Collapse to view only § 432.101 - Special definitions.
- § 432.100 - Applicability.
- § 432.101 - Special definitions.
- § 432.102 - Effluent limitations attainable by the application of the best practicable control technology currently available (BPT).
- § 432.103 - Effluent limitations attainable by the application of the best available technology economically achievable (BAT).
- § 432.104 - Pretreatment standards for existing sources (PSES). [Reserved]
- § 432.105 - New source performance standards (NSPS).
- § 432.106 - Pretreatment standards for new sources (PSNS). [Reserved]
- § 432.107 - Effluent limitations attainable by the application of the best control technology for conventional pollutants (BCT).
§ 432.100 - Applicability.
This part applies to discharges of process wastewater resulting from the production of meat meal, dried animal by-product residues (tankage), animal oils, grease and tallow, and in some cases hide curing, by a renderer.
§ 432.101 - Special definitions.
For the purpose of this subpart:
(a) Raw material (RM) means the basic input materials to a renderer composed of animal and poultry trimmings, bones, meat scraps, dead animals, feathers and related usable by-products.
(b) Renderer means an independent or off-site rendering operation, which is conducted separate from a slaughterhouse, packinghouse or poultry dressing or processing operation, uses raw material at rates greater than 10 million pounds per year, produces meat meal, tankage, animal fats or oils, grease, and tallow, and may cure cattle hides, but excludes marine oils, fish meal, and fish oils.
(c) Tankage means dried animal by-product residues used in feedstuffs.
(d) Tallow means a product made from beef cattle or sheep fat that has a melting point of 40 °C or greater.
§ 432.102 - Effluent limitations attainable by the application of the best practicable control technology currently available (BPT).
(a) Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the application of BPT:
Effluent Limitations
[BPT]
Regulated
parameter | Maximum daily 1 | Maximum monthly avg. 1 | BOD | 0.34 | 0.17 | Fecal Coliform | ( 2) | ( 3) | O&G 4 | 0.20 | 0.10 | TSS | 0.42 | 0.21 |
---|
1 Pounds per 1000 lbs (or g/kg) of raw material (RM).
2 Maximum of 400 MPN or CFU per 100 mL at any time.
3 No maximum monthly average limitation.
4 May be measured as hexane extractable material (HEM).
(b) The limitations for BOD
§ 432.103 - Effluent limitations attainable by the application of the best available technology economically achievable (BAT).
Except as provided by 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the application of BAT:
Effluent Limitations
[BAT]
Regulated
parameter | Maximum daily | Maximum monthly avg. | Ammonia (as N) 1 | 0.14 | 0.07 | Total Nitrogen 2 | 194 | 134 |
---|
1 Pounds per 1000 lbs (g/kg) of raw material (RM).
2 mg/L (ppm).
§ 432.104 - Pretreatment standards for existing sources (PSES). [Reserved]
§ 432.105 - New source performance standards (NSPS).
(a) Except as provided in paragraph (c) of this section, any source that is a new source subject to this subpart must achieve the following performance standards:
Performance Standards
[NSPS]
Regulated
parameter | Maximum daily | Maximum monthly avg. | Ammonia (as N) 1 | 0.14 | 0.07 | BOD | 0.18 | 0.09 | Fecal coliform | ( 2) | ( 3) | O&G 1 4 | 0.10 | 0.05 | Total Nitrogen 5 | 194 | 134 | TSS 1 | 0.22 | 0.11 |
---|
1 Pounds per 1000 lbs (or g/kg) of raw material (RM).
2 Maximum of 400 MPN or CFU per 100 mL at any time.
3 No maximum monthly average limitation.
4 May be measured as hexane extractable material (HEM).
5 mg/L (ppm).
(b) The standards for BOD
(c) Any source that was a new source subject to the standards specified in § 432.105 of title 40 of the Code of Federal Regulations, revised as of July 1, 2003, must continue to achieve the standards specified in this section until the expiration of the applicable time period specified in 40 CFR 122.29(d)(1) after which it must achieve the effluent limitations specified in §§ 432.103 and 432.107.
§ 432.106 - Pretreatment standards for new sources (PSNS). [Reserved]
§ 432.107 - Effluent limitations attainable by the application of the best control technology for conventional pollutants (BCT).
(a) Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the application of BCT: Limitations for BOD
(b) The limitations for BOD