Appendix I - Appendix I to Part 204

Table I—Sample Size Code Letters

Batch size Code letter 4 to 8A. 9 to 15B. 16 to 25C. 26 and largerD.

Table II—Sampling Plans for Inspecting Batches

Sample size code letter Test sample Test sample size Cumulative test sample size Batch inspection criteria Acceptance number Rejection number A1st4401 B1st3301 C1st3302 2d3612 D1st22( 1)2 2d24( 1)2 3d2602 4th2803 5th21013 6th21213 7th21423

1 Batch acceptance not permitted at this sample size.

Table III—Batch Sequence Plans

Sample size code letter Number batches Cumulative number batches Sequence inspection criteria Acceptance number Rejection number A221( 1) 2424 2635 2845 B220( 1) 2414 2625 2835 21046 21256 C22( 2)2 2402 2603 2813 21024 21234 D2202 2413 2624 2834

1 Batch sequence rejection not permitted for this number of batches.

2 Batch sequence acceptance not permitted for this number of batches.

Table IV—Recommended Format for Portable Air Compressor Noise Data Sheet

Test report number:Subject: Manufacturer:Model:Serial No.:Rated speed:Rpm:Rated capacity:cfm (m 3/in). Configuration identification:Category identification:Portable air compressor identification No.:Build date:Test conditions: Manufacturer's test site identification and location:Reflecting plane composition:Operating speed as tested: Beginning of testrpm End of testrpm Air pressure supplied:psi (kg/cm 2)Ambient wind speed______mph (km/hr) Actual flow rate:cfm (m 3/min.)Atmospheric pressure______psi (kg/cm 2) Temperature:°F (°C) Instrumentation: Microphone Manufacturer:Model No.:Serial No.:Sound Level Meter Manufacturer:Model No.:Serial No.:Calibrator Manufacturer:Model No.:Serial No.:Other and Manufacturer:Model No.:Serial No.:Data:
Sound levels (decibels) Background sound level at location 1 (decibels) Location 1 2 3 4 5 Average sound level (decibels) A-Weighted Tested by:Date:Reported by:Date:Supervisory personnel:Title:Title: