Subpart A. Subpart A-The Standard
- § 1209.1 - Scope and application.
- § 1209.2 - Definitions and measurements.
- § 1209.3 - General requirements.
- § 1209.4 - Test procedures for determining settled density.
- § 1209.5 - Test procedures for corrosiveness.
- § 1209.6 - Test procedures for critical radiant flux.
- § 1209.7 - Test procedures for smoldering combustion.
- § 1209.8 - Procedure for calibration of radiation instrumentation.
- § 1209.9 - Labeling requirement.
- § 1209.10 - Certification and enforcement.
- § 1209.11 - Effective date.
APPENDIX
- Figure 1 to Subpart A of Part 1209-Partial Insulation Preparation Apparatus
- Figure 3 to Subpart A of Part 1209-Flooring Radiant Tester Schematic Side Elevation
- Figure 4 to Subpart A of Part 1209-Flooring Radiant Panel Tester Schematic Low Flux End, Elevation
- Figure 5 to Subpart A of Part 1209-Zero Reference Point Related to Detecting Plane
- Figure 6 to Subpart A of Part 1209-Dummy Specimen in Specimen Holder
- Figure 7 to Subpart A of Part 1209-Specimen Tray
- Figure 8 to Subpart A of Part 1209-Standard Radiant Heat Energy Flux Profile
- Figure 9 to Subpart A of Part 1209-Flux Profile Data Log Format
- Figure 10 to Subpart A of Part 1209-Insulation Radiant Panel Test Data Log Format