehicles or engines manufactured before the model year 1984 in high altitude areas of the country shall take effect no earlier than model year 1981.
(2) Any such future regulation applicable to high altitude vehicles or engines shall not require a percentage of reduction in the emissions of such vehicles which is greater than the required percentage of reduction in emissions from motor vehicles as set forth in subsection (b). This percentage reduction shall be determined by comparing any proposed high altitude emission standards to high altitude emissions from vehicles manufactured during model year 1970. In no event shall regulations applicable to high altitude vehicles manufactured before the model year 1984 establish a numerical standard which is more stringent than that applicable to vehicles certified under non-high altitude conditions.
(3)Section 7607(d) of this title shall apply to any high altitude regulation referred to in paragraph (2) and before promulgating any such regulation, the Administrator shall consider and make a finding with respect to—
(A) the economic impact upon consumers, individual high altitude dealers, and the automobile industry of any such regulation, including the economic impact which was experienced as a result of the regulation imposed during model year 1977 with respect to high altitude certification requirements;
(B) the present and future availability of emission control technology capable of meeting the applicable vehicle and engine emission requirements without reducing model availability; and
(C) the likelihood that the adoption of such a high altitude regulation will result in any significant improvement in air quality in any area to which it shall apply.
(g) Light-duty trucks up to 6,000 lbs. GVWR and light-duty vehicles; standards for model years after 1993
(1) NMHC, CO, and NOx
(2) PM Standard
(h) Light-duty trucks of more than 6,000 lbs. GVWR; standards for model years after 1995
(i) Phase II study for certain light-duty vehicles and light-duty trucks
(1) The Administrator, with the participation of the Office of Technology Assessment, shall study whether or not further reductions in emissions from light-duty vehicles and light-duty trucks should be required pursuant to this subchapter. The study shall consider whether to establish with respect to model years commencing after January 1, 2003, the standards and useful life period for gasoline and diesel-fueled light-duty vehicles and light-duty trucks with a loaded vehicle weight (LVW) of 3,750 lbs. or less specified in the following table:
table 3—pending emission standards for gasoline and diesel fueled light-duty vehicles and light-duty trucks 3,750 lbs. lvw or less | Pollutant | Emission level* | *Emission levels are expressed in grams per mile (GPM). For vehicles and engines subject to this subsection for purposes of subsection (d) and any reference thereto, the useful life of such vehicles and engines shall be a period of 10 years or 100,000 miles (or the equivalent), whichever first occurs. | NMHC | 0.125 GPM | NOx | 0.2 GPM | CO | 1.7 GPM |
|---|
Such study shall also consider other standards and useful life periods which are more stringent or less stringent than those set forth in table 3 (but more stringent than those referred to in subsections (g) and (h)).
(2)
(A) As part of the study under paragraph (1), the Administrator shall examine the need for further reductions in emissions in order to attain or maintain the national ambient air quality standards, taking into consideration the waiver provisions of section 7543(b) of this title. As part of such study, the Administrator shall also examine—
(i) the availability of technology (including the costs thereof), in the case of light-duty vehicles and light-duty trucks with a loaded vehicle weight (LVW) of 3,750 lbs. or less, for meeting more stringent emission standards than those provided in subsections (g) and (h) for model years commencing not earlier than after January 1, 2003, and not later than model year 2006, including the lead time and safety and energy impacts of meeting more stringent emission standards; and
(ii) the need for, and cost effectiveness of, obtaining further reductions in emissions from such light-duty vehicles and light-duty trucks, taking into consideration alternative means of attaining or maintaining the national primary ambient air quality standards pursuant to State implementation plans and other requirements of this chapter, including their feasibility and cost effectiveness.
(B) The Administrator shall submit a report to Congress no later than June 1, 1997, containing the results of the study under this subsection, including the results of the examination conducted under subparagraph (A). Before submittal of such report the Administrator shall provide a reasonable opportunity for public comment and shall include a summary of such comments in the report to Congress.
(3)
(A) Based on the study under paragraph (1) the Administrator shall determine, by rule, within 3 calendar years after the report is submitted to Congress, but not later than December 31, 1999, whether—
(i) there is a need for further reductions in emissions as provided in paragraph (2)(A);
(ii) the technology for meeting more stringent emission standards will be available, as provided in paragraph (2)(A)(i), in the case of light-duty vehicles and light-duty trucks with a loaded vehicle weight (LVW) of 3,750 lbs. or less, for model years commencing not earlier than January 1, 2003, and not later than model year 2006, considering the factors listed in paragraph (2)(A)(i); and
(iii) obtaining further reductions in emissions from such vehicles will be needed and cost effective, taking into consideration alternatives as provided in paragraph (2)(A)(ii).
The rulemaking under this paragraph shall commence within 3 months after submission of the report to Congress under paragraph (2)(B).
(B) If the Administrator determines under subparagraph (A) that—
(i) there is no need for further reductions in emissions as provided in paragraph (2)(A);
(ii) the technology for meeting more stringent emission standards will not be available as provided in paragraph (2)(A)(i), in the case of light-duty vehicles and light-duty trucks with a loaded vehicle weight (LVW) of 3,750 lbs. or less, for model years commencing not earlier than January 1, 2003, and not later than model year 2006, considering the factors listed in paragraph (2)(A)(i); or
(iii) obtaining further reductions in emissions from such vehicles will not be needed or cost effective, taking into consideration alternatives as provided in paragraph (2)(A)(ii),
the Administrator shall not promulgate more stringent standards than those in effect pursuant to subsections (g) and (h). Nothing in this paragraph shall prohibit the Administrator from exercising the Administrator’s authority under subsection (a) to promulgate more stringent standards for light-duty vehicles and light-duty trucks with a loaded vehicle weight (LVW) of 3,750 lbs. or less at any other time thereafter in accordance with subsection (a).
(C) If the Administrator determines under subparagraph (A) that—
(i) there is a need for further reductions in emissions as provided in paragraph (2)(A);
(ii) the technology for meeting more stringent emission standards will be available, as provided in paragraph (2)(A)(i), in the case of light-duty vehicles and light-duty trucks with a loaded vehicle weight (LVW) of 3,750 lbs. or less, for model years commencing not earlier than January 1, 2003, and not later than model year 2006, considering the factors listed in paragraph (2)(A)(i); and
(iii) obtaining further reductions in emissions from such vehicles will be needed and cost effective, taking into consideration alternatives as provided in paragraph (2)(A)(ii),
the Administrator shall either promulgate the standards (and useful life periods) set forth in Table 3 in paragraph (1) or promulgate alternative standards (and useful life periods) which are more stringent than those referred to in subsections (g) and (h). Any such standards (or useful life periods) promulgated by the Administrator shall take effect with respect to any such vehicles or engines no earlier than the model year 2003 but not later than model year 2006, as determined by the Administrator in the rule.
(D) Nothing in this paragraph shall be construed by the Administrator or by a court as a presumption that any standards (or useful life period) set forth in Table 3 shall be promulgated in the rulemaking required under this paragraph. The action required of the Administrator in accordance with this paragraph shall be treated as a nondiscretionary duty for purposes of section 7604(a)(2) of this title (relating to citizen suits).
(E) Unless the Administrator determines not to promulgate more stringent standards as provided in subparagraph (B) or to postpone the effective date of standards referred to in Table 3 in paragraph (1) or to establish alternative standards as provided in subparagraph (C), effective with respect to model years commencing after January 1, 2003, the regulations under subsection (a) applicable to emissions of nonmethane hydrocarbons (NMHC), oxides of nitrogen (NOx), and carbon monoxide (CO) from motor vehicles and motor vehicle engines in the classes specified in Table 3 in paragraph (1) above shall contain standards which provide that emissions may not exceed the pending emission levels specified in Table 3 in paragraph (1).
(j) Cold CO standard
(1) Phase I
(2) Phase II
(A) Not later than June 1, 1997, the Administrator shall complete a study assessing the need for further reductions in emissions of carbon monoxide and the maximum reductions in such emissions achievable from model year 2001 and later model year light-duty vehicles and light-duty trucks when operated at 20 degrees Fahrenheit.
(B)
(i) If as of June 1, 1997, 6 or more nonattainment areas have a carbon monoxide design value of 9.5 ppm or greater, the regulations under subsection (a)(1) of this section applicable to emissions of carbon monoxide from model year 2002 and later model year light-duty vehicles and light-duty trucks shall contain standards which provide that emissions of carbon monoxide from such vehicles and trucks when operated at 20 degrees Fahrenheit may not exceed 3.4 grams per mile (gpm) in the case of light-duty vehicles and 4.4 grams per mile (gpm) in the case of light-duty trucks up to 6,000 GVWR and a level comparable in stringency in the case of light-duty trucks 6,000 GVWR and above.
(ii) In determining for purposes of this subparagraph whether 6 or more nonattainment areas have a carbon monoxide design value of 9.5 ppm or greater, the Administrator shall exclude the areas of Steubenville, Ohio, and Oshkosh, Wisconsin.
(3) Useful-life for phase I and phase II standards
(4) Heavy-duty vehicles and engines
(k) Control of evaporative emissionsThe Administrator shall promulgate (and from time to time revise) regulations applicable to evaporative emissions of hydrocarbons from all gasoline-fueled motor vehicles—
(1) during operation; and
(2) over 2 or more days of nonuse;
under ozone-prone summertime conditions (as determined by regulations of the Administrator). The regulations shall take effect as expeditiously as possible and shall require the greatest degree of emission reduction achievable by means reasonably expected to be available for production during any model year to which the regulations apply, giving appropriate consideration to fuel volatility, and to cost, energy, and safety factors associated with the application of the appropriate technology. The Administrator shall commence a rulemaking under this subsection within 12 months after November 15, 1990. If final regulations are not promulgated under this subsection within 18 months after November 15, 1990, the Administrator shall submit a statement to the Congress containing an explanation of the reasons for the delay and a date certain for promulgation of such final regulations in accordance with this chapter. Such date certain shall not be later than 15 months after the expiration of such 18 month deadline.
(l) Mobile source-related air toxics
(1) Study
(2) Standards
(m) Emissions control diagnostics
(1) RegulationsWithin 18 months after November 15, 1990, the Administrator shall promulgate regulations under subsection (a) requiring manufacturers to install on all new light duty vehicles and light duty trucks diagnostics systems capable of—
(A) accurately identifying for the vehicle’s useful life as established under this section, emission-related systems deterioration or malfunction, including, at a minimum, the catalytic converter and oxygen sensor, which could cause or result in failure of the vehicles to comply with emission standards established under this section,
(B) alerting the vehicle’s owner or operator to the likely need for emission-related components or systems maintenance or repair,
(C) storing and retrieving fault codes specified by the Administrator, and
(D) providing access to stored information in a manner specified by the Administrator.
The Administrator may, in the Administrator’s discretion, promulgate regulations requiring manufacturers to install such onboard diagnostic systems on heavy-duty vehicles and engines.
(2) Effective date
(3) State inspection
(4) Specific requirementsIn promulgating regulations under this subsection, the Administrator shall require—
(A) that any connectors through which the emission control diagnostics system is accessed for inspection, diagnosis, service, or repair shall be standard and uniform on all motor vehicles and motor vehicle engines;
(B) that access to the emission control diagnostics system through such connectors shall be unrestricted and shall not require any access code or any device which is only available from a vehicle manufacturer; and
(C) that the output of the data from the emission control diagnostics system through such connectors shall be usable without the need for any unique decoding information or device.
(5) Information availability
(f)5
5 So in original. Probably should be “(n)”.
Model years after 1990(July 14, 1955, ch. 360, title II, § 202, as added Pub. L. 89–272, title I, § 101(8), Oct. 20, 1965, 79 Stat. 992; amended Pub. L. 90–148, § 2, Nov. 21, 1967, 81 Stat. 499; Pub. L. 91–604, § 6(a), Dec. 31, 1970, 84 Stat. 1690; Pub. L. 93–319, § 5, June 22, 1974, 88 Stat. 258; Pub. L. 95–95, title II, §§ 201, 202(b), 213(b), 214(a), 215–217, 224(a), (b), (g), title IV, § 401(d), Aug. 7, 1977, 91 Stat. 751–753, 758–761, 765, 767, 769, 791; Pub. L. 95–190, § 14(a)(60)–(65), (b)(5), Nov. 16, 1977, 91 Stat. 1403, 1405; Pub. L. 101–549, title II, §§ 201–207, 227(b), 230(1)–(5), Nov. 15, 1990, 104 Stat. 2472–2481, 2507, 2529.)
§ 7522. Prohibited acts
(a) Enumerated prohibitionsThe following acts and the causing thereof are prohibited—
(1) in the case of a manufacturer of new motor vehicles or new motor vehicle engines for distribution in commerce, the sale, or the offering for sale, or the introduction, or delivery for introduction, into commerce, or (in the case of any person, except as provided by regulation of the Administrator), the importation into the United States, of any new motor vehicle or new motor vehicle engine, manufactured after the effective date of regulations under this part which are applicable to such vehicle or engine unless such vehicle or engine is covered by a certificate of conformity issued (and in effect) under regulations prescribed under this part or part C in the case of clean-fuel vehicles (except as provided in subsection (b));
(2)
(A) for any person to fail or refuse to permit access to or copying of records or to fail to make reports or provide information required under section 7542 of this title;
(B) for any person to fail or refuse to permit entry, testing or inspection authorized under section 7525(c) of this title or section 7542 of this title;
(C) for any person to fail or refuse to perform tests, or have tests performed as required under section 7542 of this title;
(D) for any manufacturer to fail to make information available as provided by regulation under section 7521(m)(5) of this title;
(3)
(A) for any person to remove or render inoperative any device or element of design installed on or in a motor vehicle or motor vehicle engine in compliance with regulations under this subchapter prior to its sale and delivery to the ultimate purchaser, or for any person knowingly to remove or render inoperative any such device or element of design after such sale and delivery to the ultimate purchaser; or
(B) for any person to manufacture or sell, or offer to sell, or install, any part or component intended for use with, or as part of, any motor vehicle or motor vehicle engine, where a principal effect of the part or component is to bypass, defeat, or render inoperative any device or element of design installed on or in a motor vehicle or motor vehicle engine in compliance with regulations under this subchapter, and where the person knows or should know that such part or component is being offered for sale or installed for such use or put to such use; or
(4) for any manufacturer of a new motor vehicle or new motor vehicle engine subject to standards prescribed under section 7521 of this title or part C—
(A) to sell or lease any such vehicle or engine unless such manufacturer has complied with (i) the requirements of section 7541(a) and (b) of this title with respect to such vehicle or engine, and unless a label or tag is affixed to such vehicle or engine in accordance with section 7541(c)(3) of this title, or (ii) the corresponding requirements of part C in the case of clean fuel vehicles unless the manufacturer has complied with the corresponding requirements of part C 1
1 So in original. Probably should be followed by a comma.
(B) to fail or refuse to comply with the requirements of section 7541(c) or (e) of this title, or the corresponding requirements of part C in the case of clean fuel vehicles 1
(C) except as provided in subsection (c)(3) of section 7541 of this title and the corresponding requirements of part C in the case of clean fuel vehicles, to provide directly or indirectly in any communication to the ultimate purchaser or any subsequent purchaser that the coverage of any warranty under this chapter is conditioned upon use of any part, component, or system manufactured by such manufacturer or any person acting for such manufacturer or under his control, or conditioned upon service performed by any such person, or
(D) to fail or refuse to comply with the terms and conditions of the warranty under section 7541(a) or (b) of this title or the corresponding requirements of part C in the case of clean fuel vehicles with respect to any vehicle; or
(5) for any person to violate section 7553 of this title, 7554 of this title, or part C of this subchapter or any regulations under section 7553 of this title, 7554 of this title, or part C.
No action with respect to any element of design referred to in paragraph (3) (including any adjustment or alteration of such element) shall be treated as a prohibited act under such paragraph (3) if such action is in accordance with section 7549 of this title. Nothing in paragraph (3) shall be construed to require the use of manufacturer parts in maintaining or repairing any motor vehicle or motor vehicle engine. For the purposes of the preceding sentence, the term “manufacturer parts” means, with respect to a motor vehicle engine, parts produced or sold by the manufacturer of the motor vehicle or motor vehicle engine. No action with respect to any device or element of design referred to in paragraph (3) shall be treated as a prohibited act under that paragraph if (i) the action is for the purpose of repair or replacement of the device or element, or is a necessary and temporary procedure to repair or replace any other item and the device or element is replaced upon completion of the procedure, and (ii) such action thereafter results in the proper functioning of the device or element referred to in paragraph (3). No action with respect to any device or element of design referred to in paragraph (3) shall be treated as a prohibited act under that paragraph if the action is for the purpose of a conversion of a motor vehicle for use of a clean alternative fuel (as defined in this subchapter) and if such vehicle complies with the applicable standard under section 7521 of this title when operating on such fuel, and if in the case of a clean alternative fuel vehicle (as defined by rule by the Administrator), the device or element is replaced upon completion of the conversion procedure and such action results in proper functioning of the device or element when the motor vehicle operates on conventional fuel.
(b) Exemptions; refusal to admit vehicle or engine into United States; vehicles or engines intended for export
(1) The Administrator may exempt any new motor vehicle or new motor vehicle engine, from subsection (a), upon such terms and conditions as he may find necessary for the purpose of research, investigations, studies, demonstrations, or training, or for reasons of national security.
(2) A new motor vehicle or new motor vehicle engine offered for importation or imported by any person in violation of subsection (a) shall be refused admission into the United States, but the Secretary of the Treasury and the Administrator may, by joint regulation, provide for deferring final determination as to admission and authorizing the delivery of such a motor vehicle or engine offered for import to the owner or consignee thereof upon such terms and conditions (including the furnishing of a bond) as may appear to them appropriate to insure that any such motor vehicle or engine will be brought into conformity with the standards, requirements, and limitations applicable to it under this part. The Secretary of the Treasury shall, if a motor vehicle or engine is finally refused admission under this paragraph, cause disposition thereof in accordance with the customs laws unless it is exported, under regulations prescribed by such Secretary, within ninety days of the date of notice of such refusal or such additional time as may be permitted pursuant to such regulations, except that disposition in accordance with the customs laws may not be made in such manner as may result, directly or indirectly, in the sale, to the ultimate consumer, of a new motor vehicle or new motor vehicle engine that fails to comply with applicable standards of the Administrator under this part.
(3) A new motor vehicle or new motor vehicle engine intended solely for export, and so labeled or tagged on the outside of the container and on the vehicle or engine itself, shall be subject to the provisions of subsection (a), except that if the country which is to receive such vehicle or engine has emission standards which differ from the standards prescribed under section 7521 of this title, then such vehicle or engine shall comply with the standards of such country which is to receive such vehicle or engine.
(July 14, 1955, ch. 360, title II, § 203, as added Pub. L. 89–272, title I, § 101(8), Oct. 20, 1965, 79 Stat. 993; amended Pub. L. 90–148, § 2, Nov. 21, 1967, 81 Stat. 499; Pub. L. 91–604, §§ 7(a), 11(a)(2)(A), 15(c)(2), Dec. 31, 1970, 84 Stat. 1693, 1705, 1713; Pub. L. 95–95, title II, §§ 206, 211(a), 218(a), (d), 219(a), (b), Aug. 7, 1977, 91 Stat. 755, 757, 761, 762; Pub. L. 95–190, § 14(a)(66)–(68), Nov. 16, 1977, 91 Stat. 1403; Pub. L. 101–549, title II, §§ 228(a), (b), (e), 230(6), Nov. 15, 1990, 104 Stat. 2507, 2511, 2529.)
§ 7523. Actions to restrain violations
(a) Jurisdiction
(b) Actions brought by or in name of United States; subpenas
(July 14, 1955, ch. 360, title II, § 204, as added Pub. L. 89–272, title I, § 101(8), Oct. 20, 1965, 79 Stat. 994; amended Pub. L. 90–148, § 2, Nov. 21, 1967, 81 Stat. 500; Pub. L. 91–604, § 7(b), Dec. 31, 1970, 84 Stat. 1694; Pub. L. 95–95, title II, § 218(b), Aug. 7, 1977, 91 Stat. 761.)
§ 7524. Civil penalties
(a) Violations
(b) Civil actions
(c) Administrative assessment of certain penalties
(1) Administrative penalty authority
(2) Determining amount
(3) Effect of Administrator’s action
(A) Action by the Administrator under this subsection shall not affect or limit the Administrator’s authority to enforce any provision of this chapter; except that any violation,
(i) with respect to which the Administrator has commenced and is diligently prosecuting an action under this subsection, or
(ii) for which the Administrator has issued a final order not subject to further judicial review and the violator has paid a penalty assessment under this subsection,
shall not be the subject of civil penalty action under subsection (b).
(B) No action by the Administrator under this subsection shall affect any person’s obligation to comply with any section of this chapter.
(4) Finality of order
(5) Judicial review
(6) CollectionIf any person fails to pay an assessment of a civil penalty imposed by the Administrator as provided in this subsection—
(A) after the order making the assessment has become final, or
(B) after a court in an action brought under paragraph (5) has entered a final judgment in favor of the Administrator,
the Administrator shall request the Attorney General to bring a civil action in an appropriate district court to recover the amount assessed (plus interest at rates established pursuant to section 6621(a)(2) of title 26 from the date of the final order or the date of the final judgment, as the case may be). In such an action, the validity, amount, and appropriateness of the penalty shall not be subject to review. Any person who fails to pay on a timely basis the amount of an assessment of a civil penalty as described in the first sentence of this paragraph shall be required to pay, in addition to that amount and interest, the United States’ enforcement expenses, including attorneys fees and costs for collection proceedings, and a quarterly nonpayment penalty for each quarter during which such failure to pay persists. The nonpayment penalty shall be in an amount equal to 10 percent of the aggregate amount of that person’s penalties and nonpayment penalties which are unpaid as of the beginning of such quarter.
(July 14, 1955, ch. 360, title I, § 205, as added Pub. L. 89–272, title I, § 101(8), Oct. 20, 1965, 79 Stat. 994; amended Pub. L. 90–148, § 2, Nov. 21, 1967, 81 Stat. 500; Pub. L. 91–604, § 7(c), Dec. 31, 1970, 84 Stat. 1694; Pub. L. 95–95, title II, § 219(c), Aug. 7, 1977, 91 Stat. 762; Pub. L. 101–549, title II, § 228(c), Nov. 15, 1990, 104 Stat. 2508.)
§ 7525. Motor vehicle and motor vehicle engine compliance testing and certification
(a) Testing and issuance of certificate of conformity
(1) The Administrator shall test, or require to be tested in such manner as he deems appropriate, any new motor vehicle or new motor vehicle engine submitted by a manufacturer to determine whether such vehicle or engine conforms with the regulations prescribed under section 7521 of this title. If such vehicle or engine conforms to such regulations, the Administrator shall issue a certificate of conformity upon such terms, and for such period (not in excess of one year), as he may prescribe. In the case of any original equipment manufacturer (as defined by the Administrator in regulations promulgated before November 15, 1990) of vehicles or vehicle engines whose projected sales in the United States for any model year (as determined by the Administrator) will not exceed 300, the Administrator shall not require, for purposes of determining compliance with regulations under section 7521 of this title for the useful life of the vehicle or engine, operation of any vehicle or engine manufactured during such model year for more than 5,000 miles or 160 hours, respectively, unless the Administrator, by regulation, prescribes otherwise. The Administrator shall apply any adjustment factors that the Administrator deems appropriate to assure that each vehicle or engine will comply during its useful life (as determined under section 7521(d) of this title) with the regulations prescribed under section 7521 of this title.
(2) The Administrator shall test any emission control system incorporated in a motor vehicle or motor vehicle engine submitted to him by any person, in order to determine whether such system enables such vehicle or engine to conform to the standards required to be prescribed under section 7521(b) of this title. If the Administrator finds on the basis of such tests that such vehicle or engine conforms to such standards, the Administrator shall issue a verification of compliance with emission standards for such system when incorporated in vehicles of a class of which the tested vehicle is representative. He shall inform manufacturers and the National Academy of Sciences, and make available to the public, the results of such tests. Tests under this paragraph shall be conducted under such terms and conditions (including requirements for preliminary testing by qualified independent laboratories) as the Administrator may prescribe by regulations.
(3)
(A) A certificate of conformity may be issued under this section only if the Administrator determines that the manufacturer (or in the case of a vehicle or engine for import, any person) has established to the satisfaction of the Administrator that any emission control device, system, or element of design installed on, or incorporated in, such vehicle or engine conforms to applicable requirements of section 7521(a)(4) of this title.
(B) The Administrator may conduct such tests and may require the manufacturer (or any such person) to conduct such tests and provide such information as is necessary to carry out subparagraph (A) of this paragraph. Such requirements shall include a requirement for prompt reporting of the emission of any unregulated pollutant from a system, device, or element of design if such pollutant was not emitted, or was emitted in significantly lesser amounts, from the vehicle or engine without use of the system, device, or element of design.
(4)
(A) Not later than 12 months after November 15, 1990, the Administrator shall revise the regulations promulgated under this subsection to add test procedures capable of determining whether model year 1994 and later model year light-duty vehicles and light-duty trucks, when properly maintained and used, will pass the inspection methods and procedures established under section 7541(b) of this title for that model year, under conditions reasonably likely to be encountered in the conduct of inspection and maintenance programs, but which those programs cannot reasonably influence or control. The conditions shall include fuel characteristics, ambient temperature, and short (30 minutes or less) waiting periods before tests are conducted. The Administrator shall not grant a certificate of conformity under this subsection for any 1994 or later model year vehicle or engine that the Administrator concludes cannot pass the test procedures established under this paragraph.
(B) From time to time, the Administrator may revise the regulations promulgated under subparagraph (A), as the Administrator deems appropriate.
(5)
(A) A motor vehicle engine (including all engine emission controls) may be installed in an exempted specially produced motor vehicle if the motor vehicle engine is from a motor vehicle that is covered by a certificate of conformity issued by the Administrator for the model year in which the exempted specially produced motor vehicle is produced, or the motor vehicle engine is covered by an Executive order subject to regulations promulgated by the California Air Resources Board for the model year in which the exempted specially produced motor vehicle is produced, and—
(i) the manufacturer of the engine supplies written instructions to the Administrator and the manufacturer of the exempted specially produced motor vehicle explaining how to install the engine and maintain functionality of the engine’s emission control system and the on-board diagnostic system (commonly known as “OBD”), except with respect to evaporative emissions;
(ii) the manufacturer of the exempted specially produced motor vehicle installs the engine in accordance with such instructions and certifies such installation in accordance with subparagraph (E);
(iii) the installation instructions include emission control warranty information from the engine manufacturer in compliance with section 7541 of this title, including where warranty repairs can be made, emission control labels to be affixed to the vehicle, and the certificate of conformity number for the applicable vehicle in which the engine was originally intended or the applicable Executive order number for the engine; and
(iv) the manufacturer of the exempted specially produced motor vehicle does not produce more than 325 such vehicles in the calendar year in which the vehicle is produced.
(B) A motor vehicle containing an engine compliant with the requirements of subparagraph (A) shall be treated as meeting the requirements of section 7521 of this title applicable to new vehicles produced or imported in the model year in which the exempted specially produced motor vehicle is produced or imported.
(C) Engine installations that are not performed in accordance with installation instructions provided by the manufacturer and alterations to the engine not in accordance with the installation instructions shall—
(i) be treated as prohibited acts by the installer under section 7522 of this title and any applicable regulations; and
(ii) subject to civil penalties under section 7524(a) of this title, civil actions under section 7524(b) of this title, and administrative assessment of penalties under section 7524(c) of this title.
(D) The manufacturer of an exempted specially produced motor vehicle that has an engine compliant with the requirements of subparagraph (A) shall provide to the purchaser of such vehicle all information received by the manufacturer from the engine manufacturer, including information regarding emissions warranties from the engine manufacturer and all emissions-related recalls by the engine manufacturer.
(E) To qualify to install an engine under this paragraph, and sell, offer for sale, introduce into commerce, deliver for introduction into commerce or import an exempted specially produced motor vehicle, a manufacturer of exempted specially produced motor vehicles shall register with the Administrator at such time and in such manner as the Administrator determines appropriate. The manufacturer shall submit an annual report to the Administrator that includes—
(i) a description of the exempted specially produced motor vehicles and engines installed in such vehicles;
(ii) the certificate of conformity number issued to the motor vehicle in which the engine was originally intended or the applicable Executive order number for the engine; and
(iii) a certification that it produced all exempted specially produced motor vehicles according to the written instructions from the engine manufacturer, and otherwise that the engine conforms in all material respects to the description in the application for the applicable certificate of conformity or Executive order.
(F) Exempted specially produced motor vehicles compliant with this paragraph shall be exempted from—
(i) motor vehicle certification testing under this section; and
(ii) vehicle emission control inspection and maintenance programs required under section 7410 of this title.
(G)
(i) Except as provided in subparagraphs (A) through (F), a person engaged in the manufacturing or assembling of exempted specially produced motor vehicles shall be considered a manufacturer for purposes of this chapter.
(ii) Nothing in this paragraph shall be construed to exempt any person from the prohibitions in section 7522(a)(3) of this title or the requirements in sections 7542, 7525(c), or 7521(m)(5) of this title.
(H) In this paragraph:
(i) The term “exempted specially produced motor vehicle” means a light-duty vehicle or light-duty truck produced by a low-volume manufacturer and that—(I) is intended to resemble the body of another motor vehicle that was manufactured not less than 25 years before the manufacture of the exempted specially produced motor vehicle; and(II) is manufactured under a license for the product configuration, trade dress, trademark, or patent, for the motor vehicle that is intended to be replicated from the original manufacturer, its successors or assignees, or current owner of such product configuration, trade dress, trademark, or patent rights.
(ii) The term “low-volume manufacturer” means a motor vehicle manufacturer, other than a person who is registered as an importer under section 30141 of title 49, whose annual worldwide production, including by a parent or subsidiary of the manufacturer, if applicable, is not more than 5,000 motor vehicles.
(b) Testing procedures; hearing; judicial review; additional evidence
(1) In order to determine whether new motor vehicles or new motor vehicle engines being manufactured by a manufacturer do in fact conform with the regulations with respect to which the certificate of conformity was issued, the Administrator is authorized to test such vehicles or engines. Such tests may be conducted by the Administrator directly or, in accordance with conditions specified by the Administrator, by the manufacturer.
(2)
(A)
(i) If, based on tests conducted under paragraph (1) on a sample of new vehicles or engines covered by a certificate of conformity, the Administrator determines that all or part of the vehicles or engines so covered do not conform with the regulations with respect to which the certificate of conformity was issued and with the requirements of section 7521(a)(4) of this title, he may suspend or revoke such certificate in whole or in part, and shall so notify the manufacturer. Such suspension or revocation shall apply in the case of any new motor vehicles or new motor vehicle engines manufactured after the date of such notification (or manufactured before such date if still in the hands of the manufacturer), and shall apply until such time as the Administrator finds that vehicles and engines manufactured by the manufacturer do conform to such regulations and requirements. If, during any period of suspension or revocation, the Administrator finds that a vehicle or engine actually conforms to such regulations and requirements, he shall issue a certificate of conformity applicable to such vehicle or engine.
