Subpart KKKKa. Subpart KKKKa—Standards of Performance for Stationary Combustion Turbines

• Introduction

  • SECTION § 60.4300a - What is the purpose of this subpart?

• Applicability

  • SECTION § 60.4305a - Does this subpart apply to my stationary combustion turbine?
  • SECTION § 60.4310a - What stationary combustion turbines are not subject to this subpart?

• Emission Standards

  • SECTION § 60.4315a - What pollutants are regulated by this subpart?
  • SECTION § 60.4320a - What NOX emissions standard must I meet?
  • SECTION § 60.4325a - What emission limit must I meet for NOX if my turbine burns both natural gas and distillate oil (or some other combination of fuels)?
  • SECTION § 60.4330a - What SO2 emissions standard must I meet?
  • SECTION § 60.4331a - What are the requirements for operating a stationary temporary combustion turbine?

• General Compliance Requirements

  • SECTION § 60.4333a - What are my general requirements for complying with this subpart?

• Monitoring

  • SECTION § 60.4335a - How do I demonstrate compliance with my NOX emissions standard without using a NOX CEMS if I use water or steam injection?
  • SECTION § 60.4340a - How do I demonstrate compliance with my NOX emissions standard without using a NOX CEMS if I do not use water or steam injection?
  • SECTION § 60.4342a - How do I monitor NOX control operating parameters?
  • SECTION § 60.4345a - How do I demonstrate compliance with my NOX emissions standard using a NOX CEMS?
  • SECTION § 60.4350a - How do I use the NOX CEMS data to determine excess emissions?
  • SECTION § 60.4360a - How do I use fuel sulfur analysis to determine the total sulfur content of the fuel combusted in my stationary combustion turbine?
  • SECTION § 60.4370a - How frequently must I determine the fuel sulfur content?
  • SECTION § 60.4372a - How can I demonstrate compliance with my SO2 emissions standard using records of the fuel sulfur content?
  • SECTION § 60.4374a - How do I demonstrate compliance with my SO2 emissions standard and determine excess emissions using a SO2 CEMS?

• Recordkeeping and Reporting

  • SECTION § 60.4375a - What reports must I submit?
  • SECTION § 60.4380a - How are NOX excess emissions and monitor downtime reported?
  • SECTION § 60.4385a - How are SO2 excess emissions and monitor downtime reported?
  • SECTION § 60.4390a - What records must I maintain?
  • SECTION § 60.4395a - When must I submit my reports?

• Performance Tests

  • SECTION § 60.4400a - How do I conduct performance tests to demonstrate compliance with my NOX emissions standard if I do not have a NOX CEMS?
  • SECTION § 60.4405a - How do I conduct a performance test if I use a NOX CEMS?
  • SECTION § 60.4415a - How do I conduct performance tests to demonstrate compliance with my SO2 emissions standard?

• Other Requirements and Information

  • SECTION § 60.4416a - What parts of the general provisions apply to my affected EGU?
  • SECTION § 60.4417a - Who implements and enforces this subpart?
  • SECTION § 60.4420a - What definitions apply to this subpart?

• APPENDIX

  • Table 1 to Subpart KKKKa of Part 60—Nitrogen Oxide Emission Standards for Stationary Combustion Turbines
  • Table 2 to Subpart KKKKa of Part 60—Alternative Mass-Based NOX Emission Standards for Stationary Combustion Turbines
  • Table 3 to Subpart KKKKa of Part 60—Applicability of Subpart A of This Part to This Subpart