Appendix C - Appendix C to Part 564—Information Applicable to Standardized Sealed Beam Headlamp Units

I. Dimensional Information Specific to a Type of Standardized Sealed Beam Unit.

A. Dimensions marked “I”, indicating interchangeability, for which conformance is mandatory.

B. All other dimensions which are for design purposes.

II. Dimensional Information Applicable to the Use of Nonadjustable Headlamp Aiming Device Locating Plates III. Dimensional Information Applicable to Mounting Features, Including Mounting Rings and Lamp Bodies, Specific to a Type of Standardized Sealed Beam Unit

A. Dimensions marked “I”, indicating interchangeability, for which conformance is mandatory.

B. All other dimensions which are for design purposes.

Incorporated Figures [References from 49 CFR 571.108, Oct. 1, 2006] LF Headlamp Dimensional Information [Figure 11] UF Headlamp Dimensional Information [Figure 12] LF/UF Mounting Features [Figure 13] LF/UF Mounting Ring [Figure 14] Type G & H Headlamp Dimensional Information [Figure 18] Type G & H Headlamp Mounting Information [Figure 21] Type 1A1 Headlamp Dimensional Information [SAE J1383 APR85, Figure 11] Type 2A1 Headlamp Dimensional Information [SAE J1383 APR85, Figure 10] Type 2B1 Headlamp Dimensional Information [SAE J1383 APR85, Figure 13] Type 1C1 Headlamp Dimensional Information [SAE J1383 APR85, Figure 7] Type 2C1 Headlamp Dimensional Information [SAE J1383 APR85, Figure 8] Type 2D1 Headlamp Dimensional Information [SAE J1383 APR85, Figure 5] Type 2E1 Headlamp Dimensional Information [SAE J1383 APR85, Figure 15] Types 1A1, 2A1, and 2E1 Headlamp Mounting Ring/Lamp Body Dimensional Information [SAE J1383 APR85, Figure 12] Type 2B1 Headlamp Mounting Ring/Lamp Body Dimensional Information [SAE J1383 APR85, Figure 14] Types 1C1and 2C1 Headlamp Mounting Ring/Lamp Body Dimensional Information [SAE J1383 APR85, Figure 9] Type 2D1 Headlamp Mounting Ring/Lamp Body Dimensional Information [SAE J1383 APR85, Figure 6]