(ii) If, based on tests conducted under paragraph (1) on any new vehicle or engine, the Administrator determines that such vehicle or engine does not conform with such regulations and requirements, he may suspend or revoke such certificate insofar as it applies to such vehicle or engine until such time as he finds such vehicle or engine actually so conforms with such regulations and requirements, and he shall so notify the manufacturer.
(B)
(i) At the request of any manufacturer the Administrator shall grant such manufacturer a hearing as to whether the tests have been properly conducted or any sampling methods have been properly applied, and make a determination on the record with respect to any suspension or revocation under subparagraph (A); but suspension or revocation under subparagraph (A) shall not be stayed by reason of such hearing.
(ii) In any case of actual controversy as to the validity of any determination under clause (i), the manufacturer may at any time prior to the 60th day after such determination is made file a petition with the United States court of appeals for the circuit wherein such manufacturer resides or has his principal place of business for a judicial review of such determination. A copy of the petition shall be forthwith transmitted by the clerk of the court to the Administrator or other officer designated by him for that purpose. The Administrator thereupon shall file in the court the record of the proceedings on which the Administrator based his determination, as provided in section 2112 of title 28.
(iii) If the petitioner applies to the court for leave to adduce additional evidence, and shows to the satisfaction of the court that such additional evidence is material and that there were reasonable grounds for the failure to adduce such evidence in the proceeding before the Administrator, the court may order such additional evidence (and evidence in rebuttal thereof) to be taken before the Administrator, in such manner and upon such terms and conditions as the court may deem proper. The Administrator may modify his findings as to the facts, or make new findings, by reason of the additional evidence so taken and he shall file such modified or new findings, and his recommendation, if any, for the modification or setting aside of his original determination, with the return of such additional evidence.
(iv) Upon the filing of the petition referred to in clause (ii), the court shall have jurisdiction to review the order in accordance with chapter 7 of title 5 and to grant appropriate relief as provided in such chapter.
(c) Inspection
(d) Rules and regulations
(e) Publication of test results
(f) High altitude regulations
(g) Nonconformance penalty
(1) In the case of any class or category of heavy-duty vehicles or engines to which a standard promulgated under section 7521(a) of this title applies, except as provided in paragraph (2), a certificate of conformity shall be issued under subsection (a) and shall not be suspended or revoked under subsection (b) for such vehicles or engines manufactured by a manufacturer notwithstanding the failure of such vehicles or engines to meet such standard if such manufacturer pays a nonconformance penalty as provided under regulations promulgated by the Administrator after notice and opportunity for public hearing. In the case of motorcycles to which such a standard applies, such a certificate may be issued notwithstanding such failure if the manufacturer pays such a penalty.
(2) No certificate of conformity may be issued under paragraph (1) with respect to any class or category of vehicle or engine if the degree by which the manufacturer fails to meet any standard promulgated under section 7521(a) of this title with respect to such class or category exceeds the percentage determined under regulations promulgated by the Administrator to be practicable. Such regulations shall require such testing of vehicles or engines being produced as may be necessary to determine the percentage of the classes or categories of vehicles or engines which are not in compliance with the regulations with respect to which a certificate of conformity was issued and shall be promulgated not later than one year after August 7, 1977.
(3) The regulations promulgated under paragraph (1) shall, not later than one year after August 7, 1977, provide for nonconformance penalties in amounts determined under a formula established by the Administrator. Such penalties under such formula—
(A) may vary from pollutant-to-pollutant;
(B) may vary by class or category or vehicle or engine;
(C) shall take into account the extent to which actual emissions of any air pollutant exceed allowable emissions under the standards promulgated under section 7521 of this title;
(D) shall be increased periodically in order to create incentives for the development of production vehicles or engines which achieve the required degree of emission reduction; and
(E) shall remove any competitive disadvantage to manufacturers whose engines or vehicles achieve the required degree of emission reduction (including any such disadvantage arising from the application of paragraph (4)).
(4) In any case in which a certificate of conformity has been issued under this subsection, any warranty required under section 7541(b)(2) of this title and any action under section 7541(c) of this title shall be required to be effective only for the emission levels which the Administrator determines that such certificate was issued and not for the emission levels required under the applicable standard.
(5) The authorities of section 7542(a) of this title shall apply, subject to the conditions of section 7542(b) 2
2 See References in Text note below.
of this title, for purposes of this subsection.(h) Review and revision of regulations
(July 14, 1955, ch. 360, title II, § 206, as added Pub. L. 91–604, § 8(a), Dec. 31, 1970, 84 Stat. 1694; amended Pub. L. 95–95, title II, §§ 213(a), 214(b), (c), 220, 224(e), Aug. 7, 1977, 91 Stat. 758–760, 762, 768; Pub. L. 95–190, § 14(a)(69), Nov. 16, 1977, 91 Stat. 1403; Pub. L. 101–549, title II, §§ 208, 230(7), (8), Nov. 15, 1990, 104 Stat. 2483, 2529; Pub. L. 114–94, div. B, title XXIV, § 24405(b), Dec. 4, 2015, 129 Stat. 1723.)
§ 7541. Compliance by vehicles and engines in actual use
(a) Warranty; certification; payment of replacement costs of parts, devices, or components designed for emission control
(1) Effective with respect to vehicles and engines manufactured in model years beginning more than 60 days after December 31, 1970, the manufacturer of each new motor vehicle and new motor vehicle engine shall warrant to the ultimate purchaser and each subsequent purchaser that such vehicle or engine is (A) designed, built, and equipped so as to conform at the time of sale with applicable regulations under section 7521 of this title, and (B) free from defects in materials and workmanship which cause such vehicle or engine to fail to conform with applicable regulations for its useful life (as determined under section 7521(d) of this title). In the case of vehicles and engines manufactured in the model year 1995 and thereafter such warranty shall require that the vehicle or engine is free from any such defects for the warranty period provided under subsection (i).
(2) In the case of a motor vehicle part or motor vehicle engine part, the manufacturer or rebuilder of such part may certify that use of such part will not result in a failure of the vehicle or engine to comply with emission standards promulgated under section 7521 of this title. Such certification shall be made only under such regulations as may be promulgated by the Administrator to carry out the purposes of subsection (b). The Administrator shall promulgate such regulations no later than two years following August 7, 1977.
(3) The cost of any part, device, or component of any light-duty vehicle that is designed for emission control and which in the instructions issued pursuant to subsection (c)(3) of this section is scheduled for replacement during the useful life of the vehicle in order to maintain compliance with regulations under section 7521 of this title, the failure of which shall not interfere with the normal performance of the vehicle, and the expected retail price of which, including installation costs, is greater than 2 percent of the suggested retail price of such vehicle, shall be borne or reimbursed at the time of replacement by the vehicle manufacturer and such replacement shall be provided without cost to the ultimate purchaser, subsequent purchaser, or dealer. The term “designed for emission control” as used in the preceding sentence means a catalytic converter, thermal reactor, or other component installed on or in a vehicle for the sole or primary purpose of reducing vehicle emissions (not including those vehicle components which were in general use prior to model year 1968 and the primary function of which is not related to emission control).
(b) Testing methods and proceduresIf the Administrator determines that (i) there are available testing methods and procedures to ascertain whether, when in actual use throughout its 1
1 So in original. The word “its” probably should not appear.
the warranty period (as determined under subsection (i)), each vehicle and engine to which regulations under section 7521 of this title apply complies with the emission standards of such regulations, (ii) such methods and procedures are in accordance with good engineering practices, and (iii) such methods and procedures are reasonably capable of being correlated with tests conducted under section 7525(a)(1) of this title, then—(1) he shall establish such methods and procedures by regulation, and
(2) at such time as he determines that inspection facilities or equipment are available for purposes of carrying out testing methods and procedures established under paragraph (1), he shall prescribe regulations which shall require manufacturers to warrant the emission control device or system of each new motor vehicle or new motor vehicle engine to which a regulation under section 7521 of this title applies and which is manufactured in a model year beginning after the Administrator first prescribes warranty regulations under this paragraph (2). The warranty under such regulations shall run to the ultimate purchaser and each subsequent purchaser and shall provide that if—
(A) the vehicle or engine is maintained and operated in accordance with instructions under subsection (c)(3),
(B) it fails to conform at any time during its 1 the warranty period (as determined under subsection (i)) to the regulations prescribed under section 7521 of this title, and
(C) such nonconformity results in the ultimate purchaser (or any subsequent purchaser) of such vehicle or engine having to bear any penalty or other sanction (including the denial of the right to use such vehicle or engine) under State or Federal law,
then such manufacturer shall remedy such nonconformity under such warranty with the cost thereof to be borne by the manufacturer. No such warranty shall be invalid on the basis of any part used in the maintenance or repair of a vehicle or engine if such part was certified as provided under subsection (a)(2).
(c) Nonconforming vehicles; plan for remedying nonconformity; instructions for maintenance and use; label or tagEffective with respect to vehicles and engines manufactured during model years beginning more than 60 days after December 31, 1970—
(1) If the Administrator determines that a substantial number of any class or category of vehicles or engines, although properly maintained and used, do not conform to the regulations prescribed under section 7521 of this title, when in actual use throughout their useful life (as determined under section 7521(d) of this title), he shall immediately notify the manufacturer thereof of such nonconformity, and he shall require the manufacturer to submit a plan for remedying the nonconformity of the vehicles or engines with respect to which such notification is given. The plan shall provide that the nonconformity of any such vehicles or engines which are properly used and maintained will be remedied at the expense of the manufacturer. If the manufacturer disagrees with such determination of nonconformity and so advises the Administrator, the Administrator shall afford the manufacturer and other interested persons an opportunity to present their views and evidence in support thereof at a public hearing. Unless, as a result of such hearing the Administrator withdraws such determination of nonconformity, he shall, within 60 days after the completion of such hearing, order the manufacturer to provide prompt notification of such nonconformity in accordance with paragraph (2).
(2) Any notification required by paragraph (1) with respect to any class or category of vehicles or engines shall be given to dealers, ultimate purchasers, and subsequent purchasers (if known) in such manner and containing such information as the Administrator may by regulations require.
(3)
(A) The manufacturer shall furnish with each new motor vehicle or motor vehicle engine written instructions for the proper maintenance and use of the vehicle or engine by the ultimate purchaser and such instructions shall correspond to regulations which the Administrator shall promulgate. The manufacturer shall provide in boldface type on the first page of the written maintenance instructions notice that maintenance, replacement, or repair of the emission control devices and systems may be performed by any automotive repair establishment or individual using any automotive part which has been certified as provided in subsection (a)(2).
(B) The instruction under subparagraph (A) of this paragraph shall not include any condition on the ultimate purchaser’s using, in connection with such vehicle or engine, any component or service (other than a component or service provided without charge under the terms of the purchase agreement) which is identified by brand, trade, or corporate name; or directly or indirectly distinguishing between service performed by the franchised dealers of such manufacturer or any other service establishments with which such manufacturer has a commercial relationship, and service performed by independent automotive repair facilities with which such manufacturer has no commercial relationship; except that the prohibition of this subsection may be waived by the Administrator if—
(i) the manufacturer satisfies the Administrator that the vehicle or engine will function properly only if the component or service so identified is used in connection with such vehicle or engine, and
(ii) the Administrator finds that such a waiver is in the public interest.
(C) In addition, the manufacturer shall indicate by means of a label or tag permanently affixed to such vehicle or engine that such vehicle or engine is covered by a certificate of conformity issued for the purpose of assuring achievement of emissions standards prescribed under section 7521 of this title. Such label or tag shall contain such other information relating to control of motor vehicle emissions as the Administrator shall prescribe by regulation.
(4)Intermediate in-use standards.—
(A)Model years 1994 and 1995.—For light-duty trucks of up to 6,000 lbs. gross vehicle weight rating (GVWR) and light-duty vehicles which are subject to standards under table G of section 7521(g)(1) of this title in model years 1994 and 1995 (40 percent of the manufacturer’s sales volume in model year 1994 and 80 percent in model year 1995), the standards applicable to NMHC, CO, and NO
(B)Model years 1996 and thereafter.—
(i) In the model years 1996 and 1997, light-duty trucks (LDTs) up to 6,000 lbs. gross vehicle weight rating (GVWR) and light-duty vehicles which are not subject to final in-use standards under paragraph (5) (60 percent of the manufacturer’s sales volume in model year 1996 and 20 percent in model year 1997) shall be subject to the standards set forth in table A of subparagraph (A) for NMHC, CO, and NOx for purposes of this subsection in lieu of those set forth in paragraph (5).
(ii) For LDTs of more than 6,000 lbs. GVWR—(I) in model year 1996 which are subject to the standards set forth in Table H of section 7521(h) of this title (50%);(II) in model year 1997 (100%); and(III) in model year 1998 which are not subject to final in-use standards under paragraph (5) (50%);
the standards for NMHC, CO, and NOx for purposes of this subsection shall be those set forth in Table B below in lieu of the standards for such air pollutants otherwise applicable under this subchapter.
Table B—Intermediate In-Use Standards LDTs More Than 6,000 Lbs. GVWR | Vehicle type | NMHC | CO | NOx | LDTs (3,751–5,750 lbs. TW) | 0.40 | 5.5 | 0.88* | LDTs (over 5,750 lbs. TW) | 0.49 | 6.2 | 1.38* |
|---|
(C)Useful life.—In the case of the in-use standards applicable under this paragraph, for purposes of applying this subsection, the applicable useful life shall be 5 years or 50,000 miles or the equivalent (whichever first occurs).
(5)Final in-use standards.—
(A) After the model year 1995, for purposes of applying this subsection, in the case of the percentage specified in the implementation schedule below of each manufacturer’s sales volume of light-duty trucks of up to 6,000 lbs. gross vehicle weight rating (GVWR) and light duty 2
2 So in original. Probably should be “light-duty”.
vehicles, the standards for NMHC, CO, and NOx shall be as provided in Table G in section 7521(g) of this title, except that in applying the standards set forth in Table G for purposes of determining compliance with this subsection, the applicable useful life shall be (i) 5 years or 50,000 miles (or the equivalent) whichever first occurs in the case of standards applicable for purposes of certification at 50,000 miles; and (ii) 10 years or 100,000 miles (or the equivalent), whichever first occurs in the case of standards applicable for purposes of certification at 100,000 miles, except that no testing shall be done beyond 7 years or 75,000 miles, or the equivalent whichever first occurs.LDTs up to 6,000 Lbs. GVWR and Light-Duty Vehicle Schedule for Implementation of Final In-Use Standards | Model year | Percent | 1996 | 40 | 1997 | 80 | 1998 | 100 |
|---|
(B) After the model year 1997, for purposes of applying this subsection, in the case of the percentage specified in the implementation schedule below of each manufacturer’s sales volume of light-duty trucks of more than 6,000 lbs. gross vehicle weight rating (GVWR), the standards for NMHC, CO, and NOx shall be as provided in Table H in section 7521(h) of this title, except that in applying the standards set forth in Table H for purposes of determining compliance with this subsection, the applicable useful life shall be (i) 5 years or 50,000 miles (or the equivalent) whichever first occurs in the case of standards applicable for purposes of certification at 50,000 miles; and (ii) 11 years or 120,000 miles (or the equivalent), whichever first occurs in the case of standards applicable for purposes of certification at 120,000 miles, except that no testing shall be done beyond 7 years or 90,000 miles (or the equivalent) whichever first occurs.
LDTs of More Than 6,000 Lbs. GVWR Implementation Schedule for Implementation of Final In-Use Standards | Model year | Percent | 1998 | 50 | 1999 | 100 |
|---|
(6)Diesel vehicles; in-use useful life and testing.—
(A) In the case of diesel-fueled light-duty trucks up to 6,000 lbs. GVWR and light-duty vehicles, the useful life for purposes of determining in-use compliance with the standards under section 7521(g) of this title for NOx shall be a period of 10 years or 100,000 miles (or the equivalent), whichever first occurs, in the case of standards applicable for purposes of certification at 100,000 miles, except that testing shall not be done for a period beyond 7 years or 75,000 miles (or the equivalent) whichever first occurs.
