Collapse to view only § 160.058-5 - Labeling and marking.
- § 160.058-1 - Applicable specification.
- § 160.058-2 - Type.
- § 160.058-3 - Materials, workmanship, construction and performance requirements.
- § 160.058-4 - Inspections.
- § 160.058-5 - Labeling and marking.
§ 160.058-1 - Applicable specification.
(a) Specification. The following specification, of the issue in effect on the date the desalter kits are manufactured, forms a part of this subpart:
(1) Military specification. MIL-D-5531D—Desalter Kit, Sea Water, Mark 2.
(2) [Reserved]
(b) Copies on file. A copy of the specification referred to in this section shall be kept on file by the manufacturer, together with the approved plans and certificate of approval. The Military Specification may be obtained from the Military Specifications and Standards, Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, https://assist.daps.dla.mil/quicksearch/.
§ 160.058-2 - Type.
(a) Desalter kits specified by this subpart shall be of the type described in the specification listed in § 160.058-1(a)(1).
(b) [Reserved]
§ 160.058-3 - Materials, workmanship, construction and performance requirements.
(a) The materials, construction, workmanship, general and detail requirements shall conform to the requirements of the specification listed in § 160.058-1(a)(1), except as otherwise specifically provided by this subpart.
(b) [Reserved]
§ 160.058-4 - Inspections.
(a) Desalter kits specified by this subpart are not inspected at regularly scheduled factory inspections; however, the Commander of the Coast Guard District in which the desalter kits are manufactured may detail a marine inspector at any time to visit places where desalter kits are manufactured to check materials and construction methods and to satisfy himself that the desalter kits are being manufactured in compliance with the requirements of the specification listed in § 160.058-1(a)(1) as modified by this specification and are suitable for the intended purpose. The manufacturer shall admit the marine inspector to his plant and shall provide a suitable place and the necessary apparatus for the use of the marine inspector in conducting tests at the place of manufacture.
(b) [Reserved]
§ 160.058-5 - Labeling and marking.
(a) In addition to the marking and instructions required by the specification listed in § 160.058-1(a)(1), the Coast Guard approval number shall be included. The contract number may be omitted.
(b) [Reserved]