Table 3 to Subpart BBBB of Part 60—Model Rule—Class I Nitrogen Oxides Emission Limits for Existing Small Municipal Waste Combustion Units a b c

- Table 3 to Subpart BBBB of Part 60—Model Rule—Class I Nitrogen Oxides Emission Limits for Existing Small Municipal Waste Combustion Units a b c

Municipal waste combustion technology	Limits for class I municipal waste combustion units	1. Mass burn waterwall	200 parts per million by dry volume.	2. Mass burn rotary waterwall	170 parts per million by dry volume.	3. Refuse-derived fuel	250 parts per million by dry volume.	4. Fluidized bed	220 parts per million by dry volume.	5. Mass burn refractory	350 parts per million by dry volume.	6. Modular excess air	190 parts per million by dry volume.	7. Modular starved air	380 parts per million by dry volume.

a Class I units mean small municipal waste combustion units subject to this subpart that are located at municipal waste combustion plants with an aggregate plant combustion capacity greater than 250 tons per day of municipal solid waste. See § 60.1940 for definitions.

b Nitrogen oxides limits are measured at 7 percent oxygen.

c All limits are 24-hour daily block arithmetic average concentration. Compliance is determined for Class I units by continuous emission monitoring systems.