(B) In the case of diesel-fueled light-duty trucks of 6,000 lbs. GVWR or more, the useful life for purposes of determining in-use compliance with the standards under section 7521(h) of this title for NOx shall be a period of 11 years or 120,000 miles (or the equivalent), whichever first occurs, in the case of standards applicable for purposes of certification at 120,000 miles, except that testing shall not be done for a period beyond 7 years or 90,000 miles (or the equivalent) whichever first occurs.
(d) Dealer costs borne by manufacturer
(e) Cost statement
(f) Inspection after sale to ultimate purchaser
(g) Replacement and maintenance costs borne by owner
(h) Dealer certification
(1) If at any time during the period for which the warranty applies under subsection (b), a motor vehicle fails to conform to the applicable regulations under section 7521 of this title as determined under subsection (b) of this section such nonconformity shall be remedied by the manufacturer at the cost of the manufacturer pursuant to such warranty as provided in subsection (b)(2)(without regard to subparagraph (C) thereof).
(2) Nothing in section 7543(a) of this title shall be construed to prohibit a State from testing, or requiring testing of, a motor vehicle after the date of sale of such vehicle to the ultimate purchaser (except that no new motor vehicle manufacturer or dealer may be required to conduct testing under this paragraph).
(i) Warranty period
(1) In general
(2) Specified major emission control componentsIn the case of a specified major emission control component, the warranty period for new light-duty trucks and new light-duty vehicles and engines manufactured in the model year 1995 and thereafter for purposes of subsection (a)(1) and subsection (b) shall be 8 years or 80,000 miles of use (whichever first occurs). As used in this paragraph, the term “specified major emission control component” means only a catalytic converter, an electronic emissions control unit, and an onboard emissions diagnostic device, except that the Administrator may designate any other pollution control device or component as a specified major emission control component if—
(A) the device or component was not in general use on vehicles and engines manufactured prior to the model year 1990; and
(B) the Administrator determines that the retail cost (exclusive of installation costs) of such device or component exceeds $200 (in 1989 dollars), adjusted for inflation or deflation as calculated by the Administrator at the time of such determination.
For purposes of this paragraph, the term “onboard emissions diagnostic device” means any device installed for the purpose of storing or processing emissions related diagnostic information, but not including any parts or other systems which it monitors except specified major emissions control components. Nothing in this chapter shall be construed to provide that any part (other than a part referred to in the preceding sentence) shall be required to be warranted under this chapter for the period of 8 years or 80,000 miles referred to in this paragraph.
(3) Instructions
(July 14, 1955, ch. 360, title II, § 207, as added Pub. L. 91–604, § 8(a), Dec. 31, 1970, 84 Stat. 1696; amended Pub. L. 95–95, title II, §§ 205, 208–210, 212, Aug. 7, 1977, 91 Stat. 754–756, 758; Pub. L. 95–190, § 14(a)(70)–(72), Nov. 16, 1977, 91 Stat. 1403; Pub. L. 101–549, title II, §§ 209, 210, 230(9), Nov. 15, 1990, 104 Stat. 2484, 2485, 2529; Pub. L. 113–109, § 1, June 9, 2014, 128 Stat. 1170.)
§ 7542. Information collection
(a) Manufacturer’s responsibility
(b) Enforcement authority
For the purposes of enforcement of this section, officers or employees duly designated by the Administrator upon presenting appropriate credentials are authorized—
(1) to enter, at reasonable times, any establishment of the manufacturer, or of any person whom the manufacturer engages to perform any activity required by subsection (a), for the purposes of inspecting or observing any activity conducted pursuant to subsection (a), and
(2) to inspect records, files, papers, processes, controls, and facilities used in performing any activity required by subsection (a), by such manufacturer or by any person whom the manufacturer engages to perform any such activity.
(c) Availability to public; trade secrets
(July 14, 1955, ch. 360, title II, § 208, formerly § 207, as added Pub. L. 89–272, title I, § 101(8), Oct. 20, 1965, 79 Stat. 994; amended Pub. L. 90–148, § 2, Nov. 21, 1967, 81 Stat. 501; renumbered and amended Pub. L. 91–604, §§ 8(a), 10(a), 11(a)(2)(A), 15(c)(2), Dec. 31, 1970, 84 Stat. 1694, 1700, 1705, 1713; Pub. L. 101–549, title II, § 211, Nov. 15, 1990, 104 Stat. 2487.)
§ 7543. State standards
(a) Prohibition
(b) Waiver
(1) The Administrator shall, after notice and opportunity for public hearing, waive application of this section to any State which has adopted standards (other than crankcase emission standards) for the control of emissions from new motor vehicles or new motor vehicle engines prior to March 30, 1966, if the State determines that the State standards will be, in the aggregate, at least as protective of public health and welfare as applicable Federal standards. No such waiver shall be granted if the Administrator finds that—
(A) the determination of the State is arbitrary and capricious,
(B) such State does not need such State standards to meet compelling and extraordinary conditions, or
(C) such State standards and accompanying enforcement procedures are not consistent with section 7521(a) of this title.
(2) If each State standard is at least as stringent as the comparable applicable Federal standard, such State standard shall be deemed to be at least as protective of health and welfare as such Federal standards for purposes of paragraph (1).
(3) In the case of any new motor vehicle or new motor vehicle engine to which State standards apply pursuant to a waiver granted under paragraph (1), compliance with such State standards shall be treated as compliance with applicable Federal standards for purposes of this subchapter.
(c) Certification of vehicle parts or engine parts
(d) Control, regulation, or restrictions on registered or licensed motor vehicles
(e) Nonroad engines or vehicles
(1) Prohibition on certain State standardsNo State or any political subdivision thereof shall adopt or attempt to enforce any standard or other requirement relating to the control of emissions from either of the following new nonroad engines or nonroad vehicles subject to regulation under this chapter—
(A) New engines which are used in construction equipment or vehicles or used in farm equipment or vehicles and which are smaller than 175 horsepower.
(B) New locomotives or new engines used in locomotives.
Subsection (b) shall not apply for purposes of this paragraph.
(2) Other nonroad engines or vehicles
(A) In the case of any nonroad vehicles or engines other than those referred to in subparagraph (A) or (B) of paragraph (1), the Administrator shall, after notice and opportunity for public hearing, authorize California to adopt and enforce standards and other requirements relating to the control of emissions from such vehicles or engines if California determines that California standards will be, in the aggregate, at least as protective of public health and welfare as applicable Federal standards. No such authorization shall be granted if the Administrator finds that—
(i) the determination of California is arbitrary and capricious,
(ii) California does not need such California standards to meet compelling and extraordinary conditions, or
(iii) California standards and accompanying enforcement procedures are not consistent with this section.
(B) Any State other than California which has plan provisions approved under part D of subchapter I may adopt and enforce, after notice to the Administrator, for any period, standards relating to control of emissions from nonroad vehicles or engines (other than those referred to in subparagraph (A) or (B) of paragraph (1)) and take such other actions as are referred to in subparagraph (A) of this paragraph respecting such vehicles or engines if—
(i) such standards and implementation and enforcement are identical, for the period concerned, to the California standards authorized by the Administrator under subparagraph (A), and
(ii) California and such State adopt such standards at least 2 years before commencement of the period for which the standards take effect.
The Administrator shall issue regulations to implement this subsection.
(July 14, 1955, ch. 360, title II, § 209, formerly § 208, as added Pub. L. 90–148, § 2, Nov. 21, 1967, 81 Stat. 501; renumbered and amended Pub. L. 91–604, §§ 8(a), 11(a)(2)(A), 15(c)(2), Dec. 31, 1970, 84 Stat. 1694, 1705, 1713; Pub. L. 95–95, title II, §§ 207, 221, Aug. 7, 1977, 91 Stat. 755, 762; Pub. L. 101–549, title II, § 222(b), Nov. 15, 1990, 104 Stat. 2502.)
§ 7544. State grants
The Administrator is authorized to make grants to appropriate State agencies in an amount up to two-thirds of the cost of developing and maintaining effective vehicle emission devices and systems inspection and emission testing and control programs, except that—
(1) no such grant shall be made for any part of any State vehicle inspection program which does not directly relate to the cost of the air pollution control aspects of such a program;
(2) no such grant shall be made unless the Secretary of Transportation has certified to the Administrator that such program is consistent with any highway safety program developed pursuant to section 402 of title 23; and
(3) no such grant shall be made unless the program includes provisions designed to insure that emission control devices and systems on vehicles in actual use have not been discontinued or rendered inoperative.
Grants may be made under this section by way of reimbursement in any case in which amounts have been expended by the State before the date on which any such grant was made.
(July 14, 1955, ch. 360, title II, § 210, formerly § 209, as added Pub. L. 90–148, § 2, Nov. 21, 1967, 81 Stat. 502; renumbered and amended Pub. L. 91–604, §§ 8(a), 10(b), Dec. 31, 1970, 84 Stat. 1694, 1700; Pub. L. 95–95, title II, § 204, Aug. 7, 1977, 91 Stat. 754.)
§ 7545. Regulation of fuels
(a) Authority of Administrator to regulate
(b) Registration requirement
(1) For the purpose of registration of fuels and fuel additives, the Administrator shall require—
(A) the manufacturer of any fuel to notify him as to the commercial identifying name and manufacturer of any additive contained in such fuel; the range of concentration of any additive in the fuel; and the purpose-in-use of any such additive; and
(B) the manufacturer of any additive to notify him as to the chemical composition of such additive.
(2) For the purpose of registration of fuels and fuel additives, the Administrator shall, on a regular basis, require the manufacturer of any fuel or fuel additive—
(A) to conduct tests to determine potential public health and environmental effects of the fuel or additive (including carcinogenic, teratogenic, or mutagenic effects); and
(B) to furnish the description of any analytical technique that can be used to detect and measure any additive in such fuel, the recommended range of concentration of such additive, and the recommended purpose-in-use of such additive, and such other information as is reasonable and necessary to determine the emissions resulting from the use of the fuel or additive contained in such fuel, the effect of such fuel or additive on the emission control performance of any vehicle, vehicle engine, nonroad engine or nonroad vehicle, or the extent to which such emissions affect the public health or welfare.
Tests under subparagraph (A) shall be conducted in conformity with test procedures and protocols established by the Administrator. The result of such tests shall not be considered confidential.
(3) Upon compliance with the provision of this subsection, including assurances that the Administrator will receive changes in the information required, the Administrator shall register such fuel or fuel additive.
(4)Study on certain fuel additives and blendstocks.—
(A)In general.—Not later than 2 years after August 8, 2005, the Administrator shall—
(i) conduct a study on the effects on public health (including the effects on children, pregnant women, minority or low-income communities, and other sensitive populations), air quality, and water resources of increased use of, and the feasibility of using as substitutes for methyl tertiary butyl ether in gasoline—(I) ethyl tertiary butyl ether;(II) tertiary amyl methyl ether;(III) di-isopropyl ether;(IV) tertiary butyl alcohol;(V) other ethers and heavy alcohols, as determined by then 1
1 So in original. Probably should be “the”.
Administrator;(VI) ethanol;(VII) iso-octane; and(VIII) alkylates; and(ii) conduct a study on the effects on public health (including the effects on children, pregnant women, minority or low-income communities, and other sensitive populations), air quality, and water resources of the adjustment for ethanol-blended reformulated gasoline to the volatile organic compounds performance requirements that are applicable under paragraphs (1) and (3) of subsection (k); and
(iii) submit to the Committee on Environment and Public Works of the Senate and the Committee on Energy and Commerce of the House of Representatives a report describing the results of the studies under clauses (i) and (ii).
(B)Contracts for study.—In carrying out this paragraph, the Administrator may enter into one or more contracts with nongovernmental entities such as—
(i) the national energy laboratories; and
(ii) institutions of higher education (as defined in section 1001 of title 20).
(c) Offending fuels and fuel additives; control; prohibition
(1) The Administrator may, from time to time on the basis of information obtained under subsection (b) of this section or other information available to him, by regulation, control or prohibit the manufacture, introduction into commerce, offering for sale, or sale of any fuel or fuel additive for use in a motor vehicle, motor vehicle engine, or nonroad engine or nonroad vehicle if, in the judgment of the Administrator, any fuel or fuel additive or any emission product of such fuel or fuel additive causes, or contributes, to air pollution or water pollution (including any degradation in the quality of groundwater) that may reasonably be anticipated to endanger the public health or welfare, or (B) 2
2 So in original. Par. (1) does not contain a cl. (A).
if emission products of such fuel or fuel additive will impair to a significant degree the performance of any emission control device or system which is in general use, or which the Administrator finds has been developed to a point where in a reasonable time it would be in general use were such regulation to be promulgated.(2)
(A) No fuel, class of fuels, or fuel additive may be controlled or prohibited by the Administrator pursuant to clause (A) of paragraph (1) except after consideration of all relevant medical and scientific evidence available to him, including consideration of other technologically or economically feasible means of achieving emission standards under section 7521 of this title.
(B) No fuel or fuel additive may be controlled or prohibited by the Administrator pursuant to clause (B) of paragraph (1) except after consideration of available scientific and economic data, including a cost benefit analysis comparing emission control devices or systems which are or will be in general use and require the proposed control or prohibition with emission control devices or systems which are or will be in general use and do not require the proposed control or prohibition. On request of a manufacturer of motor vehicles, motor vehicle engines, fuels, or fuel additives submitted within 10 days of notice of proposed rulemaking, the Administrator shall hold a public hearing and publish findings with respect to any matter he is required to consider under this subparagraph. Such findings shall be published at the time of promulgation of final regulations.
(C) No fuel or fuel additive may be prohibited by the Administrator under paragraph (1) unless he finds, and publishes such finding, that in his judgment such prohibition will not cause the use of any other fuel or fuel additive which will produce emissions which will endanger the public health or welfare to the same or greater degree than the use of the fuel or fuel additive proposed to be prohibited.
(3)
(A) For the purpose of obtaining evidence and data to carry out paragraph (2), the Administrator may require the manufacturer of any motor vehicle or motor vehicle engine to furnish any information which has been developed concerning the emissions from motor vehicles resulting from the use of any fuel or fuel additive, or the effect of such use on the performance of any emission control device or system.
(B) In obtaining information under subparagraph (A), section 7607(a) of this title (relating to subpenas) shall be applicable.
(4)
(A) Except as otherwise provided in subparagraph (B) or (C), no State (or political subdivision thereof) may prescribe or attempt to enforce, for purposes of motor vehicle emission control, any control or prohibition respecting any characteristic or component of a fuel or fuel additive in a motor vehicle or motor vehicle engine—
(i) if the Administrator has found that no control or prohibition of the characteristic or component of a fuel or fuel additive under paragraph (1) is necessary and has published his finding in the Federal Register, or
(ii) if the Administrator has prescribed under paragraph (1) a control or prohibition applicable to such characteristic or component of a fuel or fuel additive, unless State prohibition or control is identical to the prohibition or control prescribed by the Administrator.
(B) Any State for which application of section 7543(a) of this title has at any time been waived under section 7543(b) of this title may at any time prescribe and enforce, for the purpose of motor vehicle emission control, a control or prohibition respecting any fuel or fuel additive.
