Collapse to view only § 160.016-1 - Applicable specification.
- § 160.016-1 - Applicable specification.
- § 160.016-2 - Requirements.
- § 160.016-4 - Marking.
- § 160.016-5 - Procedure for approval.
§ 160.016-1 - Applicable specification.
(a) The following specification of the issue in effect on the date flame safety lamps are manufactured forms a part of this subpart:
(1) Military specification:
MIL-L-1204, Lamps, Safety, Flame.(b) A copy of the above specification shall be kept on file by the manufacturer together with the approved plan and certificate of approval issued by the Coast Guard.
§ 160.016-2 - Requirements.
(a) Flame safety lamps for use on merchant vessels shall comply with the construction requirements of Military Specification MIL-L-1204.
(b) [Reserved]
§ 160.016-4 - Marking.
(a) Flame safety lamps shall be permanently and legibly marked with the name and address of the manufacturer and the type or model designation for the lamp.
(b) [Reserved]
§ 160.016-5 - Procedure for approval.
(a) General. Flame safety lamps are approved for use on merchant vessels only by the Commandant (CG-ENG-4), Attn: Lifesaving and Fire Safety Division, U.S. Coast Guard Stop 7509, 2703 Martin Luther King Jr. Avenue SE., Washington, DC 20593-7509. Correspondence relating to the subject matter of this specification shall be addressed to the Commander of the Coast Guard District in which such devices are manufactured.
(b) Pre-approval sample and plan. In order to apply for approval of a flame safety lamp for use on merchant vessels, submit one complete sample, together with four copies of an arrangement plan (parts drawings are not required), together with a statement that the lamp meets the construction requirements of Military Specification MIL-L-1204, as amended, to the Commander of the Coast Guard District who will forward same to the Commandant for determination as to its suitability for use on merchant vessels.