Part 192. undefined

• SUBPART A [§ 192.1 - § 192.18] - Subpart A—General
• SUBPART B [§ 192.51 - § 192.69] - Subpart B—Materials
• SUBPART C [§ 192.101 - § 192.127] - Subpart C—Pipe Design
• SUBPART D [§ 192.141 - § 192.205] - Subpart D—Design of Pipeline Components
• SUBPART E [§ 192.221 - § 192.245] - Subpart E—Welding of Steel in Pipelines
• SUBPART F [§ 192.271 - § 192.287] - Subpart F—Joining of Materials Other Than by Welding
• SUBPART G [§ 192.301 - § 192.329] - Subpart G—General Construction Requirements for Transmission Lines and Mains
• SUBPART H [§ 192.351 - § 192.385] - Subpart H—Customer Meters, Service Regulators, and Service Lines
• SUBPART I [§ 192.451 - § 192.493] - Subpart I—Requirements for Corrosion Control
• SUBPART J [§ 192.501 - § 192.517] - Subpart J—Test Requirements
• SUBPART K [§ 192.551 - § 192.557] - Subpart K—Uprating
• SUBPART L [§ 192.601 - § 192.636] - Subpart L—Operations
• SUBPART M [§ 192.701 - § 192.756] - Subpart M—Maintenance
• SUBPART N [§ 192.801 - § 192.809] - Subpart N—Qualification of Pipeline Personnel
• SUBPART O [§ 192.901 - § 192.951] - Subpart O—Gas Transmission Pipeline Integrity Management
• SUBPART P [§ 192.1001 - § 192.1015] - Subpart P—Gas Distribution Pipeline Integrity Management (IM)
• SUBPART 0 -

• APPENDIX

  • Appendix A to Part 192 [Reserved]
  • Appendix B to Part 192—Qualification of Pipe and Components
  • Appendix C to Part 192—Qualification of Welders for Low Stress Level Pipe
  • Appendix D to Part 192—Criteria for Cathodic Protection and Determination of Measurements
  • Appendix E to Part 192—Guidance on Determining High Consequence Areas and on Carrying out Requirements in the Integrity Management Rule
  • Appendix F to Part 192—Criteria for Conducting Integrity Assessments Using Guided Wave Ultrasonic Testing (GWUT)
  • Appendix G to Part 192—Guidance on Moderate Consequence Areas