(C)
(i) A State may prescribe and enforce, for purposes of motor vehicle emission control, a control or prohibition respecting the use of a fuel or fuel additive in a motor vehicle or motor vehicle engine if an applicable implementation plan for such State under section 7410 of this title so provides. The Administrator may approve such provision in an implementation plan, or promulgate an implementation plan containing such a provision, only if he finds that the State control or prohibition is necessary to achieve the national primary or secondary ambient air quality standard which the plan implements. The Administrator may find that a State control or prohibition is necessary to achieve that standard if no other measures that would bring about timely attainment exist, or if other measures exist and are technically possible to implement, but are unreasonable or impracticable. The Administrator may make a finding of necessity under this subparagraph even if the plan for the area does not contain an approved demonstration of timely attainment.
(ii) The Administrator may temporarily waive a control or prohibition respecting the use of a fuel or fuel additive required or regulated by the Administrator pursuant to subsection (c), (h), (i), (k), or (m) of this section or prescribed in an applicable implementation plan under section 7410 of this title approved by the Administrator under clause (i) of this subparagraph if, after consultation with, and concurrence by, the Secretary of Energy, the Administrator determines that—(I) extreme and unusual fuel or fuel additive supply circumstances exist in a State or region of the Nation which prevent the distribution of an adequate supply of the fuel or fuel additive to consumers;(II) such extreme and unusual fuel and fuel additive supply circumstances are the result of a natural disaster, an Act of God, a pipeline or refinery equipment failure, or another event that could not reasonably have been foreseen or prevented and not the lack of prudent planning on the part of the suppliers of the fuel or fuel additive to such State or region; and(III) it is in the public interest to grant the waiver (for example, when a waiver is necessary to meet projected temporary shortfalls in the supply of the fuel or fuel additive in a State or region of the Nation which cannot otherwise be compensated for).
(iii) If the Administrator makes the determinations required under clause (ii), such a temporary extreme and unusual fuel and fuel additive supply circumstances waiver shall be permitted only if—(I) the waiver applies to the smallest geographic area necessary to address the extreme and unusual fuel and fuel additive supply circumstances;(II) the waiver is effective for a period of 20 calendar days or, if the Administrator determines that a shorter waiver period is adequate, for the shortest practicable time period necessary to permit the correction of the extreme and unusual fuel and fuel additive supply circumstances and to mitigate impact on air quality;(III) the waiver permits a transitional period, the exact duration of which shall be determined by the Administrator (but which shall be for the shortest practicable period), after the termination of the temporary waiver to permit wholesalers and retailers to blend down their wholesale and retail inventory;(IV) the waiver applies to all persons in the motor fuel distribution system; and(V) the Administrator has given public notice to all parties in the motor fuel distribution system, and local and State regulators, in the State or region to be covered by the waiver.
The term “motor fuel distribution system” as used in this clause shall be defined by the Administrator through rulemaking.
(iv) Within 180 days of August 8, 2005, the Administrator shall promulgate regulations to implement clauses (ii) and (iii).
(v)3
3 So in original. Two cls. (v) have been enacted.
Nothing in this subparagraph shall—(I) limit or otherwise affect the application of any other waiver authority of the Administrator pursuant to this section or pursuant to a regulation promulgated pursuant to this section; and(II) subject any State or person to an enforcement action, penalties, or liability solely arising from actions taken pursuant to the issuance of a waiver under this subparagraph.(v)(I)3 The Administrator shall have no authority, when considering a State implementation plan or a State implementation plan revision, to approve under this paragraph any fuel included in such plan or revision if the effect of such approval increases the total number of fuels approved under this paragraph as of September 1, 2004, in all State implementation plans.(II) The Administrator, in consultation with the Secretary of Energy, shall determine the total number of fuels approved under this paragraph as of September 1, 2004, in all State implementation plans and shall publish a list of such fuels, including the States and Petroleum Administration for Defense District in which they are used, in the Federal Register for public review and comment no later than 90 days after August 8, 2005.(III) The Administrator shall remove a fuel from the list published under subclause (II) if a fuel ceases to be included in a State implementation plan or if a fuel in a State implementation plan is identical to a Federal fuel formulation implemented by the Administrator, but the Administrator shall not reduce the total number of fuels authorized under the list published under subclause (II).(IV) Subclause (I) shall not limit the Administrator’s authority to approve a control or prohibition respecting any new fuel under this paragraph in a State implementation plan or revision to a State implementation plan if such new fuel—(aa) completely replaces a fuel on the list published under subclause (II); or(bb) does not increase the total number of fuels on the list published under subclause (II) as of September 1, 2004.(V) The Administrator shall have no authority under this paragraph, when considering any particular State’s implementation plan or a revision to that State’s implementation plan, to approve any fuel unless that fuel was, as of the date of such consideration, approved in at least one State implementation plan in the applicable Petroleum Administration for Defense District. However, the Administrator may approve as part of a State implementation plan or State implementation plan revision a fuel with a summertime Reid Vapor Pressure of 7.0 psi. In no event shall such approval by the Administrator cause an increase in the total number of fuels on the list published under subclause (II).(VI) Nothing in this clause shall be construed to have any effect regarding any available authority of States to require the use of any fuel additive registered in accordance with subsection (b), including any fuel additive registered in accordance with subsection (b) after August 8, 2005.
In the event that the total number of fuels on the list published under subclause (II) at the time of the Administrator’s consideration of a control or prohibition respecting a new fuel is lower than the total number of fuels on such list as of September 1, 2004, the Administrator may approve a control or prohibition respecting a new fuel under this subclause if the Administrator, after consultation with the Secretary of Energy, publishes in the Federal Register after notice and comment a finding that, in the Administrator’s judgment, such control or prohibition respecting a new fuel will not cause fuel supply or distribution interruptions or have a significant adverse impact on fuel producibility in the affected area or contiguous areas.
(d) Penalties and injunctions
(1) Civil penalties
(2) Injunctive authority
(e) Testing of fuels and fuel additives
(1) Not later than one year after August 7, 1977, and after notice and opportunity for a public hearing, the Administrator shall promulgate regulations which implement the authority under subsection (b)(2)(A) and (B) with respect to each fuel or fuel additive which is registered on the date of promulgation of such regulations and with respect to each fuel or fuel additive for which an application for registration is filed thereafter.
(2) Regulations under subsection (b) to carry out this subsection shall require that the requisite information be provided to the Administrator by each such manufacturer—
(A) prior to registration, in the case of any fuel or fuel additive which is not registered on the date of promulgation of such regulations; or
(B) not later than three years after the date of promulgation of such regulations, in the case of any fuel or fuel additive which is registered on such date.
(3) In promulgating such regulations, the Administrator may—
(A) exempt any small business (as defined in such regulations) from or defer or modify the requirements of, such regulations with respect to any such small business;
(B) provide for cost-sharing with respect to the testing of any fuel or fuel additive which is manufactured or processed by two or more persons or otherwise provide for shared responsibility to meet the requirements of this section without duplication; or
(C) exempt any person from such regulations with respect to a particular fuel or fuel additive upon a finding that any additional testing of such fuel or fuel additive would be duplicative of adequate existing testing.
(f) New fuels and fuel additives
(1)
(A) Effective upon March 31, 1977, it shall be unlawful for any manufacturer of any fuel or fuel additive to first introduce into commerce, or to increase the concentration in use of, any fuel or fuel additive for general use in light duty motor vehicles manufactured after model year 1974 which is not substantially similar to any fuel or fuel additive utilized in the certification of any model year 1975, or subsequent model year, vehicle or engine under section 7525 of this title.
(B) Effective upon November 15, 1990, it shall be unlawful for any manufacturer of any fuel or fuel additive to first introduce into commerce, or to increase the concentration in use of, any fuel or fuel additive for use by any person in motor vehicles manufactured after model year 1974 which is not substantially similar to any fuel or fuel additive utilized in the certification of any model year 1975, or subsequent model year, vehicle or engine under section 7525 of this title.
(2) Effective November 30, 1977, it shall be unlawful for any manufacturer of any fuel to introduce into commerce any gasoline which contains a concentration of manganese in excess of .0625 grams per gallon of fuel, except as otherwise provided pursuant to a waiver under paragraph (4).
(3) Any manufacturer of any fuel or fuel additive which prior to March 31, 1977, and after January 1, 1974, first introduced into commerce or increased the concentration in use of a fuel or fuel additive that would otherwise have been prohibited under paragraph (1)(A) if introduced on or after March 31, 1977 shall, not later than September 15, 1978, cease to distribute such fuel or fuel additive in commerce. During the period beginning 180 days after August 7, 1977, and before September 15, 1978, the Administrator shall prohibit, or restrict the concentration of any fuel additive which he determines will cause or contribute to the failure of an emission control device or system (over the useful life of any vehicle in which such device or system is used) to achieve compliance by the vehicle with the emission standards with respect to which it has been certified under section 7525 of this title.
(4) The Administrator, upon application of any manufacturer of any fuel or fuel additive, may waive the prohibitions established under paragraph (1) or (3) of this subsection or the limitation specified in paragraph (2) of this subsection, if he determines that the applicant has established that such fuel or fuel additive or a specified concentration thereof, and the emission products of such fuel or fuel additive or specified concentration thereof, will not cause or contribute to a failure of any emission control device or system (over the useful life of the motor vehicle, motor vehicle engine, nonroad engine or nonroad vehicle in which such device or system is used) to achieve compliance by the vehicle or engine with the emission standards with respect to which it has been certified pursuant to sections 7525 and 7547(a) of this title. The Administrator shall take final action to grant or deny an application submitted under this paragraph, after public notice and comment, within 270 days of the receipt of such an application.
(5) No action of the Administrator under this section may be stayed by any court pending judicial review of such action.
(g) Misfueling
(1) No person shall introduce, or cause or allow the introduction of, leaded gasoline into any motor vehicle which is labeled “unleaded gasoline only,” which is equipped with a gasoline tank filler inlet designed for the introduction of unleaded gasoline, which is a 1990 or later model year motor vehicle, or which such person knows or should know is a vehicle designed solely for the use of unleaded gasoline.
(2) Beginning October 1, 1993, no person shall introduce or cause or allow the introduction into any motor vehicle of diesel fuel which such person knows or should know contains a concentration of sulfur in excess of 0.05 percent (by weight) or which fails to meet a cetane index minimum of 40 or such equivalent alternative aromatic level as prescribed by the Administrator under subsection (i)(2).
(h) Reid Vapor Pressure requirements
(1) Prohibition
(2) Attainment areas
(3) Effective date; enforcement
(4) Ethanol waiverFor fuel blends containing gasoline and 10 percent denatured anhydrous ethanol, the Reid vapor pressure limitation under this subsection shall be one pound per square inch (psi) greater than the applicable Reid vapor pressure limitations established under paragraph (1); Provided, however, That a distributor, blender, marketer, reseller, carrier, retailer, or wholesale purchaser-consumer shall be deemed to be in full compliance with the provisions of this subsection and the regulations promulgated thereunder if it can demonstrate (by showing receipt of a certification or other evidence acceptable to the Administrator) that—
(A) the gasoline portion of the blend complies with the Reid vapor pressure limitations promulgated pursuant to this subsection;
(B) the ethanol portion of the blend does not exceed its waiver condition under subsection (f)(4); and
(C) no additional alcohol or other additive has been added to increase the Reid Vapor Pressure of the ethanol portion of the blend.
(5) Exclusion from ethanol waiver
(A) Promulgation of regulations
(B) Deadline for promulgation
(C) Effective date
(i) In generalWith respect to an area in a State for which the Governor submits a notification under subparagraph (A), the regulations under that subparagraph shall take effect on the later of—(I) the first day of the first high ozone season for the area that begins after the date of receipt of the notification; or(II) 1 year after the date of receipt of the notification.
(ii) Extension of effective date based on determination of insufficient supply(I) In generalIf, after receipt of a notification with respect to an area from a Governor of a State under subparagraph (A), the Administrator determines, on the Administrator’s own motion or on petition of any person and after consultation with the Secretary of Energy, that the promulgation of regulations described in subparagraph (A) would result in an insufficient supply of gasoline in the State, the Administrator, by regulation—(aa) shall extend the effective date of the regulations under clause (i) with respect to the area for not more than 1 year; and(bb) may renew the extension under item (aa) for two additional periods, each of which shall not exceed 1 year.(II) Deadline for action on petitions
(6) Areas covered
(i) Sulfur span requirements for diesel fuel
(1) Effective October 1, 1993, no person shall manufacture, sell, supply, offer for sale or supply, dispense, transport, or introduce into commerce motor vehicle diesel fuel which contains a concentration of sulfur in excess of 0.05 percent (by weight) or which fails to meet a cetane index minimum of 40.
(2) Not later than 12 months after November 15, 1990, the Administrator shall promulgate regulations to implement and enforce the requirements of paragraph (1). The Administrator may require manufacturers and importers of diesel fuel not intended for use in motor vehicles to dye such fuel in a particular manner in order to segregate it from motor vehicle diesel fuel. The Administrator may establish an equivalent alternative aromatic level to the cetane index specification in paragraph (1).
(3) The sulfur span of fuel required to be used in the certification of 1991 through 1993 model year heavy-duty diesel vehicles and engines shall be 0.10 percent (by weight). The sulfur span and cetane index minimum of fuel required to be used in the certification of 1994 and later model year heavy-duty diesel vehicles and engines shall comply with the regulations promulgated under paragraph (2).
(4) The States of Alaska and Hawaii may be exempted from the requirements of this subsection in the same manner as provided in section 7625 4
4 So in original. Probably should be section “7625–1”.
of this title. The Administrator shall take final action on any petition filed under section 7625 4 of this title or this paragraph for an exemption from the requirements of this subsection, within 12 months from the date of the petition.(j) Lead substitute gasoline additives
(1) After November 15, 1990, any person proposing to register any gasoline additive under subsection (a) or to use any previously registered additive as a lead substitute may also elect to register the additive as a lead substitute gasoline additive for reducing valve seat wear by providing the Administrator with such relevant information regarding product identity and composition as the Administrator deems necessary for carrying out the responsibilities of paragraph (2) of this subsection (in addition to other information which may be required under subsection (b)).
(2) In addition to the other testing which may be required under subsection (b), in the case of the lead substitute gasoline additives referred to in paragraph (1), the Administrator shall develop and publish a test procedure to determine the additives’ effectiveness in reducing valve seat wear and the additives’ tendencies to produce engine deposits and other adverse side effects. The test procedures shall be developed in cooperation with the Secretary of Agriculture and with the input of additive manufacturers, engine and engine components manufacturers, and other interested persons. The Administrator shall enter into arrangements with an independent laboratory to conduct tests of each additive using the test procedures developed and published pursuant to this paragraph. The Administrator shall publish the results of the tests by company and additive name in the Federal Register along with, for comparison purposes, the results of applying the same test procedures to gasoline containing 0.1 gram of lead per gallon in lieu of the lead substitute gasoline additive. The Administrator shall not rank or otherwise rate the lead substitute additives. Test procedures shall be established within 1 year after November 15, 1990. Additives shall be tested within 18 months of November 15, 1990, or 6 months after the lead substitute additives are identified to the Administrator, whichever is later.
(3) The Administrator may impose a user fee to recover the costs of testing of any fuel additive referred to in this subsection. The fee shall be paid by the person proposing to register the fuel additive concerned. Such fee shall not exceed $20,000 for a single fuel additive.
(4) There are authorized to be appropriated to the Administrator not more than $1,000,000 for the second full fiscal year after November 15, 1990, to establish test procedures and conduct engine tests as provided in this subsection. Not more than $500,000 per year is authorized to be appropriated for each of the 5 subsequent fiscal years.
(5) Any fees collected under this subsection shall be deposited in a special fund in the United States Treasury for licensing and other services which thereafter shall be available for appropriation, to remain available until expended, to carry out the Agency’s activities for which the fees were collected.
