- § 2.75–1 - Approvals.
- § 2.75–5 - Certificates of approval.
- § 2.75–10 - Procedures for obtaining approvals.
- § 2.75–15 - Requirements and tests.
- § 2.75–25 - Portable fire extinguishers.
- § 2.75–40 - Suspension of approval.
- § 2.75–50 - Withdrawals or terminations of approvals and appeals.
- § 2.75–60 - Hazardous ships' stores.
- § 2.75–70 - Welding procedure and performance qualifications.
§ 2.75–1 - Approvals.
(a) Certain navigation and vessel inspection laws, or regulations in this chapter or in 33 CFR chapter I, require the Commandant's approval before specific types of safety equipment, materials, or installations may be installed or used on vessels subject to Coast Guard inspection, or on other described vessels, motorboats, artificial islands, and fixed structures.
(b) The Commandant's approvals are issued to persons, partnerships, companies, or corporations who offer for sale specific items of safety equipment, materials, or installations, or intend them for their own or others' use. These approvals are intended to provide a control over the quality of such approved items. The Commandant's approvals apply only to those items constructed or installed in accordance with applicable requirements, and the details as described in the documents granting specific approval. If a specific item when manufactured does not comply with these details, then it is not considered to be approved and the approval issued does not apply to such modified item. For example, if an item is manufactured with changes in design or material not previously approved, the approval does not apply to such modified item. The failure to comply with applicable requirements and details specified in the approval subjects the holder to immediate suspension of approval as described in § 2.75–40, and if necessary, to a public hearing seeking withdrawal of approval and removal of all such items from use or installation as provided in § 2.75–50.
(c) The Commandant's approvals are issued to qualified holders in the form of certificates of approval (Form CGHQ–10030), by appropriate description and identification in documents filed with the Office of the Federal Register and published in the
(d) The approvals granted to holders qualifying under the regulations in this chapter or in specifications, copies of which may be obtained from the Commandant (CG–ENG), and to which official Coast Guard numbers are assigned, will be in the form of certificates of approval. Unless specifically provided otherwise, the approval shall be valid for a period of five years from the date on the certificate of approval, but subject to suspension and/or cancellation if it is found the item offered, sold, or used as Coast Guard approved differs in any detail from the item as described in the certificate of approval and referenced material.
(e) A specific Commandant's approval granted to anyone, which is described in a certificate of approval, or a letter, or marked plans, etc., cannot be transferred to another without a specific prior authorization from the Commandant. Such a transfer without the Commandant's authorization normally terminates such approval.
(f) A listing of current and formerly approved equipment and materials may be found on the internet at: http://cgmix.uscg.mil/equipment. Each OCMI may be contacted for information concerning approved equipment.
§ 2.75–5 - Certificates of approval.
(a) The Deputy for Operations Policy and Capabilities (CG–DCO–D) or his delegate, will issue a certificate of approval to the manufacturer or party named therein and certify that such manufacturer or party has submitted satisfactory evidence that the item described therein complies with the applicable laws and regulations, which are outlined on the reverse side of the certificate.
(b) The approval shall be in effect for a period of 5 years from the date on the certificate of approval unless canceled or suspended by proper authority, or otherwise specifically stated in the certificate.
§ 2.75–10 - Procedures for obtaining approvals.
(a) The requirements for obtaining approvals of items covered by specifications and bearing official Coast Guard approval numbers are set forth in parts 159 through 164 of this chapter. For other items, the requirements are described in the regulations governing such items.
(b) Unless otherwise specified, correspondence concerning approvals should be addressed to the Commandant (CG–ENG), Attn: Office of Design and Engineering Systems, U.S. Coast Guard Stop 7509, 2703 Martin Luther King Jr. Avenue SE., Washington, DC 20593–7509. When plans, drawings, test data, etc., are required to be submitted by the manufacturer, the material being transmitted with the application should be clearly identified.
§ 2.75–15 - Requirements and tests.
(a) Approved items described in certificates of approval are usually required to meet specific requirements and/or tests, prior to obtaining the approval. Additional factory tests to determine that proper uniformity and quality controls are followed during the manufacture of the specific items may be required. These requirements governing the manufacturer in particular are set forth in the regulations in this chapter or in specifications, copies of which may be obtained from the Commandant (CG–ENG). If the requirements are met, a certificate of approval will be issued.
(b) When the specific item described in an application, together with accompanying drawings, plans, etc., does not meet applicable requirements or fails to meet specified tests, the applicant will be notified accordingly. The Coast Guard may suggest changes in order for the item to qualify and permit the issuance of an approval.
(c) For items not covered by specification requirements in parts 160 to 164, inclusive (subchapter Q—Specifications) of this chapter, the requirements in the navigation and vessel inspection laws, and applicable regulations in this chapter or in 33 CFR chapter I apply and shall be met before approvals may be issued.
§ 2.75–25 - Portable fire extinguishers.
(a) The portable fire extinguishers listed and labeled as marine type by a recognized laboratory, as provided in subpart 162.028 of part 162 of subchapter Q (Specifications) of this chapter, will be accepted as approved for use on merchant vessels, motorboats, etc., whenever required by the regulations in this chapter, and for use on artificial islands and fixed structures on the Outer Continental Shelf whenever required by the regulations in 33 CFR parts 140 to 146, inclusive.
(b) The procedures for manufacturers to follow and the requirements governing portable fire extinguishers to qualify being listed and labeled as marine type by a recognized laboratory are set forth in subpart 162.028 of part 162 of subchapter Q (Specifications) of this chapter.
(c) The procedures for a laboratory to qualify as a recognized laboratory and to be listed in § 162.028–5 of subchapter Q (Specifications) of this chapter are as follows:
(1) The laboratory shall submit an informal application in writing on its usual letterhead paper to the Commandant (CG–5PS), Attn: Director of Commercial Regulations, U.S. Coast Guard Stop 7509, 2703 Martin Luther King Jr. Avenue SE., Washington, DC 20593–7509, requesting recognition and listing, as a recognized laboratory.
(2) Accompanying the informal application, as identified enclosures, shall be:
(i) A certification that it is a laboratory which has been and is regularly engaged in the examination, testing, and evaluation of portable fire extinguishers.
(ii) A certification that it has an established factory inspection, listing, and labeling program, together with a complete description of it and how it works.
(iii) A description of its facilities used in the examination, testing, and evaluation of portable fire extinguishers, together with its name (if different from that of submitter), and location (city, street, and state).
(iv) A list of the names and home and office addresses of its principal officers and its managing directors (if any).
(v) A description of its special standards for listing and labeling portable fire extinguishers as marine type, as contemplated by the specification in subpart 162.028 of part 162 of subchapter Q (Specifications) of this chapter.
(3) If the Commandant finds that a laboratory qualifies as a recognized laboratory, and it is subject to Coast Guard jurisdiction, the approval and listing will be published on the Coast Guard's Maritime Information eXchange Web site at http://cgmix.uscg.mil/equipment and will be in effect until suspended, canceled or terminated by proper authority. The failure of a recognized laboratory to maintain its established factory inspection, listing and labeling program as approved by the Commandant shall be cause for terminating a listing as a recognized laboratory.
§ 2.75–40 - Suspension of approval.
(a) Whenever it is determined that a specific item is not in compliance with the applicable laws, rules, and regulations, and the requirements specified in the approval issued by the Coast Guard, the District Commander or the Officer in Charge, Marine Inspection, will immediately notify the holder of the approval wherein the specific item fails to meet applicable requirements. If the defects, deficiencies or variations in the item are deemed important, such officer is authorized and may immediately suspend the approval, may require the holder to surrender the certificate of approval (if any), and may direct the holder to cease claiming the defective items are Coast Guard approved, pending a final decision from the Commandant in the matter.
(b) The procedures for appealing the temporary suspension shall be those described in § 2.01–70.
§ 2.75–50 - Withdrawals or terminations of approvals and appeals.
(a) The Commandant may withdraw approval for any item which is found not to be in compliance with the conditions of approval, found to be unsuitable for its intended purpose, or does not meet the requirements of applicable regulations.
(b) Approvals of equipment are terminated when the manufacturer is no longer in business, or when the item is no longer being manufactured, or when the approval expires.
(c) Any person directly affected by a decision to deny, withdraw, or terminate an approval may appeal the decision to Director of Commercial Regulations & Standards (CG–5PS) as provided in § 1.03–15 of this chapter.
§ 2.75–60 - Hazardous ships' stores.
Hazardous ships' stores, as defined in § 147.3 of this chapter, must not be brought on board or used on any vessel unless they meet the requirements of part 147 of this chapter.
§ 2.75–70 - Welding procedure and performance qualifications.
(a) Welding procedures and welder performance utilized in the fabrication of vessels and their various systems and components subject to Coast Guard inspection shall be qualified as required by the applicable subchapter. For applicable requirements see §§ 32.60–1(a) of subchapter D (Tank Vessels), § 72.01–15 of subchapter H (Passenger Vessels), § 92.01–10 of subchapter I (Cargo and Miscellaneous Vessels), or § 190.01–10 of subchapter U (Oceanographic Vessels) of this chapter. See part 57 of subchapter F (Marine Engineering) for requirements for the welding of pressure piping, boilers, pressure vessels, and nonpressure vessel type tanks, and associated secondary barriers as defined in § 38.05–4 of subchapter D (Tank Vessels) of this chapter.