View all text of Subpart J [§ 471.100 - § 471.106]
§ 471.104 - Pretreatment standards for existing sources (PSES).
Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and by August 23, 1988 achieve the following pretreatment standards for existing sources (PSES). The mass of wastewater pollutants in metal powders process wastewater introduced into a POTW shall not exceed the following values:
(a) Metal powder production atomization wastewater.
Subpart J—PSES
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of powder wet atomized | Copper | 9.58 | 5.040 | Cyanide | 1.46 | 0.605 | Lead | 2.12 | 1.01 |
|---|
(b) Sizing spent emulsions.
Subpart J—PSES
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of powder sized | Copper | 0.028 | 0.015 | Cyanide | 0.004 | 0.002 | Lead | 0.006 | 0.003 |
|---|
(c) Oil-resin impregnation wastewater—subpart J—PSES.
(d) Steam treatment wet air pollution control scrubber blowdown.
Subpart J—PSES
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of powder metallurgy part steam treated | Copper | 1.51 | 0.792 | Cyanide | 0.230 | 0.095 | Lead | 0.333 | 0.159 |
|---|
(e) Tumbling, burnishing and cleaning wastewater.
Subpart J—PSES
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of powder metallurgy parts tumbled, burnished, or cleaned | Copper | 8.36 | 4.40 | Cyanide | 1.28 | 0.528 | Lead | 1.85 | 0.880 |
|---|
(f) Sawing or grinding spent neat oils—subpart J—PSES. There shall be no discharge of process watewater pollutants.
(g) Sawing or grinding spent emulsions.
Subpart J—PSES
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of powder metallurgy parts sawed or ground with emulsions | Copper | 0.035 | 0.018 | Cyanide | 0.005 | 0.002 | Lead | 0.008 | 0.004 |
|---|
(h) Sawing or grinding contact cooling water.
Subpart J—PSES
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of powder sawed or ground with contact cooling water | Copper | 3.08 | 1.62 | Cyanide | 0.470 | 0.195 | Lead | 0.681 | 0.324 |
|---|
(i) Hot pressing contact cooling water.
Subpart J—PSES
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of powder cooled after pressing | Copper | 16.7 | 8.80 | Cyanide | 2.55 | 1.06 | Lead | 3.70 | 1.76 |
|---|
(j) Mixing wet air pollution control scrubber blowdown.
Subpart J—PSES
| Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | mg/off-kg (pounds per million off-pounds) of powder mixed | Copper | 15.0 | 7.90 | Cyanide | 2.29 | 0.948 | Lead | 3.32 | 1.58 |
|---|
(k) Degreasing spent solvents—subpart J—PSES. There shall be no discharge of process wastewater pollutants.