(k) Reformulated gasoline for conventional vehicles
(1) EPA regulations
(A) In general
(B) Maintenance of toxic air pollutant emissions reductions from reformulated gasoline
(i) Definition of PADD
(ii) Regulations concerning emissions of toxic air pollutants
(iii) Standards applicable to specific refineries or importers(I) Applicability of standards(II) Applicability of other standards
(iv) Credit program
(v) Regional protection of toxics reduction baselines(I) In generalNot later than 60 days after August 8, 2005, and not later than April 1 of each calendar year that begins after August 8, 2005, the Administrator shall publish in the Federal Register a report that specifies, with respect to the previous calendar year—(aa) the quantity of reformulated gasoline produced that is in excess of the average annual quantity of reformulated gasoline produced in 2001 and 2002; and(bb) the reduction of the average annual aggregate emissions of toxic air pollutants in each PADD, based on retail survey data or data from other appropriate sources.(II) Effect of failure to maintain aggregate toxics reductionsIf, in any calendar year, the reduction of the average annual aggregate emissions of toxic air pollutants in a PADD fails to meet or exceed the reduction of the average annual aggregate emissions of toxic air pollutants in the PADD in calendar years 2001 and 2002, the Administrator, not later than 90 days after the date of publication of the report for the calendar year under subclause (I), shall—(aa) identify, to the maximum extent practicable, the reasons for the failure, including the sources, volumes, and characteristics of reformulated gasoline that contributed to the failure; and(bb) promulgate revisions to the regulations promulgated under clause (ii), to take effect not earlier than 180 days but not later than 270 days after the date of promulgation, to provide that, notwithstanding clause (iii)(II), all reformulated gasoline produced or distributed at each refiner or importer shall meet the standards applicable under clause (iii)(I) beginning not later than April 1 of the calendar year following publication of the report under subclause (I) and in each calendar year thereafter.
(vi) Not later than July 1, 2007, the Administrator shall promulgate final regulations to control hazardous air pollutants from motor vehicles and motor vehicle fuels, as provided for in section 80.1045 of title 40, Code of Federal Regulations (as in effect on August 8, 2005), and as authorized under section 7521(l) 5
5 So in original. See References in Text note below.
of this title. If the Administrator promulgates by such date, final regulations to control hazardous air pollutants from motor vehicles and motor vehicle fuels that achieve and maintain greater overall reductions in emissions of air toxics from reformulated gasoline than the reductions that would be achieved under subsection (k)(1)(B) as amended by this clause, then subsections (k)(1)(B)(i) through (k)(1)(B)(v) shall be null and void and regulations promulgated thereunder shall be rescinded and have no further effect.(2) General requirementsThe regulations referred to in paragraph (1) shall require that reformulated gasoline comply with paragraph (3) and with each of the following requirements (subject to paragraph (7)):
(A) NOx emissions
(B) Benzene span
(C) Heavy metals
(3) More stringent of formula or performance standardsThe regulations referred to in paragraph (1) shall require compliance with the more stringent of either the requirements set forth in subparagraph (A) or the requirements of subparagraph (B) of this paragraph. For purposes of determining the more stringent provision, clause (i) and clause (ii) of subparagraph (B) shall be considered independently.
(A) Formula
(i) Benzene
(ii) Aromatics
(iii) Lead
(iv) Detergents
(B) Performance standard
(i) VOC emissions
(ii) Toxics
Any reduction greater than a specific percentage reduction required under this subparagraph shall be treated as satisfying such percentage reduction requirement.
(4) Certification procedures
(A) Regulations
(B) Certification; equivalencyThe Administrator shall certify a fuel formulation or slate of fuel formulations as complying with this subsection if such fuel or fuels—
(i) comply with the requirements of paragraph (2), and
(ii) achieve equivalent or greater reductions in emissions of ozone forming volatile organic compounds and emissions of toxic air pollutants than are achieved by a reformulated gasoline meeting the applicable requirements of paragraph (3).
(C) EPA determination of emissions level
(5) ProhibitionEffective beginning January 1, 1995, each of the following shall be a violation of this subsection:
(A) The sale or dispensing by any person of conventional gasoline to ultimate consumers in any covered area.
(B) The sale or dispensing by any refiner, blender, importer, or marketer of conventional gasoline for resale in any covered area, without (i) segregating such gasoline from reformulated gasoline, and (ii) clearly marking such conventional gasoline as “conventional gasoline, not for sale to ultimate consumer in a covered area”.
Any refiner, blender, importer or marketer who purchases property 6
6 So in original. Probably should be “properly”.
segregated and marked conventional gasoline, and thereafter labels, represents, or wholesales such gasoline as reformulated gasoline shall also be in violation of this subsection. The Administrator may impose sampling, testing, and recordkeeping requirements upon any refiner, blender, importer, or marketer to prevent violations of this section.(6) Opt-in areas
(A) Classified areas
(i) In general
(ii) Effect of insufficient domestic capacity to produce reformulated gasoline
(B) Ozone transport region
(i) Application of prohibition(I) In general(II) Publication of application
(ii) Period of applicabilityUnder clause (i), the prohibition specified in paragraph (5) shall apply in a State—(I) commencing as soon as practicable but not later than 2 years after the date of approval by the Administrator of the application of the Governor of the State; and(II) ending not earlier than 4 years after the commencement date determined under subclause (I).
(iii) Extension of commencement date based on insufficient capacity(I) In generalIf, after receipt of an application from a Governor of a State under clause (i), the Administrator determines, on the Administrator’s own motion or on petition of any person, after consultation with the Secretary of Energy, that there is insufficient capacity to supply reformulated gasoline, the Administrator, by regulation—(aa) shall extend the commencement date with respect to the State under clause (ii)(I) for not more than 1 year; and(bb) may renew the extension under item (aa) for 2 additional periods, each of which shall not exceed 1 year.(II) Deadline for action on petitions
(7) Credits
(A) The regulations promulgated under this subsection shall provide for the granting of an appropriate amount of credits to a person who refines, blends, or imports and certifies a gasoline or slate of gasoline that—
(i) has an aromatic hydrocarbon span (by volume) that is less than the maximum aromatic hydrocarbon span required to comply with paragraph (3); or
(ii) has a benzene span (by volume) that is less than the maximum benzene span specified in paragraph (2).
(B) The regulations described in subparagraph (A) shall also provide that a person who is granted credits may use such credits, or transfer all or a portion of such credits to another person for use within the same nonattainment area, for the purpose of complying with this subsection.
(C) The regulations promulgated under subparagraphs (A) and (B) shall ensure the enforcement of the requirements for the issuance, application, and transfer of the credits. Such regulations shall prohibit the granting or transfer of such credits for use with respect to any gasoline in a nonattainment area, to the extent the use of such credits would result in any of the following:
(i) An average gasoline aromatic hydrocarbon span (by volume) for the nonattainment (taking into account all gasoline sold for use in conventional gasoline-fueled vehicles in the nonattainment area) higher than the average fuel aromatic hydrocarbon span (by volume) that would occur in the absence of using any such credits.
(ii) An average benzene span (by volume) for the nonattainment area (taking into account all gasoline sold for use in conventional gasoline-fueled vehicles in the nonattainment area) higher than the average benzene span (by volume) that would occur in the absence of using any such credits.
(8) Anti-dumping rules
(A) In general
(B) Adjustments
(C) Compliance determined for each pollutant independently
(D) Compliance period
(E) Baseline for determining compliance
(9) Emissions from entire vehicle
(10) DefinitionsFor purposes of this subsection—
(A) Baseline vehicles
(B) Baseline gasoline
(i) Summertime
(ii) Wintertime
(C) Toxic air pollutants
(D) Covered area
(E) Reformulated gasoline
(F) Conventional gasoline
(l) Detergents
(m) Oxygenated fuels
(1) Plan revisions for CO nonattainment areas
(A) Each State in which there is located all or part of an area which is designated under subchapter I as a nonattainment area for carbon monoxide and which has a carbon monoxide design value of 9.5 parts per million (ppm) or above based on data for the 2-year period of 1988 and 1989 and calculated according to the most recent interpretation methodology issued by the Administrator prior to November 15, 1990, shall submit to the Administrator a State implementation plan revision under section 7410 of this title and part D of subchapter I for such area which shall contain the provisions specified under this subsection regarding oxygenated gasoline.
(B) A plan revision which contains such provisions shall also be submitted by each State in which there is located any area which, for any 2-year period after 1989 has a carbon monoxide design value of 9.5 ppm or above. The revision shall be submitted within 18 months after such 2-year period.
(2) Oxygenated gasoline in CO nonattainment areasEach plan revision under this subsection shall contain provisions to require that any gasoline sold, or dispensed, to the ultimate consumer in the carbon monoxide nonattainment area or sold or dispensed directly or indirectly by fuel refiners or marketers to persons who sell or dispense to ultimate consumers, in the larger of—
(A) the Consolidated Metropolitan Statistical Area (CMSA) in which the area is located, or
(B) if the area is not located in a CMSA, the Metropolitan Statistical Area in which the area is located,
be blended, during the portion of the year in which the area is prone to high ambient concentrations of carbon monoxide to contain not less than 2.7 percent oxygen by weight (subject to a testing tolerance established by the Administrator). The portion of the year in which the area is prone to high ambient concentrations of carbon monoxide shall be as determined by the Administrator, but shall not be less than 4 months. At the request of a State with respect to any area designated as nonattainment for carbon monoxide, the Administrator may reduce the period specified in the preceding sentence if the State can demonstrate that because of meteorological conditions, a reduced period will assure that there will be no exceedances of the carbon monoxide standard outside of such reduced period. For areas with a carbon monoxide design value of 9.5 ppm or more of 7
7 So in original. Probably should be “as of”.
November 15, 1990, the revision shall provide that such requirement shall take effect no later than November 1, 1992 (or at such other date during 1992 as the Administrator establishes under the preceding provisions of this paragraph). For other areas, the revision shall provide that such requirement shall take effect no later than November 1 of the third year after the last year of the applicable 2-year period referred to in paragraph (1) (or at such other date during such third year as the Administrator establishes under the preceding provisions of this paragraph) and shall include a program for implementation and enforcement of the requirement consistent with guidance to be issued by the Administrator.(3) Waivers
(A) The Administrator shall waive, in whole or in part, the requirements of paragraph (2) upon a demonstration by the State to the satisfaction of the Administrator that the use of oxygenated gasoline would prevent or interfere with the attainment by the area of a national primary ambient air quality standard (or a State or local ambient air quality standard) for any air pollutant other than carbon monoxide.
(B) The Administrator shall, upon demonstration by the State satisfactory to the Administrator, waive the requirement of paragraph (2) where the Administrator determines that mobile sources of carbon monoxide do not contribute significantly to carbon monoxide levels in an area.
(C)
(i) Any person may petition the Administrator to make a finding that there is, or is likely to be, for any area, an inadequate domestic supply of, or distribution capacity for, oxygenated gasoline meeting the requirements of paragraph (2) or fuel additives (oxygenates) necessary to meet such requirements. The Administrator shall act on such petition within 6 months after receipt of the petition.
(ii) If the Administrator determines, in response to a petition under clause (i), that there is an inadequate supply or capacity described in clause (i), the Administrator shall delay the effective date of paragraph (2) for 1 year. Upon petition, the Administrator may extend such effective date for one additional year. No partial delay or lesser waiver may be granted under this clause.
(iii) In granting waivers under this subparagraph the Administrator shall consider distribution capacity separately from the adequacy of domestic supply and shall grant such waivers in such manner as will assure that, if supplies of oxygenated gasoline are limited, areas having the highest design value for carbon monoxide will have a priority in obtaining oxygenated gasoline which meets the requirements of paragraph (2).
(iv) As used in this subparagraph, the term distribution capacity includes capacity for transportation, storage, and blending.
(4) Fuel dispensing systems
(5) Guidelines for credit
(6) Attainment areas
(7) Failure to attain CO standard
(n) Prohibition on leaded gasoline for highway use
(o) Renewable fuel program
(1) DefinitionsIn this section:
(A) Additional renewable fuel
(B) Advanced biofuel
(i) In general
(ii) InclusionsThe types of fuels eligible for consideration as “advanced biofuel” may include any of the following:(I) Ethanol derived from cellulose, hemicellulose, or lignin.(II) Ethanol derived from sugar or starch (other than corn starch).(III) Ethanol derived from waste material, including crop residue, other vegetative waste material, animal waste, and food waste and yard waste.(IV) Biomass-based diesel.(V) Biogas (including landfill gas and sewage waste treatment gas) produced through the conversion of organic matter from renewable biomass.(VI) Butanol or other alcohols produced through the conversion of organic matter from renewable biomass.(VII) Other fuel derived from cellulosic biomass.
(C) Baseline lifecycle greenhouse gas emissions
(D) Biomass-based diesel
(E) Cellulosic biofuel
(F) Conventional biofuel
(G) Greenhouse gas
(H) Lifecycle greenhouse gas emissions
(I) Renewable biomassThe term “renewable biomass” means each of the following:
(i) Planted crops and crop residue harvested from agricultural land cleared or cultivated at any time prior to December 19, 2007, that is either actively managed or fallow, and nonforested.
(ii) Planted trees and tree residue from actively managed tree plantations on non-federal 10
10 So in original. Probably should be “non-Federal”.
land cleared at any time prior to December 19, 2007, including land belonging to an Indian tribe or an Indian individual, that is held in trust by the United States or subject to a restriction against alienation imposed by the United States.(iii) Animal waste material and animal byproducts.
(iv) Slash and pre-commercial thinnings that are from non-federal 10 forestlands, including forestlands belonging to an Indian tribe or an Indian individual, that are held in trust by the United States or subject to a restriction against alienation imposed by the United States, but not forests or forestlands that are ecological communities with a global or State ranking of critically imperiled, imperiled, or rare pursuant to a State Natural Heritage Program, old growth forest, or late successional forest.
(v) Biomass obtained from the immediate vicinity of buildings and other areas regularly occupied by people, or of public infrastructure, at risk from wildfire.
(vi) Algae.
(vii) Separated yard waste or food waste, including recycled cooking and trap grease.
(J) Renewable fuel
(K) Small refinery
(L) Transportation fuel
(2) Renewable fuel program
(A) Regulations
(i) In general
(ii) Noncontiguous State opt-in(I) In general(II) Other actionsIn carrying out this clause, the Administrator may—(aa) issue or revise regulations under this paragraph;(bb) establish applicable percentages under paragraph (3);(cc) provide for the generation of credits under paragraph (5); and(dd) take such other actions as are necessary to allow for the application of the renewable fuels program in a noncontiguous State or territory.
(iii) Provisions of regulationsRegardless of the date of promulgation, the regulations promulgated under clause (i)—(I) shall contain compliance provisions applicable to refineries, blenders, distributors, and importers, as appropriate, to ensure that the requirements of this paragraph are met; but(II) shall not—(aa) restrict geographic areas in which renewable fuel may be used; or(bb) impose any per-gallon obligation for the use of renewable fuel.
(iv) Requirement in case of failure to promulgate regulations
(B) Applicable volumes
(i) Calendar years after 2005(I) Renewable fuel(II) Advanced biofuel(III) Cellulosic biofuel(IV) Biomass-based diesel
(ii) Other calendar yearsFor the purposes of subparagraph (A), the applicable volumes of each fuel specified in the tables in clause (i) for calendar years after the calendar years specified in the tables shall be determined by the Administrator, in coordination with the Secretary of Energy and the Secretary of Agriculture, based on a review of the implementation of the program during calendar years specified in the tables, and an analysis of—(I) the impact of the production and use of renewable fuels on the environment, including on air quality, climate change, conversion of wetlands, ecosystems, wildlife habitat, water quality, and water supply;(II) the impact of renewable fuels on the energy security of the United States;(III) the expected annual rate of future commercial production of renewable fuels, including advanced biofuels in each category (cellulosic biofuel and biomass-based diesel);(IV) the impact of renewable fuels on the infrastructure of the United States, including deliverability of materials, goods, and products other than renewable fuel, and the sufficiency of infrastructure to deliver and use renewable fuel;(V) the impact of the use of renewable fuels on the cost to consumers of transportation fuel and on the cost to transport goods; and(VI) the impact of the use of renewable fuels on other factors, including job creation, the price and supply of agricultural commodities, rural economic development, and food prices.
