§ 28.135 - Lifesaving equipment markings.
(a) Except as provided in paragraph (d) of this section, lifesaving equipment carried aboard a vessel pursuant to the requirements of this subpart or part 25, subpart 25.25 of this chapter must be marked as specified in table 28.135.
(b) Lettering used in lifesaving equipment markings must be in block capital letters.
(c) Retroreflective markings required by this section must be with material approved under part 164, subpart 164.018 of this chapter. The arrangement of the retroreflective material must meet IMO Resolution A.658(16).
(d) A wearable personal flotation device must be marked with the name of either the vessel, the owner of the device, or the individual to whom it is assigned.
Table 28.135 - Lifesaving Equipment Markings
|Name of vessel||Retroreflective material|
|Wearable personal flotation device (Type I, II, III, or wearable Type V); Immersion suit or exposure suit||See § 28.135(d)||Type I or Type II.|
|Ring life buoy||X||Type II.|
|Inflatable liferaft||See note||See note.|
|Inflatable buoyant apparatus||See note||See note.|
|Life float||X||Type II.|
|Buoyant apparatus||X||Type II.|
|Auxiliary craft||X||Type II.|
No marking other than that provided by the manufacturer and the servicing facility is required.