The Administrator shall promulgate rules establishing the applicable volumes under this clause no later than 14 months before the first year for which such applicable volume will apply.
(iii) Applicable volume of advanced biofuel
(iv) Applicable volume of cellulosic biofuel
(v) Minimum applicable volume of biomass-based diesel
(3) Applicable percentages
(A) Provision of estimate of volumes of gasoline sales
(B) Determination of applicable percentages
(i) In general
(ii) Required elementsThe renewable fuel obligation determined for a calendar year under clause (i) shall—(I) be applicable to refineries, blenders, and importers, as appropriate;(II) be expressed in terms of a volume percentage of transportation fuel sold or introduced into commerce in the United States; and(III) subject to subparagraph (C)(i), consist of a single applicable percentage that applies to all categories of persons specified in subclause (I).
(C) AdjustmentsIn determining the applicable percentage for a calendar year, the Administrator shall make adjustments—
(i) to prevent the imposition of redundant obligations on any person specified in subparagraph (B)(ii)(I); and
(ii) to account for the use of renewable fuel during the previous calendar year by small refineries that are exempt under paragraph (9).
(4) Modification of greenhouse gas reduction percentages
(A) In general
(B) Amount of adjustment
(C) Adjusted reduction levels
(D) 5-year review
(E) Subsequent adjustments
(F) Limit on upward adjustments
(G) Applicability of adjustments
(5) Credit program
(A) In generalThe regulations promulgated under paragraph (2)(A) shall provide—
(i) for the generation of an appropriate amount of credits by any person that refines, blends, or imports gasoline that contains a quantity of renewable fuel that is greater than the quantity required under paragraph (2);
(ii) for the generation of an appropriate amount of credits for biodiesel; and
(iii) for the generation of credits by small refineries in accordance with paragraph (9)(C).
(B) Use of credits
(C) Duration of credits
(D) Inability to generate or purchase sufficient creditsThe regulations promulgated under paragraph (2)(A) shall include provisions allowing any person that is unable to generate or purchase sufficient credits to meet the requirements of paragraph (2) to carry forward a renewable fuel deficit on condition that the person, in the calendar year following the year in which the renewable fuel deficit is created—
(i) achieves compliance with the renewable fuel requirement under paragraph (2); and
(ii) generates or purchases additional renewable fuel credits to offset the renewable fuel deficit of the previous year.
(E) Credits for additional renewable fuel
(6) Seasonal variations in renewable fuel use
(A) Study
(B) Regulation of excessive seasonal variations
(C) DeterminationsThe determinations referred to in subparagraph (B) are that—
(i) less than 25 percent of the quantity of renewable fuel necessary to meet the requirements of paragraph (2) has been used during 1 of the 2 periods specified in subparagraph (D) of the calendar year;
(ii) a pattern of excessive seasonal variation described in clause (i) will continue in subsequent calendar years; and
(iii) promulgating regulations or other requirements to impose a 25 percent or more seasonal use of renewable fuels will not prevent or interfere with the attainment of national ambient air quality standards or significantly increase the price of motor fuels to the consumer.
(D) PeriodsThe 2 periods referred to in this paragraph are—
(i) April through September; and
(ii) January through March and October through December.
(E) Exclusion
(F) State exemption from seasonality requirements
(7) Waivers
(A) In generalThe Administrator, in consultation with the Secretary of Agriculture and the Secretary of Energy, may waive the requirements of paragraph (2) in whole or in part on petition by one or more States, by any person subject to the requirements of this subsection, or by the Administrator on his own motion by reducing the national quantity of renewable fuel required under paragraph (2)—
(i) based on a determination by the Administrator, after public notice and opportunity for comment, that implementation of the requirement would severely harm the economy or environment of a State, a region, or the United States; or
(ii) based on a determination by the Administrator, after public notice and opportunity for comment, that there is an inadequate domestic supply.
(B) Petitions for waivers
(C) Termination of waivers
(D) Cellulosic biofuel
(i) For any calendar year for which the projected volume of cellulosic biofuel production is less than the minimum applicable volume established under paragraph (2)(B), as determined by the Administrator based on the estimate provided under paragraph (3)(A), not later than November 30 of the preceding calendar year, the Administrator shall reduce the applicable volume of cellulosic biofuel required under paragraph (2)(B) to the projected volume available during that calendar year. For any calendar year in which the Administrator makes such a reduction, the Administrator may also reduce the applicable volume of renewable fuel and advanced biofuels requirement established under paragraph (2)(B) by the same or a lesser volume.
(ii) Whenever the Administrator reduces the minimum cellulosic biofuel volume under this subparagraph, the Administrator shall make available for sale cellulosic biofuel credits at the higher of $0.25 per gallon or the amount by which $3.00 per gallon exceeds the average wholesale price of a gallon of gasoline in the United States. Such amounts shall be adjusted for inflation by the Administrator for years after 2008.
(iii) Eighteen months after December 19, 2007, the Administrator shall promulgate regulations to govern the issuance of credits under this subparagraph. The regulations shall set forth the method for determining the exact price of credits in the event of a waiver. The price of such credits shall not be changed more frequently than once each quarter. These regulations shall include such provisions, including limiting the credits’ uses and useful life, as the Administrator deems appropriate to assist market liquidity and transparency, to provide appropriate certainty for regulated entities and renewable fuel producers, and to limit any potential misuse of cellulosic biofuel credits to reduce the use of other renewable fuels, and for such other purposes as the Administrator determines will help achieve the goals of this subsection. The regulations shall limit the number of cellulosic biofuel credits for any calendar year to the minimum applicable volume (as reduced under this subparagraph) of cellulosic biofuel for that year.
(E) Biomass-based diesel
(i) Market evaluation
(ii) Waiver
(iii) Extensions
(F) Modification of applicable volumesFor any of the tables in paragraph (2)(B), if the Administrator waives—
(i) at least 20 percent of the applicable volume requirement set forth in any such table for 2 consecutive years; or
(ii) at least 50 percent of such volume requirement for a single year,
the Administrator shall promulgate a rule (within 1 year after issuing such waiver) that modifies the applicable volumes set forth in the table concerned for all years following the final year to which the waiver applies, except that no such modification in applicable volumes shall be made for any year before 2016. In promulgating such a rule, the Administrator shall comply with the processes, criteria, and standards set forth in paragraph (2)(B)(ii).
(8) Study and waiver for initial year of program
(A) In general
(B) Required evaluationsThe study shall evaluate renewable fuel—
(i) supplies and prices;
(ii) blendstock supplies; and
(iii) supply and distribution system capabilities.
(C) Recommendations by the Secretary
(D) Waiver
(i) In general
(ii) No effect on waiver authority
(9) Small refineries
(A) Temporary exemption
(i) In general
(ii) Extension of exemption(I) Study by Secretary of Energy(II) Extension of exemption
(B) Petitions based on disproportionate economic hardship
(i) Extension of exemption
(ii) Evaluation of petitions
(iii) Deadline for action on petitions
(C) Credit program
(D) Opt-in for small refineries
(10) Ethanol market concentration analysis
(A) Analysis
(i) In general
(ii) Scoring
(B) Report
(11) Periodic reviewsTo allow for the appropriate adjustment of the requirements described in subparagraph (B) of paragraph (2), the Administrator shall conduct periodic reviews of—
(A) existing technologies;
(B) the feasibility of achieving compliance with the requirements; and
(C) the impacts of the requirements described in subsection (a)(2) 11
11 So in original. Subsection (a) does not contain a par. (2).
on each individual and entity described in paragraph (2).(12) Effect on other provisions
(q)12
12 So in original. No subsec. (p) has been enacted.
Analyses of motor vehicle fuel changes and emissions model(1) Anti-backsliding analysis
(A) Draft analysis
(B) Final analysis
(2) Emissions model
(3) Permeation effects study
(A) In general
(B) Evaporative emissions
(r) Fuel and fuel additive importers and importation
(s) Conversion assistance for cellulosic biomass, waste-derived ethanol, approved renewable fuels
(1) In general
(2) Eligible production facilitiesA production facility shall be eligible to receive a grant under this subsection if the production facility—
(A) is located in the United States; and
(B) uses cellulosic or renewable biomass or waste-derived feedstocks derived from agricultural residues, wood residues, municipal solid waste, or agricultural byproducts.
(3) Authorization of appropriationsThere are authorized to be appropriated the following amounts to carry out this subsection:
(A) $100,000,000 for fiscal year 2006.
(B) $250,000,000 for fiscal year 2007.
(C) $400,000,000 for fiscal year 2008.
(4) DefinitionsFor the purposes of this subsection:
(A) The term “approved renewable fuels” are fuels and components of fuels that have been approved by the Department of Energy, as defined in section 13211 of this title, which have been made from renewable biomass.
(B) The term “renewable biomass” is, as defined in Presidential Executive Order 13134, published in the Federal Register on August 16, 1999, any organic matter that is available on a renewable or recurring basis (excluding old-growth timber), including dedicated energy crops and trees, agricultural food and feed crop residues, aquatic plants, animal wastes, wood and wood residues, paper and paper residues, and other vegetative waste materials. Old-growth timber means timber of a forest from the late successional stage of forest development.
(t) Blending of compliant reformulated gasolines
(1) In generalNotwithstanding subsections (h) and (k) and subject to the limitations in paragraph (2) of this subsection, it shall not be a violation of this part 13
13 See References in Text note below.
for a gasoline retailer, during any month of the year, to blend at a retail location batches of ethanol-blended and non-ethanol-blended reformulated gasoline, provided that—(A) each batch of gasoline to be blended has been individually certified as in compliance with subsections (h) and (k) prior to being blended;
(B) the retailer notifies the Administrator prior to such blending, and identifies the exact location of the retail station and the specific tank in which such blending will take place;
(C) the retailer retains and, as requested by the Administrator or the Administrator’s designee, makes available for inspection such certifications accounting for all gasoline at the retail outlet; and
(D) the retailer does not, between June 1 and September 15 of each year, blend a batch of VOC-controlled, or “summer”, gasoline with a batch of non-VOC-controlled, or “winter”, gasoline (as these terms are defined under subsections (h) and (k)).
(2) Limitations
(A) Frequency limitation
(B) Duration of blending period
(3) Surveys
(4) State implementation plans
(5) Preservation of State lawNothing in this subsection shall—
(A) preempt existing State laws or regulations regulating the blending of compliant gasolines; or
(B) prohibit a State from adopting such restrictions in the future.
(6) Regulations
(7) Effective date
(8) Liability
(9) Formulation of gasoline
(u) Standard specifications for biodiesel
(1) Unless the American Society for Testing and Materials has adopted a standard for diesel fuel containing 20 percent biodiesel (commonly known as “B20”) within 1 year after December 19, 2007, the Administrator shall initiate a rulemaking to establish a uniform per gallon fuel standard for such fuel and designate an identification number so that vehicle manufacturers are able to design engines to use fuel meeting such standard.
(2) Unless the American Society for Testing and Materials has adopted a standard for diesel fuel containing 5 percent biodiesel (commonly known as “B5”) within 1 year after December 19, 2007, the Administrator shall initiate a rulemaking to establish a uniform per gallon fuel standard for such fuel and designate an identification so that vehicle manufacturers are able to design engines to use fuel meeting such standard.
(3) Whenever the Administrator is required to initiate a rulemaking under paragraph (1) or (2), the Administrator shall promulgate a final rule within 18 months after December 19, 2007.
(4) Not later than 180 days after December 19, 2007, the Administrator shall establish an annual inspection and enforcement program to ensure that diesel fuel containing biodiesel sold or distributed in interstate commerce meets the standards established under regulations under this section, including testing and certification for compliance with applicable standards of the American Society for Testing and Materials. There are authorized to be appropriated to carry out the inspection and enforcement program under this paragraph $3,000,000 for each of fiscal years 2008 through 2010.
(5) For purposes of this subsection, the term “biodiesel” has the meaning provided by section 13220(f) of this title.
(v) Prevention of air quality deterioration
(1) Study
(A) In general
(B) ConsiderationsThe study shall include consideration of—
(i) different blend levels, types of renewable fuels, and available vehicle technologies; and
(ii) appropriate national, regional, and local air quality control measures.
(2) RegulationsNot later than 3 years after December 19, 2007, the Administrator shall—
(A) promulgate fuel regulations to implement appropriate measures to mitigate, to the greatest extent achievable, considering the results of the study under paragraph (1), any adverse impacts on air quality, as the result of the renewable volumes required by this section; or
(B) make a determination that no such measures are necessary.
(July 14, 1955, ch. 360, title II, § 211, formerly § 210, as added Pub. L. 90–148, § 2, Nov. 21, 1967, 81 Stat. 502; renumbered and amended Pub. L. 91–604, §§ 8(a), 9(a), Dec. 31, 1970, 84 Stat. 1694, 1698; Pub. L. 92–157, title III, § 302(d), (e), Nov. 18, 1971, 85 Stat. 464; Pub. L. 95–95, title II, §§ 222, 223, title IV, § 401(e), Aug. 7, 1977, 91 Stat. 762, 764, 791; Pub. L. 95–190, § 14(a)(73), (74), Nov. 16, 1977, 91 Stat. 1403, 1404; Pub. L. 101–549, title II, §§ 212–221, 228(d), Nov. 15, 1990, 104 Stat. 2488–2500, 2510; Pub. L. 109–58, title XV, §§ 1501(a)–(c), 1504(a)(1), (b), 1505–1507, 1512, 1513, 1541(a), (b), Aug. 8, 2005, 119 Stat. 1067–1074, 1076, 1077, 1080, 1081, 1088, 1089, 1106, 1107; Pub. L. 110–140, title II, §§ 201, 202, 203(f), 208, 209, 210(b), 247, 251, Dec. 19, 2007, 121 Stat. 1519, 1521, 1529, 1531, 1532, 1547, 1548.)
§ 7546. Renewable fuel
(a) Definitions
In this section:
(1) Municipal solid waste
(2) RFG State
(3) Secretary
(b) Cellulosic biomass ethanol and municipal solid waste loan guarantee program
(1) In general
(2) Demonstration projects
(A) In general
(B) Design capacity
(3) Applicant assurances
An applicant for a loan guarantee under this section shall provide assurances, satisfactory to the Secretary, that—
(A) the project design has been validated through the operation of a continuous process facility with a cumulative output of at least 50,000 gallons of ethanol;
(B) the project has been subject to a full technical review;
(C) the project is covered by adequate project performance guarantees;
(D) the project, with the loan guarantee, is economically viable; and
(E) there is a reasonable assurance of repayment of the guaranteed loan.
(4) Limitations
(A) Maximum guarantee
(B) Additional guarantees
(i) In general
(ii) Principal and interest
(5) Equity contributions
(6) Insufficient amounts
(7) Approval
(c) Authorization of appropriations for resource center
(d) Renewable fuel production research and development grants
(1) In general
(2) Eligibility
(A) In general
(B) Application
(3) Authorization of appropriations
(e) Cellulosic biomass ethanol conversion assistance
(1) In general
(2) Eligible production facilities
A production facility shall be eligible to receive a grant under this subsection if the production facility—
(A) is located in the United States; and
(B) uses cellulosic biomass feedstocks derived from agricultural residues or municipal solid waste.
(3) Authorization of appropriations
There is authorized to be appropriated to carry out this subsection—
(A) $250,000,000 for fiscal year 2006; and
(B) $400,000,000 for fiscal year 2007.
(July 14, 1955, ch. 360, title II, § 212, as added Pub. L. 109–58, title XV, § 1511, Aug. 8, 2005, 119 Stat. 1086.)
§ 7547. Nonroad engines and vehicles
(a) Emissions standards
(1) The Administrator shall conduct a study of emissions from nonroad engines and nonroad vehicles (other than locomotives or engines used in locomotives) to determine if such emissions cause, or significantly contribute to, air pollution which may reasonably be anticipated to endanger public health or welfare. Such study shall be completed within 12 months of November 15, 1990.
(2) After notice and opportunity for public hearing, the Administrator shall determine within 12 months after completion of the study under paragraph (1), based upon the results of such study, whether emissions of carbon monoxide, oxides of nitrogen, and volatile organic compounds from new and existing nonroad engines or nonroad vehicles (other than locomotives or engines used in locomotives) are significant contributors to ozone or carbon monoxide concentrations in more than 1 area which has failed to attain the national ambient air quality standards for ozone or carbon monoxide. Such determination shall be included in the regulations under paragraph (3).
(3) If the Administrator makes an affirmative determination under paragraph (2) the Administrator shall, within 12 months after completion of the study under paragraph (1), promulgate (and from time to time revise) regulations containing standards applicable to emissions from those classes or categories of new nonroad engines and new nonroad vehicles (other than locomotives or engines used in locomotives) which in the Administrator’s judgment cause, or contribute to, such air pollution. Such standards shall achieve the greatest degree of emission reduction achievable through the application of technology which the Administrator determines will be available for the engines or vehicles to which such standards apply, giving appropriate consideration to the cost of applying such technology within the period of time available to manufacturers and to noise, energy, and safety factors associated with the application of such technology. In determining what degree of reduction will be available, the Administrator shall first consider standards equivalent in stringency to standards for comparable motor vehicles or engines (if any) regulated under section 7521 of this title, taking into account the technological feasibility, costs, safety, noise, and energy factors associated with achieving, as appropriate, standards of such stringency and lead time. The regulations shall apply to the useful life of the engines or vehicles (as determined by the Administrator).
(4) If the Administrator determines that any emissions not referred to in paragraph (2) from new nonroad engines or vehicles significantly contribute to air pollution which may reasonably be anticipated to endanger public health or welfare, the Administrator may promulgate (and from time to time revise) such regulations as the Administrator deems appropriate containing standards applicable to emissions from those classes or categories of new nonroad engines and new nonroad vehicles (other than locomotives or engines used in locomotives) which in the Administrator’s judgment cause, or contribute to, such air pollution, taking into account costs, noise, safety, and energy factors associated with the application of technology which the Administrator determines will be available for the engines and vehicles to which such standards apply. The regulations shall apply to the useful life of the engines or vehicles (as determined by the Administrator).
(5) Within 5 years after November 15, 1990, the Administrator shall promulgate regulations containing standards applicable to emissions from new locomotives and new engines used in locomotives. Such standards shall achieve the greatest degree of emission reduction achievable through the application of technology which the Administrator determines will be available for the locomotives or engines to which such standards apply, giving appropriate consideration to the cost of applying such technology within the period of time available to manufacturers and to noise, energy, and safety factors associated with the application of such technology.
(b) Effective date
(c) Safe controls
(d) Enforcement
(July 14, 1955, ch. 360, title II, § 213, as added Pub. L. 93–319, § 10, June 22, 1974, 88 Stat. 261; amended Pub. L. 101–549, title II, § 222(a), Nov. 15, 1990, 104 Stat. 2500.)
§ 7548. Study of particulate emissions from motor vehicles
(a) Study and analysis
(1) The Administrator shall conduct a study concerning the effects on health and welfare of particulate emissions from motor vehicles or motor vehicle engines to which section 7521 of this title applies. Such study shall characterize and quantify such emissions and analyze the relationship of such emissions to various fuels and fuel additives.
(2) The study shall also include an analysis of particulate emissions from mobile sources which are not related to engine emissions (including, but not limited to tire debris, and asbestos from brake lining).
(b) Report to Congress
(July 14, 1955, ch. 360, title II, § 214, as added Pub. L. 95–95, title II, § 224(d), Aug. 7, 1977, 91 Stat. 767.)
§ 7549. High altitude performance adjustments
(a) Instruction of the manufacturer
(1) Any action taken with respect to any element of design installed on or in a motor vehicle or motor vehicle engine in compliance with regulations under this subchapter (including any alteration or adjustment of such element), shall be treated as not in violation of section 7522(a) of this title if such action is performed in accordance with high altitude adjustment instructions provided by the manufacturer under subsection (b) and approved by the Administrator.
(2) If the Administrator finds that adjustments or modifications made pursuant to instructions of the manufacturer under paragraph (1) will not insure emission control performance with respect to each standard under section 7521 of this title at least equivalent to that which would result if no such adjustments or modifications were made, he shall disapprove such instructions. Such finding shall be based upon minimum engineering evaluations consistent with good engineering practice.
(b) Regulations
(1) Instructions respecting each class or category of vehicles or engines to which this subchapter applies providing for such vehicle and engine adjustments and modifications as may be necessary to insure emission control performance at different altitudes shall be submitted by the manufacturer to the Administrator pursuant to regulations promulgated by the Administrator.
(2) Any knowing violation by a manufacturer of requirements of the Administrator under paragraph (1) shall be treated as a violation by such manufacturer of section 7522(a)(3) of this title for purposes of the penalties contained in section 7524 of this title.
(3) Such instructions shall provide, in addition to other adjustments, for adjustments for vehicles moving from high altitude areas to low altitude areas after the initial registration of such vehicles.
(c) Manufacturer parts
(d) State inspection and maintenance programs
(e) High altitude testing
(1) The Administrator shall promptly establish at least one testing center (in addition to the testing centers existing on November 15, 1990) located at a site that represents high altitude conditions, to ascertain in a reasonable manner whether, when in actual use throughout their useful life (as determined under section 7521(d) of this title), each class or category of vehicle and engines to which regulations under section 7521 of this title apply conforms to the emissions standards established by such regulations. For purposes of this subsection, the term “high altitude conditions” refers to high altitude as defined in regulations of the Administrator in effect as of November 15, 1990.
(2) The Administrator, in cooperation with the Secretary of Energy and the Administrator of the Federal Transit Administration, and such other agencies as the Administrator deems appropriate, shall establish a research and technology assessment center to provide for the development and evaluation of less-polluting heavy-duty engines and fuels for use in buses, heavy-duty trucks, and non-road engines and vehicles, which shall be located at a high-altitude site that represents high-altitude conditions. In establishing and funding such a center, the Administrator shall give preference to proposals which provide for local cost-sharing of facilities and recovery of costs of operation through utilization of such facility for the purposes of this section.
(3) The Administrator shall designate at least one center at high-altitude conditions to provide research on after-market emission components, dual-fueled vehicles and conversion kits, the effects of tampering on emissions equipment, testing of alternate fuels and conversion kits, and the development of curricula, training courses, and materials to maximize the effectiveness of inspection and maintenance programs as they relate to promoting effective control of vehicle emissions at high-altitude elevations. Preference shall be given to existing vehicle emissions testing and research centers that have established reputations for vehicle emissions research and development and training, and that possess in-house Federal Test Procedure capacity.
(July 14, 1955, ch. 360, title II, § 215, as added Pub. L. 95–95, title II, § 211(b), Aug. 7, 1977, 91 Stat. 757; amended Pub. L. 95–190, § 14(a)(75), Nov. 16, 1977, 91 Stat. 1404; Pub. L. 101–549, title II, § 224, Nov. 15, 1990, 104 Stat. 2503; Pub. L. 102–240, title III, § 3004(b), Dec. 18, 1991, 105 Stat. 2088.)
§ 7550. Definitions
As used in this part—
(1) The term “manufacturer” as used in sections 7521, 7522, 7525, 7541, and 7542 of this title means any person engaged in the manufacturing or assembling of new motor vehicles, new motor vehicle engines, new nonroad vehicles or new nonroad engines, or importing such vehicles or engines for resale, or who acts for and is under the control of any such person in connection with the distribution of new motor vehicles, new motor vehicle engines, new nonroad vehicles or new nonroad engines, but shall not include any dealer with respect to new motor vehicles, new motor vehicle engines, new nonroad vehicles or new nonroad engines received by him in commerce.
(2) The term “motor vehicle” means any self-propelled vehicle designed for transporting persons or property on a street or highway.
(3) Except with respect to vehicles or engines imported or offered for importation, the term “new motor vehicle” means a motor vehicle the equitable or legal title to which has never been transferred to an ultimate purchaser; and the term “new motor vehicle engine” means an engine in a new motor vehicle or a motor vehicle engine the equitable or legal title to which has never been transferred to the ultimate purchaser; and with respect to imported vehicles or engines, such terms mean a motor vehicle and engine, respectively, manufactured after the effective date of a regulation issued under section 7521 of this title which is applicable to such vehicle or engine (or which would be applicable to such vehicle or engine had it been manufactured for importation into the United States).
(4) The term “dealer” means any person who is engaged in the sale or the distribution of new motor vehicles or new motor vehicle engines to the ultimate purchaser.
(5) The term “ultimate purchaser” means, with respect to any new motor vehicle or new motor vehicle engine, the first person who in good faith purchases such new motor vehicle or new engine for purposes other than resale.
(6) The term “commerce” means (A) commerce between any place in any State and any place outside thereof; and (B) commerce wholly within the District of Columbia.
(7)Vehicle curb weight, gross vehicle weight rating, light-duty truck, light-duty vehicle, and loaded vehicle weight.—The terms “vehicle curb weight”, “gross vehicle weight rating” (GVWR), “light-duty truck” (LDT), light-duty vehicle,1
1 So in original. Probably should be set off by quotation marks.
and “loaded vehicle weight” (LVW) have the meaning provided in regulations promulgated by the Administrator and in effect as of November 15, 1990. The abbreviations in parentheses corresponding to any term referred to in this paragraph shall have the same meaning as the corresponding term.(8)Test weight.—The term “test weight” and the abbreviation “tw” mean the vehicle curb weight added to the gross vehicle weight rating (gvwr) and divided by 2.
(9)Motor vehicle or engine part manufacturer.—The term “motor vehicle or engine part manufacturer” as used in sections 7541 and 7542 of this title means any person engaged in the manufacturing, assembling or rebuilding of any device, system, part, component or element of design which is installed in or on motor vehicles or motor vehicle engines.
(10)Nonroad engine.—The term “nonroad engine” means an internal combustion engine (including the fuel system) that is not used in a motor vehicle or a vehicle used solely for competition, or that is not subject to standards promulgated under section 7411 of this title or section 7521 of this title.
(11)Nonroad vehicle.—The term “nonroad vehicle” means a vehicle that is powered by a nonroad engine and that is not a motor vehicle or a vehicle used solely for competition.
(July 14, 1955, ch. 360, title II, § 216, formerly § 208, as added Pub. L. 89–272, title I, § 101(8), Oct. 20, 1965, 79 Stat. 994; renumbered § 212, and amended Pub. L. 90–148, § 2, Nov. 21, 1967, 81 Stat. 503; renumbered § 213, and amended Pub. L. 91–604, §§ 8(a), 10(d), 11(a)(2)(A), Dec. 31, 1970, 84 Stat. 1694, 1703, 1705; renumbered § 214, Pub. L. 93–319, § 10, June 22, 1974, 88 Stat. 261; renumbered § 216, Pub. L. 95–95, title II, § 224(d), Aug. 7, 1977, 91 Stat. 767; Pub. L. 101–549, title II, § 223, Nov. 15, 1990, 104 Stat. 2503.)
§ 7551. Omitted
§ 7552. Motor vehicle compliance program fees
(a) Fee collection
Consistent with section 9701 of title 31, the Administrator may promulgate (and from time to time revise) regulations establishing fees to recover all reasonable costs to the Administrator associated with—
(1) new vehicle or engine certification under section 7525(a) of this title or part C,
(2) new vehicle or engine compliance monitoring and testing under section 7525(b) of this title or part C, and
(3) in-use vehicle or engine compliance monitoring and testing under section 7541(c) of this title or part C.
The Administrator may establish for all foreign and domestic manufacturers a fee schedule based on such factors as the Administrator finds appropriate and equitable and nondiscriminatory, including the number of vehicles or engines produced under a certificate of conformity. In the case of heavy-duty engine and vehicle manufacturers, such fees shall not exceed a reasonable amount to recover an appropriate portion of such reasonable costs.
(b) Special Treasury fund
(c) Limitation on fund use
(d) Administrator’s testing authority
(July 14, 1955, ch. 360, title II, § 217, as added Pub. L. 101–549, title II, § 225, Nov. 15, 1990, 104 Stat. 2504.)
§ 7553. Prohibition on production of engines requiring leaded gasoline
The Administrator shall promulgate regulations applicable to motor vehicle engines and nonroad engines manufactured after model year 1992 that prohibit the manufacture, sale, or introduction into commerce of any engine that requires leaded gasoline.
(July 14, 1955, ch. 360, title II, § 218, as added Pub. L. 101–549, title II, § 226, Nov. 15, 1990, 104 Stat. 2505.)
§ 7554. Urban bus standards
(a) Standards for model years after 1993
(b) PM standard
(1) 50 percent reduction
(2) Revised reduction
(3) Determination as part of rule
(c) Low-polluting fuel requirement
(1) Annual testing
(2) Promulgation of additional low-polluting fuel requirement
(A) If the Administrator determines, based on the testing under paragraph (1), that urban buses subject to the particulate matter (PM) standard applicable pursuant to subsection (b) do not comply with such standard in use over their full useful life, he shall revise the standards applicable to such buses to require (in addition to compliance with the PM standard applicable pursuant to subsection (b)) that all new urban buses purchased or placed into service by owners or operators of urban buses in all metropolitan statistical areas or consolidated metropolitan statistical areas with a 1980 population of 750,000 or more shall be capable of operating, and shall be exclusively operated, on low-polluting fuels. The Administrator shall establish the pass-fail rate for purposes of testing under this subparagraph.
(B) The Administrator shall promulgate a schedule phasing in any low-polluting fuel requirement established pursuant to this paragraph to an increasing percentage of new urban buses purchased or placed into service in each of the first 5 model years commencing 3 years after the determination under subparagraph (A). Under such schedule 100 percent of new urban buses placed into service in the fifth model year commencing 3 years after the determination under subparagraph (A) shall comply with the low-polluting fuel requirement established pursuant to this paragraph.
(C) The Administrator may extend the requirements of this paragraph to metropolitan statistical areas or consolidated metropolitan statistical areas with a 1980 population of less than 750,000, if the Administrator determines that a significant benefit to public health could be expected to result from such extension.
(d) Retrofit requirements
Not later than 12 months after November 15, 1990, the Administrator shall promulgate regulations under section 7521(a) of this title requiring that urban buses which—
(1) are operating in areas referred to in subparagraph (A) of subsection (c)(2) (or subparagraph (C) of subsection (c)(2) if the Administrator has taken action under that subparagraph);
(2) were not subject to standards in effect under the regulations under subsection (a) of this section; and
(3) have their engines replaced or rebuilt after January 1, 1995,
shall comply with an emissions standard or emissions control technology requirement established by the Administrator in such regulations. Such emissions standard or emissions control technology requirement shall reflect the best retrofit technology and maintenance practices reasonably achievable.
(e) Procedures for administration and enforcement
(f) Definitions
For purposes of this section—
(1) Urban bus
(2) Low-polluting fuel
(July 14, 1955, ch. 360, title II, § 219, as added Pub. L. 101–549, title II, § 227[(a)], Nov. 15, 1990, 104 Stat. 2505.)